Re: Linux 2.6.12-rc3: various swsusp problems

[Pavel Machek]

Hi!

> there's some problems with swsusp in 2.6.12-rc3 (x86_64):

Are they new or were they in -rc2, too?

> 1. Is it necessary to print the following message during regular boot?
>    swsusp: Suspend partition has wrong signature?
>    It is a bit annoying and I believe it will confuse some swsusp
>    users.

Hmm, feel free to provide a patch. (I need something to try git on :-).

> 2. PCMCIA related hangs during swsusp.
>    swsusp hangs after freeing memory when either cardmgr is running
>    or pcmcia cards are *physically* inserted. It is insufficient
>    to do a 'cardctl eject' the cards must be removed, too, for
>    swsusp not to hang. I do suspect some problem with the
>    'pccardd' kernel threads.

Did it work with any older kernel? Which driver is it? yenta?

> 3. Sometimes during the search for the suspend hang reason the system
>    went during suspend into a lightshow of:
>    eth0: Too much work at interrupt!
>    and some line that ends in:
>    release_console_sem+0x13d/0x1c0)
>    The start of the line is not readable as it just flickers by in
>    the eth0 message limbo. NIC is a built in RTL-8169 Gigabit Ethernet
>    (rev 10). Oh, no chance for a serial console capture as there's no
>    built in serial device in this laptop.

How repeatable is that? Will NIC work okay if you rmmod/insmod its driver?
				Pavel
-- 
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/