[RFC][PATCH - 8/13] NTP cleanup: Integrate second_overflow() logic

[john stultz]

All
	This patch removes the second_overflow() logic integrating it into the
ntp_advance() function. This provides a single interface to advance the
internal NTP state machine.

Any comments or feedback would be greatly appreciated.

thanks
-john


linux-2.6.13-rc6_timeofday-ntp-part8_B5.patch
============================================
diff --git a/include/linux/ntp.h b/include/linux/ntp.h
--- a/include/linux/ntp.h
+++ b/include/linux/ntp.h
@@ -15,9 +15,8 @@
 		(__x < 0) ? (-((-__x) >> (__s))) : ((__x) >> (__s));})
 
 /* NTP state machine interfaces */
-void ntp_advance(void);
+void ntp_advance(unsigned long interval_nsec);
 int ntp_adjtimex(struct timex*);
-void second_overflow(void);
 int ntp_leapsecond(struct timespec now);
 void ntp_clear(void);
 int ntp_synced(void);
diff --git a/kernel/ntp.c b/kernel/ntp.c
--- a/kernel/ntp.c
+++ b/kernel/ntp.c
@@ -30,6 +30,11 @@
 *  http://www.eecis.udel.edu/~mills/database/rfc/rfc1589.txt
 *  http://www.eecis.udel.edu/~mills/database/reports/kern/kernb.pdf
 *
+* The tricky bits of code to handle the accurate clock support
+* were provided by Dave Mills (Mills@xxxxxxxx) of NTP fame.
+* They were originally developed for SUN and DEC kernels.
+* All the kudos should go to Dave for this stuff.
+*
 * NOTE:	To simplify the code, we do not implement any of
 * the PPS code, as the code that uses it never was merged.
 *                             -johnstul@xxxxxxxxxx
@@ -67,10 +72,69 @@ static long fixed_tick_ns_adj;
 
 #define SEC_PER_DAY 86400
 
-void ntp_advance(void)
+void ntp_advance(unsigned long interval_nsec)
 {
+	static unsigned long interval_sum = 0;
 	long time_adjust_step;
 
+
+	/* Some components of the NTP state machine are advanced
+	 * in full second increments (this is a hold-over from
+	 * the old second_overflow() code)
+	 *
+	 * XXX - I'd prefer to smoothly apply this math at each
+	 * call to ntp_advance() rather then each second.
+	 */
+	interval_sum += interval_nsec;
+	while (interval_sum > NSEC_PER_SEC) {
+		long next_adj;
+		interval_sum -= NSEC_PER_SEC;
+
+		/* Bump the maxerror field */
+		time_maxerror += time_tolerance >> SHIFT_USEC;
+		if ( time_maxerror > NTP_PHASE_LIMIT ) {
+			time_maxerror = NTP_PHASE_LIMIT;
+			time_status |= STA_UNSYNC;
+		}
+
+		/*
+		 * Compute the phase adjustment for the next second. In
+		 * PLL mode, the offset is reduced by a fixed factor
+		 * times the time constant. In FLL mode the offset is
+		 * used directly. In either mode, the maximum phase
+		 * adjustment for each second is clamped so as to spread
+		 * the adjustment over not more than the number of
+		 * seconds between updates.
+		 */
+		next_adj = time_offset;
+		if (!(time_status & STA_FLL))
+			next_adj = shiftR(next_adj, SHIFT_KG + time_constant);
+		next_adj = min(next_adj, (MAXPHASE / MINSEC) << SHIFT_UPDATE);
+		next_adj = max(next_adj, -(MAXPHASE / MINSEC) << SHIFT_UPDATE);
+		time_offset -= next_adj;
+
+		time_adj = next_adj << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
+
+		time_adj += shiftR(time_freq, (SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
+
+#if HZ == 100
+    	/* Compensate for (HZ==100) != (1 << SHIFT_HZ).
+	     * Add 25% and 3.125% to get 128.125;
+		 * => only 0.125% error (p. 14)
+    	 */
+		time_adj += shiftR(time_adj,2) + shiftR(time_adj,5);
+#endif
+#if HZ == 1000
+	    /* Compensate for (HZ==1000) != (1 << SHIFT_HZ).
+    	 * Add 1.5625% and 0.78125% to get 1023.4375;
+		 * => only 0.05% error (p. 14)
+	     */
+		time_adj += shiftR(time_adj,6) + shiftR(time_adj,7);
+#endif
+
+	}
+
+
 	if ( (time_adjust_step = time_adjust) != 0 ) {
 	    /* We are doing an adjtime thing.
 	     *
@@ -113,71 +177,6 @@ void ntp_advance(void)
 	}
 }
 
