Re: yenta_socket rapid fires interrupts

[DHollenbeck]

Linus Torvalds wrote:

> Can you add a "printk()" to "yenta_events()" that shows the value of both 
> "csc" and "cb_event", and additionally shows CB_STATUS. Something like 
> the appended (and totally untested) patch..
>
> It's going to be very noisy when the problem happens (you'll see 10000 
> lines scroll by very quickly), but it would be good to see what the last 
> lines were. Just to see if some event/state seems stuck..
>
> 		Linus
>
> ===== drivers/pcmcia/yenta_socket.c 1.65 vs edited =====
> --- 1.65/drivers/pcmcia/yenta_socket.c	2004-12-01 00:14:04 -08:00
> +++ edited/drivers/pcmcia/yenta_socket.c	2005-01-11 11:52:10 -08:00
> @@ -401,7 +401,7 @@
> static unsigned int yenta_events(struct yenta_socket *socket)
> {
> 	u8 csc;
> -	u32 cb_event;
> +	u32 cb_event, cb_state;
> 	unsigned int events;
>
> 	/* Clear interrupt status for the event */
> @@ -409,6 +409,9 @@
> 	cb_writel(socket, CB_SOCKET_EVENT, cb_event);
>
> 	csc = exca_readb(socket, I365_CSC);
> +
> +	cb_state = cb_readl(socket, CB_SOCKET_STATE);
> +	printk("yenta: event %08x state %08x csc %02x\n", cb_event, cb_state, csc);
>
> 	events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ;
> 	events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0;
>
>  

TI 1520 data sheet URL:   http://www-s.ti.com/sc/ds/pci1520.pdf

output from printk:

only the last several lines were caught.  There is toggling between two 
states, the very first state was not captured.
:
:
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
:
:
:
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
yenta: event 00000000 state 30000006 csc 00
yenta: event 00000000 state 30000829 csc 00
irq 11: nobody cared (try booting with the "irqpoll" option.
[<c012b752>] __report_bad_irq+0x22/0x90
[<c012b868>] note_interrupt+0x78/0xc0
[<c012b11d>] __do_IRQ+0x13d/0x160
[<c0104aba>] do_IRQ+0x1a/0x30
[<c010337a>] common_interrupt+0x1a/0x20
[<c012af99>] handle_IRQ_event+0x29/0x70
[<c012b0b1>] __do_IRQ+0xd1/0x160
[<c0104aba>] do_IRQ+0x1a/0x30
[<c010337a>] common_interrupt+0x1a/0x20
[<c012007b>] sys_getresgid+0xb/0xa0
[<c0117750>] __do_softirq+0x30/0xa0
[<c0120060>] sys_setresgid+0x120/0x130
[<c01177f5>] do_softirq+0x35/0x40
[<c012af65>] irq_exit+0x35/0x40
[<c0104abf>] do_IRQ+0x1f/0x30
[<c010337a>] common_interrupt+0x1a/0x20
[<c01005b0>] default_idle+0x0/0x40
[<c038007b>] ic_setup_if+0xcb/0xd0
[<c01005d3>] default_idle+0x23/0x40
[<c010064c>] cpu_idle+0x1c/0x50
[<c036873c>] start_kernel+0x13c/0x160
handlers:
[<c2838950>] (yenta_interrupt+0x0/0x40 [yenta_socket])
[<c2838950>] (yenta_interrupt+0x0/0x40 [yenta_socket])
Disabling IRQ #11

I can read bits in a datasheet, but their meaning in the context of this 
driver is better interpreted by somebody with more PCMCIA experience 
than me.  Thanks for your help!


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/