[PATCH] [2/5+1] menu -> menuconfig part 1

From: Bodo Eggert
Date: Sun Jul 17 2005 - 06:32:48 EST

Next message: Bodo Eggert: "[PATCH] [3/5+1] menu -> menuconfig part 1"
Previous message: Bodo Eggert: "Re: [PATCH] [1/5+1] menu -> menuconfig part 1"
In reply to: randy_dunlap: "Re: [PATCH] [1/5+1] menu -> menuconfig part 1"
Next in thread: randy_dunlap: "Re: [PATCH] [2/5+1] menu -> menuconfig part 1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, 17 Jul 2005, Bodo Eggert wrote:

> These patches change some menus into menuconfig options.
>
> Reworked to apply to linux-2.6.13-rc3-git3

The USB menu.

drivers/usb/Kconfig | 18 ++++++++++--------
drivers/usb/atm/Kconfig | 7 +------
drivers/usb/class/Kconfig | 11 ++++-------
drivers/usb/core/Kconfig | 11 ++++-------
drivers/usb/gadget/Kconfig | 8 ++------
drivers/usb/host/Kconfig | 8 +++-----
drivers/usb/image/Kconfig | 5 ++---
drivers/usb/input/Kconfig | 2 --
drivers/usb/media/Kconfig | 24 +++++++++++-------------
drivers/usb/misc/Kconfig | 17 ++++-------------
drivers/usb/net/Kconfig | 11 +++++++----
drivers/usb/serial/Kconfig | 1 -
drivers/usb/storage/Kconfig | 2 --
13 files changed, 48 insertions(+), 77 deletions(-)

Signed-Off-By: Bodo Eggert <7eggert@xxxxxx>

diff -rNup a/drivers/usb/Kconfig b/drivers/usb/Kconfig
--- a/drivers/usb/Kconfig 2005-07-17 08:09:02.000000000 +0200
+++ b/drivers/usb/Kconfig 2005-07-17 10:47:59.000000000 +0200
@@ -2,8 +2,6 @@
# USB device configuration
#

-menu "USB support"
-
# Host-side USB depends on having a host controller
# NOTE: dummy_hcd is always an option, but it's ignored here ...
# NOTE: SL-811 option should be board-specific ...
@@ -29,9 +27,12 @@ config USB_ARCH_HAS_OHCI
# more:
default PCI

+comment "USB (host side) may require PCI"
+ depends on !USB_ARCH_HAS_HCD && !PCI
+
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
-config USB
- tristate "Support for Host-side USB"
+menuconfig USB
+ tristate "USB (host side)"
depends on USB_ARCH_HAS_HCD
---help---
Universal Serial Bus (USB) is a specification for a serial bus
@@ -65,6 +66,8 @@ config USB
To compile this driver as a module, choose M here: the
module will be called usbcore.

+if USB
+
source "drivers/usb/core/Kconfig"

source "drivers/usb/host/Kconfig"
@@ -84,11 +87,10 @@ source "drivers/usb/net/Kconfig"
source "drivers/usb/mon/Kconfig"

comment "USB port drivers"
- depends on USB

config USB_USS720
tristate "USS720 parport driver"
- depends on USB && PARPORT
+ depends on PARPORT
select PARPORT_NOT_PC
---help---
This driver is for USB parallel port adapters that use the Lucent
@@ -121,7 +123,7 @@ source "drivers/usb/misc/Kconfig"

source "drivers/usb/atm/Kconfig"

-source "drivers/usb/gadget/Kconfig"
+endif

-endmenu
+source "drivers/usb/gadget/Kconfig"

diff -rNup a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
--- a/drivers/usb/atm/Kconfig 2005-07-17 08:10:01.000000000 +0200
+++ b/drivers/usb/atm/Kconfig 2005-07-17 11:11:22.000000000 +0200
@@ -2,10 +2,7 @@
# USB/ATM DSL configuration
#

-menu "USB DSL modem support"
- depends on USB
-
-config USB_ATM
+menuconfig USB_ATM
tristate "USB DSL modem support"
depends on USB && ATM
select CRC32
@@ -56,5 +53,3 @@ config USB_XUSBATM

