Re: kobject_register failed for Promise_Old_IDE (-17)

From: Vasil Kolev
Date: Wed Jan 25 2006 - 02:53:27 EST


Ð ÐÑ, 2006-01-24 Ð 23:58 +0100, Bartlomiej Zolnierkiewicz ÐÐÐÐÑÐ:
> On 1/24/06, Greg KH <greg@xxxxxxxxx> wrote:
> > On Tue, Jan 24, 2006 at 11:08:47AM +0200, Vasil Kolev wrote:
> > > Hello,
> > > I have a machine that's currently running 2.4.28 with the promise_old
> > > driver, which runs ok. I tried upgrading it last night to 2.6.15, and
> > > the following error occured, and no drives were detected/made available:
> > >
> > > [17179598.940000] kobject_register failed for Promise_Old_IDE (-17)
> > > [17179598.940000] [dump_stack+21/23] dump_stack+0x15/0x17
> > > [17179598.940000] [kobject_register+52/64] kobject_register+0x34/0x40
> > > [17179598.940000] [bus_add_driver+69/163] bus_add_driver+0x45/0xa3
> > > [17179598.940000] [driver_register+57/60] driver_register+0x39/0x3c
> > > [17179598.940000] [__pci_register_driver+125/132] __pci_register_driver+0x7d/0x84
> > > [17179598.940000] [__ide_pci_register_driver+19/53] __ide_pci_register_driver+0x13/0x35
> > > [17179598.940000] [pg0+945449588/1069855744] pdc202xx_ide_init+0x12/0x16 [pdc202xx_old]
> > > [17179598.940000] [sys_init_module+193/430] sys_init_module+0xc1/0x1ae
> > > [17179598.940000] [syscall_call+7/11] syscall_call+0x7/0xb
> >
> > This means that some other driver tried to register with the same exact
> > name for the same bus. As it looks like this is the ide bus, I suggest
> > asking on the linux ide mailing list.
>

Well, now I remember that in /sys in the proper place there were two
directories called Promise_Old_IDE, maybe the driver tried to register
twice?

> I don't see a way how this can happen. There is only one driver with
> .name = "Promise_Old_IDE" and code dealing with driver registration
> looks more or less sane (+ hasn't been changed recently except
> .owner fixes).
>
> Vasil, are you using vanilla 2.6.15 without any distro etc patches?
> [ just to be 100% sure ]
>
Yes, plain vanilla 2.6.15.

> Could you send dmesg command output?
>
Here it is (the -scx1 is to help me track revisions of the configuration
I use):


