Re: 2.6.16, sk98lin out of date

[Mws]

On Monday 13 February 2006 11:58, you wrote:
> Hi,
> 
> As I'm sure the drivers/net maintainers are well aware, SysKonnect constantly 
> update their sk98lin/sky2 driver without bothering to sync their changes with 
> the official linux kernel.
> 
> I quickly downloaded driver version 8.31 from http://www.skd.de/ today and 
> used the install script to generate a diff against 2.6.16-rc3. Even after 
> fixing up some DOS EOLs in the package, the diff was still well over 1.5MBs. 
> This is an enormous number of changes.
> 
> The reason I'm posting is that my DFI LanParty-UT SLI-D works with this 
> version of the driver, but not the version 2.6.16-rc3.
> 
> [alistair] 10:55 [~] dmesg | grep sk98lin
> sk98lin: Could not read VPD data.
> sk98lin: probe of 0000:01:0a.0 failed with error -5
> 
> I wonder if it's worth just identifying the "quick fix" (I've seen workarounds 
> for corrupt VPDs like mine) or whether a general merge up would be 
> beneficial..
> 
> If nobody's maintaining this driver I wouldn't mind helping out.
> 
hi,
as i do have the same problem i may help you out.

at first, syskonnect did send their kernel diffs/patches but they we're rejected caused
by coding style, indention and some people thinking that things can be done better.

i personally do apply these drivers with the generate patch function of the install.sh.

there were small modifications within kernel 2.6.16 with i also sended as a diff to syskonnect, 
but got not reply.

i attached the diff, maybe it helps ya out. it works with my 2 onboard marvell yukon gbit adapters.

regards
marcel

diff -ruN linux/drivers/net/sk98lin/h/skdrv2nd.h linux-new/drivers/net/sk98lin/h/skdrv2nd.h
--- linux/drivers/net/sk98lin/h/skdrv2nd.h	2006-01-18 10:11:04.000000000 +0100
+++ linux-new/drivers/net/sk98lin/h/skdrv2nd.h	2005-09-29 10:26:12.000000000 +0200
@@ -61,7 +61,7 @@
 #ifdef HAVE_POLL_CONTROLLER
 #define SK_POLL_CONTROLLER
 #define CONFIG_SK98LIN_NAPI
+#elif defined CONFIG_NET_POLL_CONTROLLER
-#elif CONFIG_NET_POLL_CONTROLLER
 #define SK_POLL_CONTROLLER
 #define CONFIG_SK98LIN_NAPI
 #endif
diff -ruN linux/drivers/net/sk98lin/skge.c linux-new/drivers/net/sk98lin/skge.c
--- linux/drivers/net/sk98lin/skge.c	2006-01-18 10:22:44.000000000 +0100
+++ linux-new/drivers/net/sk98lin/skge.c	2005-09-29 10:26:12.000000000 +0200
@@ -107,7 +107,7 @@
 static int 	__devinit sk98lin_init_device(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void 	sk98lin_remove_device(struct pci_dev *pdev);
 #ifdef CONFIG_PM
+static int	sk98lin_suspend(struct pci_dev *pdev, pm_message_t state);
-static int	sk98lin_suspend(struct pci_dev *pdev, u32 state);
 static int	sk98lin_resume(struct pci_dev *pdev);
 static void	SkEnableWOMagicPacket(SK_AC *pAC, SK_IOC IoC, SK_MAC_ADDR MacAddr);
 #endif
@@ -971,7 +971,7 @@
  */
 static int sk98lin_suspend(
 struct pci_dev	*pdev,   /* pointer to the device that is to suspend */
+pm_message_t	state)  /* what power state is desired by Linux?    */
-u32		state)  /* what power state is desired by Linux?    */
 {
 	struct net_device   *dev  = pci_get_drvdata(pdev);
 	DEV_NET		    *pNet = (DEV_NET*) dev->priv;
@@ -1024,7 +1024,7 @@
 #else
 	pci_save_state(pdev, pAC->PciState);
 #endif
+	pci_set_power_state(pdev, pci_choose_state(pdev, state)); /* set the state */
-	pci_set_power_state(pdev, state); /* set the state */
 
 	return 0;
 }
diff -ruN linux/drivers/net/sk98lin/sky2.c linux-new/drivers/net/sk98lin/sky2.c
--- linux/drivers/net/sk98lin/sky2.c	2006-01-18 10:51:36.000000000 +0100
+++ linux-new/drivers/net/sk98lin/sky2.c	2005-09-29 10:26:12.000000000 +0200
@@ -33,7 +33,7 @@
 #include "h/skdrv1st.h"
 #include "h/skdrv2nd.h"
 #include <linux/tcp.h>
+#include <linux/ip.h>
-
 /******************************************************************************
  *
  * Local Function Prototypes
@@ -337,7 +337,7 @@
 			PUSH_PKT_AS_LAST_IN_QUEUE(&pAC->TxPort[Port][0].TxQ_free, pSkPacket);
 			POP_FIRST_PKT_FROM_QUEUE(&pAC->TxPort[Port][0].TxAQ_working, pSkPacket);
 		}
+#ifdef USE_SYNC_TX_QUEUE
-#if USE_SYNC_TX_QUEUE
 		POP_FIRST_PKT_FROM_QUEUE(&pAC->TxPort[Port][0].TxSQ_working, pSkPacket);
 		while (pSkPacket != NULL) {
 			if ((pSkFrag = pSkPacket->pFrag) != NULL) {
@@ -902,7 +902,7 @@
 	pAC->TxPort[Port][TX_PRIO_LOW].TxAQ_waiting.pTail = NULL;
 	spin_lock_init(&pAC->TxPort[Port][TX_PRIO_LOW].TxAQ_waiting.QueueLock);
 	
+#ifdef USE_SYNC_TX_QUEUE
-#if USE_SYNC_TX_QUEUE
 	pAC->TxPort[Port][TX_PRIO_LOW].TxSQ_working.pHead = NULL;
 	pAC->TxPort[Port][TX_PRIO_LOW].TxSQ_working.pTail = NULL;
 	spin_lock_init(&pAC->TxPort[Port][TX_PRIO_LOW].TxSQ_working.QueueLock);
@@ -2311,7 +2311,7 @@
 					SK_DBG_MSG(pAC, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
 						("No changes for TxA%d\n", Port + 1));
 				}
+#ifdef USE_SYNC_TX_QUEUE
-#if USE_SYNC_TX_QUEUE
 				if (HW_SYNC_TX_SUPPORTED(pAC)) {
 					/* 
 					** Do we have a new Done idx ?

Attachment: pgp00000.pgp
Description: PGP signature