Re: [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver

[Vojtech Pavlik]

On Sun, Feb 13, 2005 at 07:14:44PM +0100, Kenan Esau wrote:
> Am Sonntag, den 13.02.2005, 13:01 +0100 schrieb Vojtech Pavlik: 
> > On Sun, Feb 13, 2005 at 11:05:00AM +0100, Kenan Esau wrote:
> >  
> > > > > This
> > > > > sequence does not always work and there is not something like a "magic
> > > > > knock sequence".
> > > > 
> > > > You mean that the only needed bit is setting the resolution to '7'?
> > > 
> > > The lifebook touchscreen has some extensions to the standard protocol:
> > > 
> > > 0xe8 0x06: Stop absolute coordinate output 
> > > 0xe8 0x07: Start absolute coordinate outpout (3-byte packets)
> > > 0xe8 0x08: Start absolute coord. output with 6-byte packets
> > 
> > Are the 6-byte packets carrying any more information than the 3-byte
> > packets do, for example pressure? Would it be useful to go for the
> > 6-byte mode instead in the driver?
> 
> No the 6-byte mode does not carry any more information. Sorry but no
> pressure-info... 

I wonder what it's good for then - there must be a reason.

> > Have you tried whether the controller responds to the GETID (f2),
> > GETINFO (e9) and POLL (eb) commands? Maybe we could detect it that way.
> 
> I have to try those commands and check the response. I know that they
> are supported but I have never tried them.
> 
> [...]
> 
> > > If you agree I will take your patch as the basis and make it work. Now I
> > > know how you want it to look like.
> > 
> > That would be very much appreciated.
> 
> OK. I'll send you a new patch within the next week.

Thanks.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/