Fix some spelling in 2.6.16.4 Makefile

[linux-os (Dick Johnson)]

I attached a patch just in case the mailer kills this.
This should be picked up by the janitor(s) so I didn't bother
with a "signed off"... The top-level Makefile has been getting
a few spelling errors over the years so it's probably time to fis.


--- /usr/src/linux-2.6.16.4/Makefile.orig	2006-04-20 10:07:43.000000000 -0400
+++ /usr/src/linux-2.6.16.4/Makefile	2006-04-20 10:35:32.000000000 -0400
@@ -197,7 +197,7 @@
  #	If we have only "make modules", don't compile built-in objects.
  #	When we're building modules with modversions, we need to consider
  #	the built-in objects during the descend as well, in order to
-#	make sure the checksums are uptodate before we record them.
+#	make sure the checksums are up to date before we record them.

  ifeq ($(MAKECMDGOALS),modules)
    KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
@@ -230,7 +230,7 @@
  #
  # If $(quiet) is empty, the whole command will be printed.
  # If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
  # the variable $(silent_cmd_cc_o_c) doesn't exist.
  #
  # A simple variant is to prefix commands with $(Q) - that's useful
@@ -378,7 +378,7 @@

  .PHONY: outputmakefile
  # outputmakefile generate a Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
+# using a separate output directory. This allows convenient use
  # of make in output directory
  outputmakefile:
  	$(Q)if test ! $(srctree) -ef $(objtree); then \
@@ -451,7 +451,7 @@
  ifeq ($(KBUILD_EXTMOD),)
  # Additional helpers built in scripts/
  # Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
+# in parallel
  .PHONY: scripts
  scripts: scripts_basic include/config/MARKER
  	$(Q)$(MAKE) $(build)=$(@)
@@ -482,7 +482,7 @@

  # If .config is newer than include/linux/autoconf.h, someone tinkered
  # with it and forgot to run make oldconfig.
-# If kconfig.d is missing then we are probarly in a cleaned tree so
+# If kconfig.d is missing then we are probably in a cleaned tree so
  # we execute the config step to be sure to catch updated Kconfig files
  include/linux/autoconf.h: .kconfig.d .config
  	$(Q)mkdir -p include/linux
@@ -495,7 +495,7 @@
  # The all: target is the default when no target is given on the
  # command line.
  # This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
  all: vmlinux

  ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -530,11 +530,11 @@
  # warn about C99 declaration after statement
  CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)

-# disable pointer signedness warnings in gcc 4.0
+# disable pointer signed / unsigned warnings in gcc 4.0
  CFLAGS += $(call cc-option,-Wno-pointer-sign,)

  # Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
  # set in the environment
  # Also any assignments in arch/$(ARCH)/Makefile take precedence over
  # this default value
@@ -548,7 +548,7 @@
  #
  # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
  # relocations required by build roots.  This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
  #

  MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
@@ -577,7 +577,7 @@

  # Build vmlinux
  # ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
  # $(vmlinux-main). Most are built-in.o files from top-level directories
  # in the kernel tree, others are specified in arch/$(ARCH)Makefile.
  # Ordering when linking is important, and $(vmlinux-init) must be first.
@@ -778,7 +778,7 @@

  # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
  # and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determinded by the SCM used.
+# The appended tag is determined by the SCM used.
  #
  # Currently, only git is supported.
  # Other SCMs can edit scripts/setlocalversion and add the appropriate
@@ -1140,7 +1140,7 @@
  # make M=dir modules   Make all modules in specified dir
  # make M=dir	       Same as 'make M=dir modules'
  # make M=dir modules_install
-#                      Install the modules build in the module directory
+#                      Install the modules built in the module directory
  #                      Assumes install directory is already created

  # We are always building modules
@@ -1214,7 +1214,7 @@
  ALLINCLUDE_ARCHS := $(ARCH)
  endif
  else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
  ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
  endif


Cheers,
Dick Johnson
Penguin : Linux version 2.6.16.4 on an i686 machine (5592.89 BogoMips).
Warning : 98.36% of all statistics are fiction, book release in April.
_



****************************************************************
The information transmitted in this message is confidential and may be privileged.  Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited.  If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to DeliveryErrors@xxxxxxxxxxxx - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.--- /usr/src/linux-2.6.16.4/Makefile.orig	2006-04-20 10:07:43.000000000 -0400
+++ /usr/src/linux-2.6.16.4/Makefile	2006-04-20 10:35:32.000000000 -0400
@@ -197,7 +197,7 @@
 #	If we have only "make modules", don't compile built-in objects.
 #	When we're building modules with modversions, we need to consider
 #	the built-in objects during the descend as well, in order to
-#	make sure the checksums are uptodate before we record them.
+#	make sure the checksums are up to date before we record them.
 
 ifeq ($(MAKECMDGOALS),modules)
   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
@@ -230,7 +230,7 @@
 #
 # If $(quiet) is empty, the whole command will be printed.
 # If it is set to "quiet_", only the short version will be printed. 
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
 # the variable $(silent_cmd_cc_o_c) doesn't exist.
 #
 # A simple variant is to prefix commands with $(Q) - that's useful
@@ -378,7 +378,7 @@
 
 .PHONY: outputmakefile
 # outputmakefile generate a Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
+# using a separate output directory. This allows convenient use
 # of make in output directory
 outputmakefile:
 	$(Q)if test ! $(srctree) -ef $(objtree); then \
@@ -451,7 +451,7 @@
 ifeq ($(KBUILD_EXTMOD),)
 # Additional helpers built in scripts/
 # Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
+# in parallel
 .PHONY: scripts
 scripts: scripts_basic include/config/MARKER
 	$(Q)$(MAKE) $(build)=$(@)
@@ -482,7 +482,7 @@
 
 # If .config is newer than include/linux/autoconf.h, someone tinkered
 # with it and forgot to run make oldconfig.
-# If kconfig.d is missing then we are probarly in a cleaned tree so
+# If kconfig.d is missing then we are probably in a cleaned tree so
 # we execute the config step to be sure to catch updated Kconfig files
 include/linux/autoconf.h: .kconfig.d .config
 	$(Q)mkdir -p include/linux
@@ -495,7 +495,7 @@
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -530,11 +530,11 @@
 # warn about C99 declaration after statement
 CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
-# disable pointer signedness warnings in gcc 4.0
+# disable pointer signed / unsigned warnings in gcc 4.0
 CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
 # set in the environment
 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 # this default value
@@ -548,7 +548,7 @@
 #
 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 # relocations required by build roots.  This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
 #
 
 MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
@@ -577,7 +577,7 @@
 
 # Build vmlinux
 # ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
 # $(vmlinux-main). Most are built-in.o files from top-level directories
 # in the kernel tree, others are specified in arch/$(ARCH)Makefile.
 # Ordering when linking is important, and $(vmlinux-init) must be first.
@@ -778,7 +778,7 @@
 	       
 # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
 # and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determinded by the SCM used.
+# The appended tag is determined by the SCM used.
 #
 # Currently, only git is supported.
 # Other SCMs can edit scripts/setlocalversion and add the appropriate
@@ -1140,7 +1140,7 @@
 # make M=dir modules   Make all modules in specified dir
 # make M=dir	       Same as 'make M=dir modules'
 # make M=dir modules_install
-#                      Install the modules build in the module directory
+#                      Install the modules built in the module directory
 #                      Assumes install directory is already created
 
 # We are always building modules
@@ -1214,7 +1214,7 @@
 ALLINCLUDE_ARCHS := $(ARCH)
 endif
 else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
 endif