Re: often ide errors on amd64 / A8N-SLI

[Alan Cox]

On Iau, 2005-07-21 at 19:26 +0200, jurriaan wrote:
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }


There was corruption on the cable between the controller and drive. That
usually indicates a cable or noise problem in the PC but could indicate
mistuning of the interface. Make sure the IDE cable is 


 [controller]<---- long section ----->[slave]--short section-->[master]


as one common cause is having the cable the other way around.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/