To compile this driver as a module, choose M here: the
module will be called xusbatm.
-
-endmenu
diff -rNup a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
--- a/drivers/usb/class/Kconfig 2005-07-17 08:06:24.000000000 +0200
+++ b/drivers/usb/class/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -2,11 +2,10 @@
# USB Class driver configuration
#
comment "USB Device Class drivers"
- depends on USB

config USB_AUDIO
tristate "USB Audio support"
- depends on USB && SOUND
+ depends on SOUND
help
Say Y here if you want to connect USB audio equipment such as
speakers to your computer's USB port. You only need this if you use
@@ -16,11 +15,11 @@ config USB_AUDIO
module will be called audio.

comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem"
- depends on USB && BT
+ depends on BT

config USB_BLUETOOTH_TTY
tristate "USB Bluetooth TTY support"
- depends on USB && BT=n
+ depends on BT=n
---help---
This driver implements a nonstandard tty interface to a Bluetooth
device that can be used only by specialized Bluetooth HCI software.
@@ -40,7 +39,7 @@ config USB_BLUETOOTH_TTY

config USB_MIDI
tristate "USB MIDI support"
- depends on USB && SOUND
+ depends on SOUND
---help---
Say Y here if you want to connect a USB MIDI device to your
computer's USB port. This driver is for devices that comply with
@@ -61,7 +60,6 @@ config USB_MIDI

config USB_ACM
tristate "USB Modem (CDC ACM) support"
- depends on USB
---help---
This driver supports USB modems and ISDN adapters which support the
Communication Device Class Abstract Control Model interface.
@@ -76,7 +74,6 @@ config USB_ACM

config USB_PRINTER
tristate "USB Printer support"
- depends on USB
help
Say Y here if you want to connect a USB printer to your computer's
USB port.
diff -rNup a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
--- a/drivers/usb/core/Kconfig 2005-07-17 08:04:48.000000000 +0200
+++ b/drivers/usb/core/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -3,18 +3,15 @@
#
config USB_DEBUG
bool "USB verbose debug messages"
- depends on USB
help
Say Y here if you want the USB core & hub drivers to produce a bunch
of debug messages to the system log. Select this if you are having a
problem with USB support and want to see more of what is going on.

comment "Miscellaneous USB options"
- depends on USB

config USB_DEVICEFS
bool "USB device filesystem"
- depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
systems" section, above), you will get a file /proc/bus/usb/devices
@@ -38,7 +35,7 @@ config USB_DEVICEFS

config USB_BANDWIDTH
bool "Enforce USB bandwidth allocation (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say Y here, the USB subsystem enforces USB bandwidth
allocation and will prevent some device opens from succeeding
@@ -51,7 +48,7 @@ config USB_BANDWIDTH

config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say Y here, the USB subsystem will use dynamic minor
allocation for any device that uses the USB major number.
@@ -62,7 +59,7 @@ config USB_DYNAMIC_MINORS

config USB_SUSPEND
bool "USB suspend/resume (EXPERIMENTAL)"
- depends on USB && PM && EXPERIMENTAL
+ depends on PM && EXPERIMENTAL
help
If you say Y here, you can use driver calls or the sysfs
"power/state" file to suspend or resume individual USB
@@ -75,7 +72,7 @@ config USB_SUSPEND

config USB_OTG
bool
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
select USB_SUSPEND
default n

diff -rNup a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
--- a/drivers/usb/gadget/Kconfig 2005-07-17 08:10:01.000000000 +0200
+++ b/drivers/usb/gadget/Kconfig 2005-07-17 10:47:59.000000000 +0200
@@ -12,10 +12,8 @@
# With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
#
-menu "USB Gadget Support"
-
-config USB_GADGET
- tristate "Support for USB Gadgets"
+menuconfig USB_GADGET
+ tristate "USB Gadgets (device side)"
help
USB is a master/slave protocol, organized with one master
host (such as a PC) controlling up to 127 peripheral devices.
@@ -394,5 +392,3 @@ config USB_G_SERIAL
# - none yet

endchoice
-
-endmenu
diff -rNup a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
--- a/drivers/usb/host/Kconfig 2005-07-17 08:10:02.000000000 +0200
+++ b/drivers/usb/host/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -2,11 +2,10 @@
# USB Host Controller Drivers
#
comment "USB Host Controller Drivers"
- depends on USB

config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
- depends on USB && PCI
+ depends on PCI
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -64,7 +63,7 @@ config USB_ISP116X_HCD

