Linux version 2.6.11-rc3-bk5 (root@shuttle) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Tue Feb 8 15:24:46 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 AWARD ) @ 0x000f70a0 ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 Built 1 zonelists Kernel command line: root=/dev/hda1 ro elevator=cfq Initializing CPU#0 CPU 0 irqstacks, hard=c035b000 soft=c035a000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2530.237 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 906500k/917504k available (1589k kernel code, 10552k reserved, 670k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4997.12 BogoMIPS (lpj=2498560) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1eb8) NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050125 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS962 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [FUTS] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (55 C) Real Time Clock Driver v1.12 ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler cfq registered (default) 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xf8802000, 00:30:1b:ab:5d:a1, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y200P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST RW/DVD GCC-4320B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 120k freed Adding 979956k swap on /dev/hda3. Priority:-1 extents:1 Linux agpgart interface v0.100 (c) Dave Jones nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver ReiserFS: hda2: found reiserfs format "3.6" with standard journal ReiserFS: hda2: using ordered data mode ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda2: checking transaction log (hda2) ReiserFS: hda2: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 agpgart: Detected SiS 651 chipset agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 128M @ 0xd0000000 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller ohci_hcd 0000:00:03.0: irq 9, pci mem 0xe2008000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 4 (level, low) -> IRQ 4 ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) ohci_hcd 0000:00:03.1: irq 4, pci mem 0xe2004000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 3 (level, low) -> IRQ 3 ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3) ohci_hcd 0000:00:03.2: irq 3, pci mem 0xe2005000 ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 usb 1-1: new low speed USB device using ohci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 microcode: CPU0 updated from revision 0x24 to 0x37, date = 06042003 usbcore: deregistering driver usbhid usbhid: Unknown parameter `usbhid.mousepoll' usbhid: Unknown parameter `usbhid.mousepoll' input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usb 1-1: USB disconnect, address 2 usb 1-1: new low speed USB device using ohci_hcd and address 3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1 usbcore: deregistering driver usbhid input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver usb 1-1: USB disconnect, address 3 usb 1-1: new low speed USB device using ohci_hcd and address 4 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-1