Re: RFC: Compact Flash True IDE Mode Driver

[Kumar Gala]

> > Now I'm confused.  If I understand the code, what I want is for the
> > "io_32bit" setting to have its RW field set to SETTING_READ, such
> > that drive->no_io_32bit can NOT be changed.  Additionally, I want it
> > set to 1 if hwif->no_io_32bit is 1.
>
> Yes.
>
> > Are you saying that at the end of probe_hwif() I should iterate over
> > the drives for that hwif and set drive->no_io_32bit to 1 if hwif-
> > > no_io_32bit is 1?  If so, can I do this in the last loop that
> > already exists that iterates over the drives?
>
> Well, no - this loop is for tuning and is already over-complicated.
>
> > Will I not also want to test hwif->no_io_32bit in idedisk_setup() to
> > ensure that it can only set driver->no_io_32bit to 0 if hwif-
> > > no_io32bit is 0?
>
> No, you want to move this code to ide-probe.c because of the
> reason given in my last mail: setting drive->no_io_32bit in ide-disk
> is too late w.r.t. ide_add_generic_settings():
>
> init_gendisk()->hwif_init()->ide_add_generic_settings()
>
> so drive->no_io_32bit flag needs to be set earlier
> (probe_hwif() is OK).

Will drive->id->dword_io be valid by the end of probe_hwif()?

> And yes, this IDE stuff is complicated... :)

That it is ;)

- kumar
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/