Re: Garbage on serial console after serial driver loads

[Phil Oester]

On Sat, Mar 26, 2005 at 04:37:29PM +0000, Russell King wrote:
> > But intererstingly, on identical boxes, the garbage only appears on
> > those hooked up to a PortMaster device - those using a Cyclades never
> > display this problem. (???)
> 
> Sorry, I don't understand your scenarios.  Can you explain the
> circumstances under which you see corruption?
> 
> From the kernel messages you've quoted above, I can only think that
> you're not using ttyS0 as the serial console - if you were, my
> understanding of this issue would indicate that you should get the
> garbage immediately after the line starting "Serial:"
> 
> Either my understanding of the cause of this problem is wrong, or
> I'm not understanding your setup.

I have a number of PowerEdge 2550 servers.  All are setup with serial
console on ttyS0 @ 9600.  One group uses a (old) Portmaster device for console
access, the other group uses a Cyclades device.  Only those servers
using the Portmaster device exhibit the garbage problem.  The Cyclades
group never displays garbage on boot.

Phil

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/