-
-/*
- * this routine handles the overflow of the microsecond field
- *
- * The tricky bits of code to handle the accurate clock support
- * were provided by Dave Mills (Mills@xxxxxxxx) of NTP fame.
- * They were originally developed for SUN and DEC kernels.
- * All the kudos should go to Dave for this stuff.
- *
- */
-void second_overflow(void)
-{
-	long ltemp;
-
-	/* Bump the maxerror field */
-	time_maxerror += time_tolerance >> SHIFT_USEC;
-	if ( time_maxerror > NTP_PHASE_LIMIT ) {
-		time_maxerror = NTP_PHASE_LIMIT;
-		time_status |= STA_UNSYNC;
-	}
-
-	/*
-	 * Compute the phase adjustment for the next second. In
-	 * PLL mode, the offset is reduced by a fixed factor
-	 * times the time constant. In FLL mode the offset is
-	 * used directly. In either mode, the maximum phase
-	 * adjustment for each second is clamped so as to spread
-	 * the adjustment over not more than the number of
-	 * seconds between updates.
-	 */
-	if (time_offset < 0) {
-		ltemp = -time_offset;
-		if (!(time_status & STA_FLL))
-			ltemp >>= SHIFT_KG + time_constant;
-		if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE)
-			ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE;
-		time_offset += ltemp;
-		time_adj = -ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
-	} else {
-		ltemp = time_offset;
-		if (!(time_status & STA_FLL))
-			ltemp >>= SHIFT_KG + time_constant;
-		if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE)
-			ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE;
-		time_offset -= ltemp;
-		time_adj = ltemp << (SHIFT_SCALE - SHIFT_HZ - SHIFT_UPDATE);
-	}
-
-	ltemp = time_freq;
-	time_adj += shiftR(ltemp, (SHIFT_USEC + SHIFT_HZ - SHIFT_SCALE));
-
-#if HZ == 100
-    /* Compensate for (HZ==100) != (1 << SHIFT_HZ).
-     * Add 25% and 3.125% to get 128.125; => only 0.125% error (p. 14)
-     */
-	time_adj += shiftR(time_adj,2) + shiftR(time_adj,5);
-#endif
-#if HZ == 1000
-    /* Compensate for (HZ==1000) != (1 << SHIFT_HZ).
-     * Add 1.5625% and 0.78125% to get 1023.4375; => only 0.05% error (p. 14)
-     */
-	time_adj += shiftR(time_adj,6) + shiftR(time_adj,7);
-#endif
-}
-
 /**
  * ntp_hardupdate - Calculates the offset and freq values
  * offset: current offset
diff --git a/kernel/timer.c b/kernel/timer.c
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -604,7 +604,7 @@ static void update_wall_time_one_tick(vo
 {
 	long delta_nsec;
 
-	ntp_advance();
+	ntp_advance(tick_nsec);
 
 	delta_nsec = tick_nsec + ntp_get_fixed_ns_adjustment();
 
@@ -629,7 +629,6 @@ static void update_wall_time(unsigned lo
 			int leapsecond;
 			xtime.tv_nsec -= 1000000000;
 			xtime.tv_sec++;
-			second_overflow();
 
 			/* apply leapsecond if appropriate */
 			leapsecond = ntp_leapsecond(xtime);


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/