[patch 2.6.14-rc3 2/3] sundance: probe PHYs from MII address 0

[John W. Linville]

Probe for PHYs starting at MII address 0 instead of MII address 1.
This covers the entire range of MII addresses.

Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
---

 drivers/net/sundance.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -608,7 +608,7 @@ static int __devinit sundance_probe1 (st
 
 	np->phys[0] = 1;		/* Default setting */
 	np->mii_preamble_required++;
-	for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+	for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
 		int mii_status = mdio_read(dev, phy, MII_BMSR);
 		if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 			np->phys[phy_idx++] = phy;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/