Bug when using custom baud rates....

[Rogier Wolff]

Hi,

When using custom baud rates, the code does: 


       if ((new_serial.baud_base != priv->baud_base) ||
            (new_serial.baud_base < 9600))
                return -EINVAL;

Which translates to english as: 

	If you changed the baud-base, OR the new one is
	invalid, return invalid. 

but it should be:

	If you changed the baud-base, OR the new one is
	invalid, return invalid. 

Patch attached. 

	Roger. 

-- 
** R.E.Wolff@xxxxxxxxxxxx ** http://www.BitWizard.nl/ ** +31-15-2600998 **
*-- BitWizard writes Linux device drivers for any device you may have! --*
Q: It doesn't work. A: Look buddy, doesn't work is an ambiguous statement. 
Does it sit on the couch all day? Is it unemployed? Please be specific! 
Define 'it' and what it isn't doing. --------- Adapted from lxrbot FAQ
diff -ur linux-2.4.28.clean/drivers/usb/serial/ftdi_sio.c linux-2.4.28.ftdi_fix/drivers/usb/serial/ftdi_sio.c
--- linux-2.4.28.clean/drivers/usb/serial/ftdi_sio.c	Wed Jan 19 16:31:03 2005
+++ linux-2.4.28.ftdi_fix/drivers/usb/serial/ftdi_sio.c	Thu Jan 20 15:47:49 2005
@@ -981,7 +981,7 @@
 		goto check_and_exit;
 	}
 
-	if ((new_serial.baud_base != priv->baud_base) ||
+	if ((new_serial.baud_base != priv->baud_base) &&
 	    (new_serial.baud_base < 9600))
 		return -EINVAL;
 
Only in linux-2.4.28.ftdi_fix/drivers/usb/serial: ftdi_sio.c~