[17179569.184000] Linux version 2.6.15-scx1 (root@hades) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 SMP Mon Jan 23 22:38:46 CET 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 0000000000098c00 (usable)
[17179569.184000] BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000da000 - 00000000000dc000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[17179569.184000] BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data)
[17179569.184000] BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable)
[17179569.184000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f6a20
[17179569.184000] On node 0 totalpages: 524160
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 294784 pages, LIFO batch:31
[17179569.184000] DMI present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6a50
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7fefb83a
[17179569.184000] ACPI: FADT (v001 Intel SE7500CW 0x06040000 PTL 0x00000008) @ 0x7fefee78
[17179569.184000] ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7fefeeec
[17179569.184000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fefef3c
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fefefd8
[17179569.184000] ACPI: DSDT (v001 INTEL PLUMAS 0x06040000 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[17179569.184000] Processor #6 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[17179569.184000] Processor #7 15:2 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
[17179569.184000] IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 3 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fec80000)
[17179569.184000] mapped IOAPIC to ffffa000 (fec80400)
[17179569.184000] Initializing CPU#0
[17179569.184000] CPU 0 irqstacks, hard=c0363000 soft=c035b000
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1993.759 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.580000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.580000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.752000] Memory: 2075128k/2096640k available (1529k kernel code, 20312k reserved, 648k data, 208k init, 1179072k highmem)
[17179569.752000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.836000] Calibrating delay using timer specific routine.. 3992.20 BogoMIPS (lpj=7984418)
[17179569.836000] Mount-cache hash table entries: 512
[17179569.836000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.836000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.836000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179569.836000] CPU: L2 cache: 512K
[17179569.836000] CPU: Physical Processor ID: 0
[17179569.836000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179569.836000] Intel machine check architecture supported.
[17179569.836000] Intel machine check reporting enabled on CPU#0.
[17179569.836000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[17179569.836000] mtrr: v2.0 (20020519)
[17179569.836000] Enabling fast FPU save and restore... done.
[17179569.836000] Enabling unmasked SIMD FPU exception support... done.
[17179569.836000] Checking 'hlt' instruction... OK.
[17179569.856000] CPU0: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
[17179569.860000] Booting processor 1/1 eip 2000
[17179569.860000] CPU 1 irqstacks, hard=c0364000 soft=c035c000
[17179569.868000] Initializing CPU#1
[17179569.948000] Calibrating delay using timer specific routine.. 3987.39 BogoMIPS (lpj=7974792)
[17179569.948000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.948000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.948000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179569.948000] CPU: L2 cache: 512K
[17179569.948000] CPU: Physical Processor ID: 0
[17179569.948000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179569.948000] Intel machine check architecture supported.
[17179569.948000] Intel machine check reporting enabled on CPU#1.
[17179569.948000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[17179569.948000] CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
[17179569.948000] Booting processor 2/6 eip 2000
[17179569.948000] CPU 2 irqstacks, hard=c0365000 soft=c035d000
[17179569.956000] Initializing CPU#2
[17179570.040000] Calibrating delay using timer specific routine.. 3987.43 BogoMIPS (lpj=7974865)
[17179570.040000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.040000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.040000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179570.040000] CPU: L2 cache: 512K
[17179570.040000] CPU: Physical Processor ID: 3
[17179570.040000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179570.040000] Intel machine check architecture supported.
[17179570.040000] Intel machine check reporting enabled on CPU#2.
[17179570.040000] CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
[17179570.040000] CPU2: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
[17179570.040000] Booting processor 3/7 eip 2000
[17179570.040000] CPU 3 irqstacks, hard=c0366000 soft=c035e000
[17179570.048000] Initializing CPU#3
[17179570.132000] Calibrating delay using timer specific routine.. 3987.45 BogoMIPS (lpj=7974912)
