Re: sata_mv module fails to load properly with 3 Supermicro AOC-SAT2-MV8 cards

[Sander]

Michael Robak wrote (ao):
> It apears that having multiple bus speeds is not the cause of my issue.
> I was able to get the sata_mv module initalization to hang even when I
> had only 2 cards plugged into both of the 100 MHz slots. This issue is
> extremely difficult to diagnose. Sometimes the sata_mv module will load
> just fine and recognize 24 drives, others it will hang the system during
> intalization, and others it will only fine 23 drives, but the
> initalization completes.
> 
> Any help would be appreciated,

I'm affraid I can't help you much. Mark Lord works on getting the driver
stable on 2.6.16.x kernels. After that he wants to port forward the
changes.

FWIW, there is quite a big libata update which I assume goes into
2.6.17-rc4-mm2. Maybe that helps?

	With kind regards, Sander

-- 
Humilis IT Services and Solutions
http://www.humilis.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/