Re: [PATCH] memory hotadd fixes [4/5] avoid check in acpi

From: keith mannthey
Date: Thu Aug 03 2006 - 23:21:33 EST


On Fri, 2006-08-04 at 12:13 +0900, KAMEZAWA Hiroyuki wrote:
> On Thu, 03 Aug 2006 20:00:08 -0700
> keith mannthey <kmannth@xxxxxxxxxx> wrote:
>
>
> > > > What protecting is there for calling add_memory on an already present
> > > > memory range?
> > > >
> > > For example, considering ia64, which has 1Gbytes section...
> >
> > Maybe 1gb sections is too large?
> >
> ia64 machines sometimes to have crazy big memory...so 1gb section is requested.
> Configurable section_size for small machines was rejected in old days.

My HW supports about 512gb......

What if you add a partial section. Then online in sysfs and add another
section? messy....
>
> > > hot add following region.
> > > ==
> > > (A) 0xc0000000 - 0xd7ffffff (section 3)
> > > (B) 0xe0000000 - 0xffffffff (section 3)
> > > ==
> > > (A) and (B) will go to the same section, but there is a memory hole between
> > > (A) and (B). Considering memory (B) appears after (A) in DSDT.
> > >
> > > After add_memory() against (A) is called, section 3 is ready.
> > > Then, pfn_valid(0xe0000000) and pfn_valid(0xffffffff) returns true because
> > > they are in section 3.
> > > So, checking pfn_valid() for (B) will returns true and memory (B) cannot be
> > > added. ioresouce collision check will help this situation.
> >
> > With iommus out there throwing aliment all off way the flexability is
> > good.
> >
> > My question is this.
> >
> > Assuming 0-0xbfffffff is present.
> >
> > What keeps 0xa0000000 to 0xa1000000 from being re-onlined by a bad call
> > to add_memory?
>
> Usual sparsemem's add_memory() checks whether there are sections in
> sparse_add_one_section(). then add_pages() returns -EEXIST (nothing to do).
> And ioresouce collision check will finally find collision because 0-0xbffffff
> resource will conflict with 0xa0000000 to 0xa10000000 area.
> But, x86_64 's (not sparsemem) add_pages() doen't do collision check, so it panics.

I have paniced with your 5 patches while doing SPARSMEM.... I think
your 6th patch address the issues I was seeing.

Thanks,
Keith

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/