[17179570.132000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.132000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179570.132000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179570.132000] CPU: L2 cache: 512K
[17179570.132000] CPU: Physical Processor ID: 3
[17179570.132000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179570.132000] Intel machine check architecture supported.
[17179570.132000] Intel machine check reporting enabled on CPU#3.
[17179570.132000] CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
[17179570.132000] CPU3: Intel(R) XEON(TM) CPU 2.00GHz stepping 04
[17179570.132000] Total of 4 processors activated (15954.49 BogoMIPS).
[17179570.132000] ENABLING IO-APIC IRQs
[17179570.132000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.276000] checking TSC synchronization across 4 CPUs: passed.
[17179570.288000] Brought up 4 CPUs
[17179570.288000] NET: Registered protocol family 16
[17179570.288000] ACPI: bus type pci registered
[17179570.288000] PCI: PCI BIOS revision 2.10 entry at 0xfd921, last bus=4
[17179570.288000] PCI: Using configuration type 1
[17179570.288000] ACPI: Subsystem revision 20050902
[17179570.296000] ACPI: Interpreter enabled
[17179570.296000] ACPI: Using IOAPIC for interrupt routing
[17179570.296000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.296000] PCI: Probing PCI hardware (bus 00)
[17179570.296000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[17179570.300000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[17179570.300000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.300000] Boot video device is 0000:04:03.0
[17179570.300000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.300000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.304000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 14 15)
[17179570.304000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.304000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.304000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
[17179570.304000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.312000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.312000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.312000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 14 15)
[17179570.316000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT]
[17179570.316000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.Z000._PRT]
[17179570.316000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.Z001._PRT]
[17179570.316000] SCSI subsystem initialized
[17179570.316000] PCI: Using ACPI for IRQ routing
[17179570.316000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179570.328000] PCI: Bridge: 0000:01:1d.0
[17179570.328000] IO window: 8000-8fff
[17179570.328000] MEM window: fc200000-fc2fffff
[17179570.328000] PREFETCH window: 88000000-880fffff
[17179570.328000] PCI: Bridge: 0000:01:1f.0
[17179570.328000] IO window: disabled.
[17179570.328000] MEM window: disabled.
[17179570.328000] PREFETCH window: disabled.
[17179570.328000] PCI: Bridge: 0000:00:02.0
[17179570.328000] IO window: 8000-8fff
[17179570.328000] MEM window: fc100000-fc2fffff
[17179570.328000] PREFETCH window: 88000000-880fffff
[17179570.328000] PCI: Bridge: 0000:00:1e.0
[17179570.328000] IO window: 9000-9fff
[17179570.328000] MEM window: fc300000-fdffffff
[17179570.332000] PREFETCH window: 88100000-881fffff
[17179570.332000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.332000] Simple Boot Flag at 0x35 set to 0x1
[17179570.332000] highmem bounce pool size: 64 pages
[17179570.332000] Initializing Cryptographic API
[17179570.332000] io scheduler noop registered
[17179570.332000] io scheduler deadline registered
[17179570.332000] ACPI: Power Button (FF) [PWRF]
[17179570.332000] ACPI: Power Button (CM) [PWRB]
[17179570.336000] Real Time Clock Driver v1.12
[17179570.336000] Non-volatile memory driver v1.2
[17179570.336000] hw_random hardware driver 1.0.0 loaded
[17179570.336000] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[17179570.336000] Hangcheck: Using monotonic_clock().
[17179570.340000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.340000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.340000] Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
[17179570.340000] Copyright (c) 1999-2005 Intel Corporation.
[17179570.340000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 16
[17179570.636000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[17179570.636000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.636000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.636000] PDC20267: IDE controller at PCI slot 0000:04:06.0
[17179570.636000] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[17179570.636000] PDC20267: chipset revision 2
[17179570.636000] PDC20267: ROM enabled at 0x88140000
[17179570.636000] PDC20267: 100%% native mode on irq 17
[17179570.636000] PDC20267: neither IDE port enabled (BIOS)
[17179570.636000] Probing IDE interface ide0...
[17179571.216000] Probing IDE interface ide1...
[17179572.104000] hdc: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
[17179572.776000] ide1 at 0x170-0x177,0x376 on irq 15
[17179572.780000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 18
