Re: Playing with SATA NCQ

[Erik Slagter]

On Sun, 2005-05-29 at 12:59 -0400, Jeff Garzik wrote:

> >>Nope.  ata_piix does not support NCQ (because the h/w doesn't support).
> > If I understand this correctly: NCQ does not work on ICH7 in native mode
> > (using ata_piix) because in this mode there is no NCQ available, right?
> 
> To be more specific, there are these modes:
> 
> 	legacy mode		no NCQ
> 	combined mode		no NCQ
> 	native mode		no NCQ
> 	AHCI mode		NCQ

Thx.

> > My question was if there is a fundamental reason why the AHCI mode of
> > the ICH6/7 must be enabled by the BIOS, is there a reason why the kernel
> > doesn't do it, or can't do it?
> 
> The BIOS sets up PCI resources necessary to use AHCI mode.

Ok. So there's absolutely no way to do that afterwards? It'd really be a
pity :-(

On the same subject: is there a reason why ICH6 gets "BAR0-3 ignored"
and always gets the legacy i/o ports and IRQ's assigned? I'd say there
is absolutely no need to be compatible in this way, the PCI code can
assign the IRQ and I/O ports as with any other PCI device?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/