Re: bad pmd filemap.c, oops; 2.4.30 and 2.4.32

[Marcelo Tosatti]

Hi Chris,

On Tue, Dec 27, 2005 at 08:58:39AM -0800, Chris Stromsoe wrote:
> I have a machine that oopsed twice in the last 3 weeks.  Immediately 
> before each oops was a "filemap.c:2234: bad pmd" message.  The first oops 
> happened with 2.4.30, the second with 2.4.32.  The oops from 2.4.30 is 
> below.  I don't have the oops from 2.4.32.
> 
> The machine is a usenet feeder and does a constant ~110mbit/s traffic.  I 
> have the tg3 and bonding modules loaded.  There are 2 Adaptec controllers, 
> one onboard, one pci (aic7899 and 3960D).  There are 5 disks off the first 
> channel of aic7899 (comes up as scsi2), 4 of which are in a RAID5.  The 
> other 3 channels are unused.  I have the .config for 2.4.30 available if 
> needed.
> 
> Pointers for where to look if/when it happens again would be appreciated. 
>
> Thanks.
> 
> 
> -Chris
> 
> filemap.c:2234: bad pmd 00c001e3.
> filemap.c:2234: bad pmd 010001e3.

This is usually due to memory corruption. Please verify it with
memtest86.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/