Re: How's the nforce4 support in Linux?

[Chuck]

On Fri, 2005-03-25 at 23:59 +0100, Julien Wajsberg wrote:
> Mar 25 22:42:55 evenflow kernel: hda: dma_timer_expiry: dma status == 0x60
> Mar 25 22:42:55 evenflow kernel: hda: DMA timeout retry
> Mar 25 22:42:55 evenflow kernel: hda: timeout waiting for DMA
> Mar 25 22:42:55 evenflow kernel: hda: status error: status=0x58 {
> DriveReady SeekComplete DataRequest }
> Mar 25 22:42:55 evenflow kernel:
> Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command
> Mar 25 22:42:55 evenflow kernel: hda: status timeout: status=0xd0 { Busy }
> Mar 25 22:42:55 evenflow kernel:
> Mar 25 22:42:55 evenflow kernel: ide: failed opcode was: unknown
> Mar 25 22:42:55 evenflow kernel: hdb: DMA disabled
> Mar 25 22:42:55 evenflow kernel: hda: drive not ready for command

(something) like the same problem here:  

I get lots of:

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown


The disk (WDC WD800JB) is about 1/2 year old. 
I've checked the drive in my old system... nothing!
Also WD's diagnostic kit doesn't report any problems like bad sectors,
or other troubles...  

(Please CC me, I'm not on the list)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/