config USB_OHCI_HCD
tristate "OHCI HCD support"
- depends on USB && USB_ARCH_HAS_OHCI
+ depends on USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing
@@ -110,7 +109,7 @@ config USB_OHCI_LITTLE_ENDIAN

config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB && PCI
+ depends on PCI
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@@ -126,7 +125,6 @@ config USB_UHCI_HCD

config USB_SL811_HCD
tristate "SL811HS HCD support"
- depends on USB
default N
help
The SL811HS is a single-port USB controller that supports either
diff -rNup a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig
--- a/drivers/usb/image/Kconfig 2005-07-17 08:09:04.000000000 +0200
+++ b/drivers/usb/image/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -2,11 +2,10 @@
# USB Imageing devices configuration
#
comment "USB Imaging devices"
- depends on USB

config USB_MDC800
tristate "USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
Say Y here if you want to connect this type of still camera to
your computer's USB port. This driver can be used with gphoto 0.4.3
@@ -19,7 +18,7 @@ config USB_MDC800

config USB_MICROTEK
tristate "Microtek X6USB scanner support"
- depends on USB && SCSI
+ depends on SCSI
help
Say Y here if you want support for the Microtek X6USB and
possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
diff -rNup a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
--- a/drivers/usb/input/Kconfig 2005-07-17 08:10:02.000000000 +0200
+++ b/drivers/usb/input/Kconfig 2005-07-17 10:47:59.000000000 +0200
@@ -2,11 +2,9 @@
# USB Input driver configuration
#
comment "USB Input Devices"
- depends on USB

config USB_HID
tristate "USB Human Interface Device (full HID) support"
- depends on USB
---help---
Say Y here if you want full HID support to connect keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
diff -rNup a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig
--- a/drivers/usb/media/Kconfig 2005-07-17 08:09:04.000000000 +0200
+++ b/drivers/usb/media/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -2,11 +2,9 @@
# USB Multimedia device configuration
#
comment "USB Multimedia devices"
- depends on USB

config USB_DABUSB
tristate "DABUSB driver"
- depends on USB
---help---
A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
brought to you by the DAB-Team
@@ -19,11 +17,11 @@ config USB_DABUSB
module will be called dabusb.

comment "Video4Linux support is needed for USB Multimedia device support"
- depends on USB && VIDEO_DEV=n
+ depends on VIDEO_DEV=n

config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on VIDEO_DEV && EXPERIMENTAL
---help---
Say Y here if you have 3com homeconnect camera (vicam).

@@ -37,7 +35,7 @@ config USB_VICAM

config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on VIDEO_DEV && EXPERIMENTAL
---help---
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -55,7 +53,7 @@ config USB_DSBR

config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
"Xirlink PC Camera" to your computer's USB port. For more
@@ -76,7 +74,7 @@ config USB_IBMCAM

config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want support for webcams based on a Konica
chipset. This is known to work with the Intel YC76 webcam.
@@ -92,7 +90,7 @@ config USB_KONICAWC

config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/usb/ov511.txt> for more
@@ -108,7 +106,7 @@ config USB_OV511

config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/usb/se401.txt> for more
@@ -124,7 +122,7 @@ config USB_SE401

config USB_SN9C102
tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102 or SN9C103 PC Camera Controllers.
@@ -139,7 +137,7 @@ config USB_SN9C102

config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
@@ -156,7 +154,7 @@ config USB_STV680

config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
+ depends on VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
@@ -178,7 +176,7 @@ config USB_W9968CF

config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
+ depends on VIDEO_DEV
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
diff -rNup a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
--- a/drivers/usb/misc/Kconfig 2005-07-17 08:10:02.000000000 +0200
+++ b/drivers/usb/misc/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -2,11 +2,9 @@
# USB Miscellaneous driver configuration
#
comment "USB Miscellaneous drivers"
- depends on USB

config USB_EMI62
tristate "EMI 6|2m USB Audio interface support"
- depends on USB
---help---
This driver loads firmware to Emagic EMI 6|2m low latency USB
Audio and Midi interface.
@@ -21,7 +19,6 @@ config USB_EMI62

config USB_EMI26
tristate "EMI 2|6 USB Audio interface support"
- depends on USB
---help---
This driver loads firmware to Emagic EMI 2|6 low latency USB
Audio interface.
@@ -34,7 +31,7 @@ config USB_EMI26

