Re: How's the nforce4 support in Linux?

[Marcin Dalecki]

On 2005-03-26, at 16:19, Arjan van de Ven wrote:

> `
> > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hda: dma_intr: error=0x84 { DriveStatusError BadCRC
>
> BadCRC is 99% sure a cabling issue; either a bad/overheated cable or a
> cable used at too high a speed for the cable.

No. It is more likely that the timing programming between the disk and 
host controller
are in a miss-match state. UDMA mode detection can come in to mind too.
It makes sense to experiment with hdparm to see if the problem goes 
away in non
Ultra DMA modes.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/