Serial driver (serial_core.c) status messages should be set to KERN_INFO
From: Alon Bar-Lev
Date: Thu Sep 01 2005 - 15:26:07 EST
Hello,
When upgrading to 2.6.13 I've noticed that serial driver reports it
status with unknown severity, causing the boot-splash to be overridden.
Please consider this modification.
Best Regards,
Alon Bar-Lev.
At drivers/serial/serial_core.c
static inline void
uart_report_port(struct uart_driver *drv, struct uart_port *port)
{
- printk("%s%d", drv->dev_name, port->line);
+ printk(KERN_INFO + "%s%d", drv->dev_name, port->line);
printk(" at ");
switch (port->iotype) {
case UPIO_PORT:
printk("I/O 0x%x", port->iobase);
break;
case UPIO_HUB6:
printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6);
break;
case UPIO_MEM:
case UPIO_MEM32:
printk("MMIO 0x%lx", port->mapbase);
break;
}
printk(" (irq = %d) is a %s\n", port->irq, uart_type(port));
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/