Re: [PATCH linux-2.6-block:master 07/10] blk: add FUA support to libata

[Tejun Heo]

07_blk_libata-add-fua-support.patch

	Add FUA support to libata.

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>

 drivers/scsi/libata-core.c |   14 +++++++++-----
 drivers/scsi/libata-scsi.c |   36 +++++++++++++++++++++++++++++++++---
 include/linux/ata.h        |    4 +++-
 include/linux/libata.h     |    1 +
 4 files changed, 46 insertions(+), 9 deletions(-)

Index: blk-fixes/drivers/scsi/libata-core.c
===================================================================
--- blk-fixes.orig/drivers/scsi/libata-core.c	2005-10-19 21:46:49.000000000 +0900
+++ blk-fixes/drivers/scsi/libata-core.c	2005-10-19 21:47:14.000000000 +0900
@@ -616,19 +616,21 @@ void ata_tf_from_fis(u8 *fis, struct ata
 }
 
 /**
- *	ata_prot_to_cmd - determine which read/write opcodes to use
+ *	ata_prot_to_cmd - determine which read/write/fua-write opcodes to use
  *	@protocol: ATA_PROT_xxx taskfile protocol
  *	@lba48: true is lba48 is present
  *
- *	Given necessary input, determine which read/write commands
- *	to use to transfer data.
+ *	Given necessary input, determine which read/write/fua-write
+ *	commands to use to transfer data.  Note that we only support
+ *	fua-writes on DMA LBA48 protocol.  In other cases, we simply
+ *	return 0 which is NOP.
  *
  *	LOCKING:
  *	None.
  */
 static int ata_prot_to_cmd(int protocol, int lba48)
 {
-	int rcmd = 0, wcmd = 0;
+	int rcmd = 0, wcmd = 0, wfua = 0;
 
 	switch (protocol) {
 	case ATA_PROT_PIO:
@@ -645,6 +647,7 @@ static int ata_prot_to_cmd(int protocol,
 		if (lba48) {
 			rcmd = ATA_CMD_READ_EXT;
 			wcmd = ATA_CMD_WRITE_EXT;
+			wfua = ATA_CMD_WRITE_FUA_EXT;
 		} else {
 			rcmd = ATA_CMD_READ;
 			wcmd = ATA_CMD_WRITE;
@@ -655,7 +658,7 @@ static int ata_prot_to_cmd(int protocol,
 		return -1;
 	}
 
-	return rcmd | (wcmd << 8);
+	return rcmd | (wcmd << 8) | (wfua << 16);
 }
 
 /**
@@ -688,6 +691,7 @@ static void ata_dev_set_protocol(struct 
 
 	dev->read_cmd = cmd & 0xff;
 	dev->write_cmd = (cmd >> 8) & 0xff;
+	dev->write_fua_cmd = (cmd >> 16) & 0xff;
 }
 
 static const char * xfer_mode_str[] = {
Index: blk-fixes/drivers/scsi/libata-scsi.c
===================================================================
--- blk-fixes.orig/drivers/scsi/libata-scsi.c	2005-10-19 21:46:49.000000000 +0900
+++ blk-fixes/drivers/scsi/libata-scsi.c	2005-10-19 21:47:14.000000000 +0900
@@ -608,12 +608,40 @@ static unsigned int ata_scsi_rw_xlat(str
 	tf->protocol = qc->dev->xfer_protocol;
 	tf->device |= ATA_LBA;
 
-	if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
-	    scsicmd[0] == READ_16) {
+	switch (scsicmd[0]) {
+	case READ_10:
+	case READ_16:
+		if (unlikely(scsicmd[1] & (1 << 3))) {
+			printk(KERN_WARNING
+			       "ata%u(%u): WARNING: FUA READ unsupported\n",
+			       qc->ap->id, qc->dev->devno);
+			return 1;
+		}
+		/* fall through */
+	case READ_6:
 		tf->command = qc->dev->read_cmd;
-	} else {
+		break;
+
+	case WRITE_10:
+	case WRITE_16:
+		if (unlikely(scsicmd[1] & (1 << 3))) {
+			if (qc->dev->write_fua_cmd == 0 || !lba48) {
+				printk(KERN_WARNING
+				       "ata%u(%u): WARNING: FUA WRITE "
+				       "unsupported with the current "
+				       "protocol/addressing\n",
+				       qc->ap->id, qc->dev->devno);
+				return 1;
+			}
+			tf->command = qc->dev->write_fua_cmd;
+			tf->flags |= ATA_TFLAG_WRITE;
+			break;
+		}
+		/* fall through */
+	case WRITE_6:
 		tf->command = qc->dev->write_cmd;
 		tf->flags |= ATA_TFLAG_WRITE;
+		break;
 	}
 
 	if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
@@ -1217,10 +1245,12 @@ unsigned int ata_scsiop_mode_sense(struc
 	if (six_byte) {
 		output_len--;
 		rbuf[0] = output_len;
+		rbuf[2] |= ata_id_has_fua(args->id) ? 1 << 4 : 0;
 	} else {
 		output_len -= 2;
 		rbuf[0] = output_len >> 8;
 		rbuf[1] = output_len;
+		rbuf[3] |= ata_id_has_fua(args->id) ? 1 << 4 : 0;
 	}
 
 	return 0;
Index: blk-fixes/include/linux/ata.h
===================================================================
--- blk-fixes.orig/include/linux/ata.h	2005-10-19 21:46:49.000000000 +0900
+++ blk-fixes/include/linux/ata.h	2005-10-19 21:47:14.000000000 +0900
@@ -124,6 +124,7 @@ enum {
 	ATA_CMD_READ_EXT	= 0x25,
 	ATA_CMD_WRITE		= 0xCA,
 	ATA_CMD_WRITE_EXT	= 0x35,
+	ATA_CMD_WRITE_FUA_EXT	= 0x3D,
 	ATA_CMD_PIO_READ	= 0x20,
 	ATA_CMD_PIO_READ_EXT	= 0x24,
 	ATA_CMD_PIO_WRITE	= 0x30,
@@ -234,7 +235,8 @@ struct ata_taskfile {
 #define ata_id_is_sata(id)	((id)[93] == 0)
 #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
 #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
-#define ata_id_has_flush(id) ((id)[83] & (1 << 12))
+#define ata_id_has_fua(id)	((id)[84] & (1 << 6))
+#define ata_id_has_flush(id)	((id)[83] & (1 << 12))
 #define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13))
 #define ata_id_has_lba48(id)	((id)[83] & (1 << 10))
 #define ata_id_has_wcache(id)	((id)[82] & (1 << 5))
Index: blk-fixes/include/linux/libata.h
===================================================================
--- blk-fixes.orig/include/linux/libata.h	2005-10-19 21:46:49.000000000 +0900
+++ blk-fixes/include/linux/libata.h	2005-10-19 21:47:14.000000000 +0900
@@ -282,6 +282,7 @@ struct ata_device {
 	u8			xfer_protocol;	/* taskfile xfer protocol */
 	u8			read_cmd;	/* opcode to use on read */
 	u8			write_cmd;	/* opcode to use on write */
+	u8			write_fua_cmd;	/* opcode to use on FUA write */
 };
 
 struct ata_port {

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/