[17179572.988000] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[17179572.988000] <Adaptec 19160B Ultra160 SCSI adapter>
[17179572.988000] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[17179572.988000]
[17179588.248000] Vendor: QUANTUM Model: ATLAS10K3_18_WLS Rev: 020W
[17179588.248000] Type: Direct-Access ANSI SCSI revision: 03
[17179588.248000] scsi0:A:1:0: Tagged Queuing enabled. Depth 32
[17179588.248000] target0:0:1: Beginning Domain Validation
[17179588.248000] target0:0:1: wide asynchronous.
[17179588.252000] target0:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
[17179588.256000] target0:0:1: Ending Domain Validation
[17179588.256000] Vendor: QUANTUM Model: ATLAS10K3_18_WLS Rev: 020W
[17179588.260000] Type: Direct-Access ANSI SCSI revision: 03
[17179588.260000] scsi0:A:2:0: Tagged Queuing enabled. Depth 32
[17179588.260000] target0:0:2: Beginning Domain Validation
[17179588.260000] target0:0:2: wide asynchronous.
[17179588.260000] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
[17179588.264000] target0:0:2: Domain Validation skipping write tests
[17179588.264000] target0:0:2: Ending Domain Validation
[17179591.340000] SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
[17179591.340000] SCSI device sda: drive cache: write through
[17179591.340000] SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
[17179591.344000] SCSI device sda: drive cache: write through
[17179591.344000] sda: sda1 sda2 < sda5 >
[17179591.352000] sd 0:0:1:0: Attached scsi disk sda
[17179591.352000] SCSI device sdb: 35916548 512-byte hdwr sectors (18389 MB)
[17179591.352000] SCSI device sdb: drive cache: write back
[17179591.352000] SCSI device sdb: 35916548 512-byte hdwr sectors (18389 MB)
[17179591.356000] SCSI device sdb: drive cache: write back
[17179591.356000] sdb: sdb1
[17179591.356000] sd 0:0:2:0: Attached scsi disk sdb
[17179591.356000] sd 0:0:1:0: Attached scsi generic sg0 type 0
[17179591.356000] sd 0:0:2:0: Attached scsi generic sg1 type 0
[17179591.356000] mice: PS/2 mouse device common for all mice
[17179591.356000] NET: Registered protocol family 2
[17179591.388000] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179591.392000] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[17179591.396000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179591.396000] TCP: Hash tables configured (established 524288 bind 65536)
[17179591.396000] TCP reno registered
[17179591.396000] TCP bic registered
[17179591.396000] NET: Registered protocol family 1
[17179591.396000] NET: Registered protocol family 17
[17179591.396000] NET: Registered protocol family 15
[17179591.396000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
[17179591.396000] All bugs added by David S. Miller <davem@xxxxxxxxxx>
[17179591.396000] Starting balanced_irq
[17179591.400000] Using IPI Shortcut mode
[17179591.400000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[17179591.416000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179591.820000] ReiserFS: sda1: using ordered data mode
[17179591.824000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179591.828000] ReiserFS: sda1: checking transaction log (sda1)
[17179591.856000] ReiserFS: sda1: Using r5 hash to sort names
[17179591.856000] VFS: Mounted root (reiserfs filesystem) readonly.
[17179591.856000] Freeing unused kernel memory: 208k freed
[17179592.976000] Adding 763048k swap on /dev/sda5. Priority:-1 extents:1 across:763048k
[17179596.712000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179596.712000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179596.716000] Probing IDE interface ide0...
[17179598.592000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[17179598.592000] e100: Copyright(c) 1999-2005 Intel Corporation
[17179598.592000] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 20 (level, low) -> IRQ 19
[17179598.616000] e100: eth1: e100_probe: addr 0xfc362000, irq 19, MAC addr 00:02:B3:AF:6B:2F
[17179598.616000] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 23 (level, low) -> IRQ 20
[17179598.640000] e100: eth2: e100_probe: addr 0xfc363000, irq 20, MAC addr 00:02:B3:AF:68:39
[17179598.940000] kobject_register failed for Promise_Old_IDE (-17)
[17179598.940000] [dump_stack+21/23] dump_stack+0x15/0x17
[17179598.940000] [kobject_register+52/64] kobject_register+0x34/0x40
[17179598.940000] [bus_add_driver+69/163] bus_add_driver+0x45/0xa3
[17179598.940000] [driver_register+57/60] driver_register+0x39/0x3c
[17179598.940000] [__pci_register_driver+125/132] __pci_register_driver+0x7d/0x84
[17179598.940000] [__ide_pci_register_driver+19/53] __ide_pci_register_driver+0x13/0x35
[17179598.940000] [pg0+945449588/1069855744] pdc202xx_ide_init+0x12/0x16 [pdc202xx_old]
[17179598.940000] [sys_init_module+193/430] sys_init_module+0xc1/0x1ae
[17179598.940000] [syscall_call+7/11] syscall_call+0x7/0xb
[17179599.544000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex

Attachment: signature.asc
Description: =?iso-8859-5?Q?=C2=DE=D2=D0?= =?iso-8859-5?Q?_=D5?==?iso-8859-5?Q?_=E6=D8=E4=E0=DE=D2=DE?==?iso-8859-5?Q?_=DF=DE=D4=DF=D8=E1=D0=DD=D0?==?iso-8859-5?Q?_=E7=D0=E1=E2?= =?iso-8859-5?Q?_=DE=E2?==?iso-8859-5?Q?_=DF=D8=E1=DC=DE=E2=DE?=