config USB_AUERSWALD
tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Say Y here if you want to connect an Auerswald USB ISDN Device
to your computer's USB port.
@@ -44,7 +41,7 @@ config USB_AUERSWALD

config USB_RIO500
tristate "USB Diamond Rio500 support (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.txt>
@@ -55,7 +52,7 @@ config USB_RIO500

config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Say Y here if you want to connect a USB Lego Infrared Tower to your
computer's USB port.
@@ -68,7 +65,6 @@ config USB_LEGOTOWER

config USB_LCD
tristate "USB LCD driver support"
- depends on USB
help
Say Y here if you want to connect an USBLCD to your computer's
USB port. The USBLCD is a small USB interface board for
@@ -80,7 +76,6 @@ config USB_LCD

config USB_LED
tristate "USB LED driver support"
- depends on USB
help
Say Y here if you want to connect an USBLED device to your
computer's USB port.
@@ -90,7 +85,6 @@ config USB_LED

config USB_CYTHERM
tristate "Cypress USB thermometer driver support"
- depends on USB
help
Say Y here if you want to connect a Cypress USB thermometer
device to your computer's USB port. This device is also known
@@ -103,7 +97,6 @@ config USB_CYTHERM

config USB_PHIDGETKIT
tristate "USB PhidgetKit support"
- depends on USB
help
Say Y here if you want to connect a PhidgetKit USB device from
Phidgets Inc.
@@ -113,7 +106,6 @@ config USB_PHIDGETKIT

config USB_PHIDGETSERVO
tristate "USB PhidgetServo support"
- depends on USB
help
Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
servo controller version 2.0 or 3.0.
@@ -125,7 +117,6 @@ config USB_PHIDGETSERVO

config USB_IDMOUSE
tristate "Siemens ID USB Mouse Fingerprint sensor support"
- depends on USB
help
Say Y here if you want to use the fingerprint sensor on
the Siemens ID Mouse. There is also a Siemens ID Mouse
@@ -151,7 +142,7 @@ config USB_LD

config USB_TEST
tristate "USB testing driver (DEVELOPMENT)"
- depends on USB && USB_DEVICEFS && EXPERIMENTAL
+ depends on USB_DEVICEFS && EXPERIMENTAL
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
diff -rNup a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
--- a/drivers/usb/net/Kconfig 2005-07-17 08:09:05.000000000 +0200
+++ b/drivers/usb/net/Kconfig 2005-07-17 10:47:59.000000000 +0200
@@ -2,10 +2,13 @@
# USB Network devices configuration
#
comment "Networking support is needed for USB Network Adapter support"
- depends on USB && !NET
+ depends on !NET

-menu "USB Network Adapters"
- depends on USB && NET
+menuconfig USB_NET_DEVICES
+ bool "USB Network Adapters"
+ depends on NET
+
+if USB_NET_DEVICES

config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
@@ -308,4 +311,4 @@ config USB_ZD1201
To compile this driver as a module, choose M here: the
module will be called zd1201.

-endmenu
+endif
diff -rNup a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
--- a/drivers/usb/serial/Kconfig 2005-07-17 10:45:46.000000000 +0200
+++ b/drivers/usb/serial/Kconfig 2005-07-17 10:47:59.000000000 +0200
@@ -4,7 +4,6 @@

menuconfig USB_SERIAL
tristate "USB Serial Converter support"
- depends on USB
---help---
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
diff -rNup a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
--- a/drivers/usb/storage/Kconfig 2005-07-17 08:09:05.000000000 +0200
+++ b/drivers/usb/storage/Kconfig 2005-07-17 10:48:06.000000000 +0200
@@ -3,11 +3,9 @@
#

comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
- depends on USB

config USB_STORAGE
tristate "USB Mass Storage support"
- depends on USB
select SCSI
---help---
Say Y here if you want to connect USB mass storage devices to your
--
"If your attack is going too well, you're walking into an ambush."
-Infantry Journal
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Bodo Eggert: "[PATCH] [3/5+1] menu -> menuconfig part 1"
Previous message: Bodo Eggert: "Re: [PATCH] [1/5+1] menu -> menuconfig part 1"
In reply to: randy_dunlap: "Re: [PATCH] [1/5+1] menu -> menuconfig part 1"
Next in thread: randy_dunlap: "Re: [PATCH] [2/5+1] menu -> menuconfig part 1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]