Re: libata PATA drivers patch for 2.6.16-rc4

From: Francesco Biscani
Date: Mon Feb 20 2006 - 16:24:44 EST


On Monday 20 February 2006 15:19, Alan Cox wrote:
> Various fixes and cleanups, some new functionality notably Promise
> 20246/2026x support which although basic should get it going with disk.
> Not 100% sure about ATAPI on PDC2026x yet.
>
> http://zeniv.linux.org.uk/~alan/IDE

Got an Ali chipset here, it booted fine.

Feb 20 22:06:17 kurtz Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 20 22:06:17 kurtz ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
Feb 20 22:06:17 kurtz libata version 1.20 loaded.
Feb 20 22:06:17 kurtz ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
Feb 20 22:06:17 kurtz ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x2040
irq 14
Feb 20 22:06:17 kurtz ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469
86:3e48 87:4023 88:203f
Feb 20 22:06:17 kurtz ata1: dev 0 ATA-6, max UDMA/100, 78140160 sectors: LBA48
Feb 20 22:06:17 kurtz ata1: dev 0 configured for UDMA/100
Feb 20 22:06:17 kurtz scsi0 : ali
Feb 20 22:06:17 kurtz Vendor: ATA Model: IC25N040ATMR04-0 Rev: MO2O
Feb 20 22:06:17 kurtz Type: Direct-Access ANSI SCSI
revision: 05
Feb 20 22:06:17 kurtz ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2048
irq 15
Feb 20 22:06:17 kurtz ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000
86:0000 87:0000 88:0000
Feb 20 22:06:17 kurtz ata2: dev 0 ATAPI, max MWDMA2
Feb 20 22:06:17 kurtz ata2: dev 0 configured for MWDMA2
Feb 20 22:06:17 kurtz scsi1 : ali
Feb 20 22:06:17 kurtz ata2(0): WARNING: ATAPI is disabled, device ignored.
Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008
MB)
Feb 20 22:06:17 kurtz sda: Write Protect is off
Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00
Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back
Feb 20 22:06:17 kurtz SCSI device sda: 78140160 512-byte hdwr sectors (40008
MB)
Feb 20 22:06:17 kurtz sda: Write Protect is off
Feb 20 22:06:17 kurtz sda: Mode Sense: 00 3a 00 00
Feb 20 22:06:17 kurtz SCSI device sda: drive cache: write back
Feb 20 22:06:17 kurtz sda: sda1 sda2 sda3 < sda5 sda6 > sda4
Feb 20 22:06:17 kurtz sd 0:0:0:0: Attached scsi disk sda

The CDROM on the second ide channel was not recognized (what's up with that
WARNING?). And the HD was pretty slow (around 1-2 MB/s), I guess that's
because UDMA support is not there yet?

Regards,

Francesco


--
Dr. Francesco Biscani
Dipartimento di Astronomia
Università di Padova
biscani@xxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/