[patch 4/8] Corgi Touchscreen: Allow the driver to share the PMU

From: Richard Purdie
Date: Fri Jul 29 2005 - 05:18:51 EST


The Corgi Touchscreen driver uses the PMU as an accurate timing source
which conflicts with its usage for performance monitoring. This patch
allows it to be shared with other users such as oprofile.

Signed-off-by: Richard Purdie <rpurdie@xxxxxxxxx>

Index: linux-2.6.12/drivers/input/touchscreen/corgi_ts.c
===================================================================
--- linux-2.6.12.orig/drivers/input/touchscreen/corgi_ts.c 2005-07-28 15:21:39.000000000 +0100
+++ linux-2.6.12/drivers/input/touchscreen/corgi_ts.c 2005-07-28 16:20:38.000000000 +0100
@@ -53,8 +53,8 @@

#define SyncHS() while((STATUS_HSYNC) == 0); while((STATUS_HSYNC) != 0);
#define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a))
-#define CCNT_ON() {int pmnc = 1; asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(pmnc));}
-#define CCNT_OFF() {int pmnc = 0; asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(pmnc));}
+#define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x))
+#define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x))

#define WAIT_HS_400_VGA 7013U // 17.615us
#define WAIT_HS_400_QVGA 16622U // 41.750us
@@ -96,14 +96,17 @@

static int sync_receive_data_send_cmd(int doRecive, int doSend, unsigned int address, unsigned long wait_time)
{
+ unsigned long timer1 = 0, timer2, pmnc = 0;
int pos = 0;
- unsigned long timer1 = 0, timer2;
int dosleep;

dosleep = !w100fb_get_blanking();

if (dosleep && doSend) {
- CCNT_ON();
+ PMNC_GET(pmnc);
+ if (!(pmnc & 0x01))
+ PMNC_SET(pmnc | 0x01);
+
/* polling HSync */
SyncHS();
/* get CCNT */
@@ -134,8 +137,8 @@
CCNT(timer2);
}
corgi_ssp_ads7846_put(cmd);
- if (dosleep)
- CCNT_OFF();
+ if (dosleep && !(pmnc & 0x01))
+ PMNC_SET(pmnc);
}
return pos;
}


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/