Re: 2.6.12-mm1

From: Takashi Iwai
Date: Tue Jun 21 2005 - 11:44:04 EST


At Tue, 21 Jun 2005 18:27:54 +0200,
I wrote:
>
> At Tue, 21 Jun 2005 14:40:21 +0200,
> Brice Goglin wrote:
> >
> > Brice Goglin a écrit :
> > > Hi Andrew,
> > >
> > > I got this oops during boot.
> > > I copied it by hand since my machine crashed soon after (because of yenta).
> > > It doesn't occur when snd_maestro3 is skipped by discover.
> > >
> > > divide error: 0000 [#1]
> > > PREEMPT
> > > ...
> > > CPU: 0
> > > EIP: 0060:[<e8957f9f>] Not tainted VLI
> > > EFLAGS: 00000282 (2.6.12-mm1=LoulousMobiles)
> > > EIP is at and_m3_enable_ints+0x1f/0x40 [snd_maestro3]
> > > eax: 00000050 ebx: 00002400 ecx: 00000050 edx: 00002418
> > > esi: 00002418 edi: 00000000 ebp: 000000f0 esp: e6f5ce54
> > > ds: 007b es: 007b ss: 0068
> > > Process modprobe (pid: 2405, threadinfo=e6f5c000, task=e7a31570)
> > > ...
> > > Call trace:
> > > snd_m3_create+0x303/0x405 [snd_maestro3]
> >
> > The problem comes from git-alsa.patch.
> > Adding HV_INT_ENABLE to outw in snd_m3_enable_ints (in
> > sound/pci/maestro3.c) makes it generate a divide error
> > on my laptop.
> >
> > The attached patch reverts this and fixes my problem.
> >
> > Signed-off-by: Brice Goglin <Brice.Goglin@xxxxxxxxxxxx>
>
> Well, this disables the h/w volume controls completely, so it's not a
> generic solution.
>
> Does the patch below have any improvement?

... or this one if still causing a problem?


Takashi

--- linux/sound/pci/maestro3.c 20 May 2005 17:39:26 -0000 1.80
+++ linux/sound/pci/maestro3.c 21 Jun 2005 16:31:10 -0000
@@ -1050,11 +1050,6 @@
* lowlevel functions
*/

-#define big_mdelay(msec) do {\
- set_current_state(TASK_UNINTERRUPTIBLE);\
- schedule_timeout(((msec) * HZ) / 1000);\
-} while (0)
-
inline static void snd_m3_outw(m3_t *chip, u16 value, unsigned long reg)
{
outw(value, chip->iobase + reg);
@@ -1096,7 +1091,7 @@
static void snd_m3_assp_halt(m3_t *chip)
{
chip->reset_state = snd_m3_inb(chip, DSP_PORT_CONTROL_REG_B) & ~REGB_STOP_CLOCK;
- big_mdelay(10);
+ msleep(10);
snd_m3_outb(chip, chip->reset_state & ~REGB_ENABLE_RESET, DSP_PORT_CONTROL_REG_B);
}

@@ -2108,9 +2103,9 @@
*/
tmp = inw(io + RING_BUS_CTRL_A);
outw(RAC_SDFS_ENABLE|LAC_SDFS_ENABLE, io + RING_BUS_CTRL_A);
- big_mdelay(20);
+ msleep(20);
outw(tmp, io + RING_BUS_CTRL_A);
- big_mdelay(50);
+ msleep(50);
#endif
}

@@ -2525,9 +2520,13 @@
snd_m3_enable_ints(m3_t *chip)
{
unsigned long io = chip->iobase;
+ unsigned short val;

/* TODO: MPU401 not supported yet */
- outw(ASSP_INT_ENABLE | HV_INT_ENABLE /*| MPU401_INT_ENABLE*/, io + HOST_INT_CTRL);
+ val = ASSP_INT_ENABLE /*| MPU401_INT_ENABLE*/;
+ if (chip->hv_quirk && (chip->hv_quirk->config & HV_CTRL_ENABLE))
+ val |= HV_INT_ENABLE;
+ outw(val, io + HOST_INT_CTRL);
outb(inb(io + ASSP_CONTROL_C) | ASSP_HOST_INT_ENABLE,
io + ASSP_CONTROL_C);
}
@@ -2589,7 +2588,7 @@
snd_pcm_suspend_all(chip->pcm);
snd_ac97_suspend(chip->ac97);

- big_mdelay(10); /* give the assp a chance to idle.. */
+ msleep(10); /* give the assp a chance to idle.. */

snd_m3_assp_halt(chip);

@@ -2697,6 +2696,8 @@
}

spin_lock_init(&chip->reg_lock);
+ spin_lock_init(&chip->ac97_lock);
+
switch (pci->device) {
case PCI_DEVICE_ID_ESS_ALLEGRO:
case PCI_DEVICE_ID_ESS_ALLEGRO_1:
@@ -2765,6 +2766,8 @@
snd_m3_assp_init(chip);
snd_m3_amp_enable(chip, 1);

+ tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
+
if (request_irq(pci->irq, snd_m3_interrupt, SA_INTERRUPT|SA_SHIRQ,
card->driver, (void *)chip)) {
snd_printk("unable to grab IRQ %d\n", pci->irq);
@@ -2786,9 +2789,6 @@
return err;
}

- spin_lock_init(&chip->ac97_lock);
- tasklet_init(&chip->hwvol_tq, snd_m3_update_hw_volume, (unsigned long)chip);
-
if ((err = snd_m3_mixer(chip)) < 0)
return err;

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/