[PATCH 3/4] ppc32: platform_device conversion from OCP

From: Kumar Gala
Date: Tue Jan 18 2005 - 10:43:42 EST


Convert MPC8540 ADS, MPC8560 ADS, MPC8555 CDS and SBC8560 reference boards
from using OCP to platform_device.

Signed-off-by: Kumar Gala <kumar.gala@xxxxxxxxxxxxx>

---
diff -Nru a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c 2005-01-17 22:31:44 -06:00
@@ -32,6 +32,7 @@
#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/fsl_devices.h>

#include <asm/system.h>
#include <asm/pgtable.h>
@@ -48,50 +49,11 @@
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <mm/mmu_decl.h>

-#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>

-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON
- | GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
- .phyid = 0,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON
- | GFAR_HAS_PHY_INTR | GFAR_HAS_COALESCE),
- .phyid = 1,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_fec_def = {
- .interruptTransmit = MPC85xx_IRQ_FEC,
- .interruptError = MPC85xx_IRQ_FEC,
- .interruptReceive = MPC85xx_IRQ_FEC,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = 0,
- .phyid = 3,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
/* ************************************************************************
*
* Setup the architecture
@@ -100,10 +62,9 @@
static void __init
mpc8540ads_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
+ struct gianfar_platform_data *pdata;

/* get the core frequency */
freq = binfo->bi_intfreq;
@@ -130,23 +91,30 @@
invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
#endif

- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
- }
-
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 2);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet2addr, 6);
- }
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 3;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);

#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -158,8 +126,6 @@
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}

/* ************************************************************************ */
@@ -205,6 +171,8 @@
*(char *) (r7 + KERNELBASE) = 0;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+
+ identify_ppc_sys_by_id(mfspr(SVR));

/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc8540ads_setup_arch;
diff -Nru a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h
--- a/arch/ppc/platforms/85xx/mpc8555_cds.h 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/mpc8555_cds.h 2005-01-17 22:31:44 -06:00
@@ -18,7 +18,7 @@
#define __MACH_MPC8555CDS_H__

#include <linux/config.h>
-#include <linux/serial.h>
+#include <syslib/ppc85xx_setup.h>
#include <platforms/85xx/mpc85xx_cds_common.h>

#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
diff -Nru a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c 2005-01-17 22:31:44 -06:00
@@ -32,6 +32,7 @@
#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/fsl_devices.h>

#include <asm/system.h>
#include <asm/pgtable.h>
@@ -48,7 +49,7 @@
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <asm/cpm2.h>
#include <mm/mmu_decl.h>

@@ -58,34 +59,6 @@

extern void cpm2_reset(void);

-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON | GFAR_HAS_COALESCE
- | GFAR_HAS_PHY_INTR),
- .phyid = 0,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR
- | GFAR_HAS_RMON | GFAR_HAS_COALESCE
- | GFAR_HAS_PHY_INTR),
- .phyid = 1,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
/* ************************************************************************
*
* Setup the architecture
@@ -95,11 +68,10 @@
static void __init
mpc8560ads_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
-
+ struct gianfar_platform_data *pdata;
+
cpm2_reset();

/* get the core frequency */
@@ -117,17 +89,22 @@
mpc85xx_setup_hose();
#endif

- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
- }
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);

#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -139,8 +116,6 @@
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}

static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
@@ -221,6 +196,8 @@
*(char *) (r7 + KERNELBASE) = 0;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+
+ identify_ppc_sys_by_id(mfspr(SVR));

/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc8560ads_setup_arch;
diff -Nru a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c 2005-01-17 22:31:44 -06:00
@@ -43,7 +43,6 @@
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
-#include <asm/ocp.h>

#include <mm/mmu_decl.h>

diff -Nru a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c 2005-01-17 22:31:44 -06:00
@@ -32,6 +32,7 @@
#include <linux/initrd.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
+#include <linux/fsl_devices.h>

#include <asm/system.h>
#include <asm/pgtable.h>
@@ -48,7 +49,7 @@
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/immap_cpm2.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <asm/kgdb.h>

#include <mm/mmu_decl.h>
@@ -129,32 +130,6 @@
#endif
};

-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR |
- GFAR_HAS_PHY_INTR),
- .phyid = 0,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT5,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR |
- GFAR_HAS_PHY_INTR),
- .phyid = 1,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
/* ************************************************************************ */
int
mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -335,11 +310,10 @@
static void __init
mpc85xx_cds_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
-
+ struct gianfar_platform_data *pdata;
+
/* get the core frequency */
freq = binfo->bi_intfreq;

@@ -372,17 +346,23 @@
invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
#endif

- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
- }
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);

- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
- }

#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -394,8 +374,6 @@
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}

/* ************************************************************************ */
@@ -443,6 +421,8 @@
*(char *) (r7 + KERNELBASE) = 0;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+
+ identify_ppc_sys_by_id(mfspr(SVR));

/* setup the PowerPC module struct */
ppc_md.setup_arch = mpc85xx_cds_setup_arch;
diff -Nru a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
--- a/arch/ppc/platforms/85xx/sbc8560.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/sbc8560.c 2005-01-17 22:31:44 -06:00
@@ -32,6 +32,7 @@
#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/fsl_devices.h>

#include <asm/system.h>
#include <asm/pgtable.h>
@@ -48,37 +49,12 @@
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <mm/mmu_decl.h>

#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>

-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT6,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
- .phyid = 25,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT7,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
- .phyid = 26,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
-
#ifdef CONFIG_SERIAL_8250
static void __init
sbc8560_early_serial_map(void)
@@ -125,10 +101,9 @@
static void __init
sbc8560_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
+ struct gianfar_platform_data *pdata;

/* get the core frequency */
freq = binfo->bi_intfreq;
@@ -153,18 +128,22 @@
invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
#endif

- /* Set up MAC addresses for the Ethernet devices */
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
- }
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT6;
+ pdata->phyid = 25;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT7;
+ pdata->phyid = 26;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);

#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -176,8 +155,6 @@
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}

/* ************************************************************************ */
@@ -220,6 +197,8 @@
*(char *) (r7 + KERNELBASE) = 0;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+
+ identify_ppc_sys_by_id(mfspr(SVR));

/* setup the PowerPC module struct */
ppc_md.setup_arch = sbc8560_setup_arch;
diff -Nru a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
--- a/arch/ppc/platforms/85xx/sbc85xx.c 2005-01-17 22:31:44 -06:00
+++ b/arch/ppc/platforms/85xx/sbc85xx.c 2005-01-17 22:31:44 -06:00
@@ -42,7 +42,6 @@
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
-#include <asm/ocp.h>

#include <mm/mmu_decl.h>


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/