Re: [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver

[Dmitry Torokhov]

On Mon, 21 Mar 2005 16:31:08 +0100, Kenan Esau <kenan.esau@xxxxxxxx> wrote:
> Am Montag, den 21.03.2005, 09:52 -0500 schrieb Dmitry Torokhov:
> > On Mon, 21 Mar 2005 13:44:07 +0100, Vojtech Pavlik <vojtech@xxxxxxx> wrote:
> > > On Tue, Mar 15, 2005 at 02:25:42PM +0100, Kenan Esau wrote:
> > > > Here is a new version of the patch:
> > > >       - minimal changes
> > > >       - reintroduced DMI-probing
> > > >
> > > > I had a look at the synaptic-sources to see how the pass-through-mode is
> > > > implemented. We'll see if something similar to this also works with the
> > > > lifebook.
> > >
> > > Thanks, I applied this version of the patch to my tree. It'll appear in
> > > next -mm, and in 2.6.13.
> > >
> >
> > There are couple of things that I an concerned with:
> >
> > 1. I don't like that it overrides meaning of max_proto parameter to be
> > exactly the protocol specified.
> 
> Yeah -- I agree. I also don't like that double-meaning. That was the
> reason why I originally proposed the use of a new parameter...
> 
> > However, if you take my psmouse
> > protocol switching through sysfs patch we can drop that change and
> > require that non auto-detectable protocols be activated through sysfs
> > after loading the driver.
> 
> I think that would also be a good solution.
> 
> > 2. It looks like it bypasses rate and resolution setting in
> > psmouse_initialize. What was the reason for it? Does setting rate or
> > resolution disturbs lifebook mode? If so the driver has to implement
> > it's own set_rate and set_resolution handlers so when one tries to
> > change rate from userspace (through sysfs) the request would be
> > ignored.
> 
> IMHO it does not make sense to call psmouse_initialize() although it
> does not disturb lifebook-mode. But setting resolution is already done
> during lifebook_initialize(). And there psmouse->set_resolution() and
> psmouse->set_rate() are used so setting resolution and rate should also
> work via sysfs.
> 

Oh, I see. But I think that setting rate and resolution as well as
enabling the device should be removed from lifebook_initialize.
*_initialize() functions should only be used to set up corresponding
protocol, the reset of the initializationis done by psmouse-base
independent of the protocol used.

-- 
Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/