Re: SATA/ATAPI

[Brian Jackson]

Just to check, you do have scsi cdrom support enabled right?

On 4/21/05, Tais M. Hansen <tais.hansen@xxxxxx> wrote:
> Hi,
> 
> I know there has been some talking about SATA/ATAPI being experimental and
> might not work at all under kernel-2.6.x.
> 
> One of my linux boxes has a Plextor DVD-RW drive with a SATA interface. The
> kernel sees this drive (ata3) but apparently doesn't tie it to a sdx device.
> The box also have a SATA harddisk, which is working just fine. The relevant
> dmesg output is pasted below.
> 
> Is there anything I can do to help the development of SATA/ATAPI devices?
> 
> libata version 1.10 loaded.
> sata_promise version 1.01
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
> ata1: SATA max UDMA/133 cmd 0xF8804200 ctl 0xF8804238 bmdma 0x0 irq 18
> ata2: SATA max UDMA/133 cmd 0xF8804280 ctl 0xF88042B8 bmdma 0x0 irq 18
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003
> 88:407f
> ata1: dev 0 ATA, max UDMA/133, 240121728 sectors:
> ata1: dev 0 configured for UDMA/133
> scsi0 : sata_promise
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_promise
>   Vendor: ATA       Model: Maxtor 6Y120M0    Rev: YAR5
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> sata_via version 1.1
> ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
> sata_via(0000:00:0f.0): routed to hard irq line 4
> ata3: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 20
> ata4: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 20
> ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000
> 88:0007
> ata3: dev 0 ATAPI, max UDMA/33
> ata3: dev 0 configured for UDMA/33
> scsi2 : sata_via
> ata4: no device found (phy stat 00000000)
> scsi3 : sata_via
> SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
> SCSI device sda: drive cache: write back
>  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> 
> --
> Regards,
> Tais M. Hansen
> OSD
> 
> ___________________________________________________________
> "If people had understood how patents would be granted when most of today's
> ideas were invented and had taken out patents, the industry would be at a
> complete standstill today." -Bill Gates (1991)
> 
> 
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/