Re: 2.6.10-mm2: it87 sensor driver stops CPU fan

[Jean Delvare]

Hi again Simone,

> Today I've tried 2.6.10-mm2 compiled for x86_64 and found something
> bad. As soon as I modprobe it87 (one of the i2c sensors drivers) the
> CPU fan  completely halts and the CPU temperature skyrockets even
> while idle. For context:
> I have an Athlon64 3200+ on a Gigabyte K8VT800 motherboard (i2c_viapro
> module) running Gentoo compiled in x86_64 mode, it87 is controlled
> through ISA bus,  VT8237 ISA bridge.

I would also be interested in the output of dmidecode [1] for your
system. This would allow me to add a workaround for your board to the
it87 driver, since the BIOS seems not to properly intialize the chip.
Sadly, there are probably many other boards which would need similar
workarounds for this chips or any other with PWM capabilities, and I
would better see the bogus BIOSes fixed than as many workarounds in our
drivers...

BTW, if you don't have the latest version of your motherboard BIOS
already, it could be worth upgrading, just in case it helps (I wouldn't
put too much hope there though).

[1] http://www.nongnu.org/dmidecode/

Thanks,
-- 
Jean Delvare
http://khali.linux-fr.org/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/