Re: [PATCH] I2C patches for 2.6.10
From: Greg KH
Date: Sat Jan 08 2005 - 03:51:14 EST
ChangeSet 1.1938.439.53, 2005/01/07 11:14:41-08:00, mhoffman@xxxxxxxxxxxxx
[PATCH] I2C: add new sensors driver: SMSC LPC47B397-NC
This patch (3rd time's a charm) adds support for the SMSC LPC47B397-NC
sensor chip. It was sponsored by In-Store Broadcasting Network.
Signed-off-by: Craig Kelly (In-Store Broadcasting Network)
Signed-off-by: Glenn Ball (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman <mhoffman@xxxxxxxxxxxxx>
Documentation/i2c/chips/smsc47b397.txt | 146 +++++++++++++
drivers/i2c/chips/Kconfig | 12 +
drivers/i2c/chips/Makefile | 1
drivers/i2c/chips/smsc47b397.c | 353 +++++++++++++++++++++++++++++++++
include/linux/i2c-id.h | 1
5 files changed, 513 insertions(+)
diff -Nru a/Documentation/i2c/chips/smsc47b397.txt b/Documentation/i2c/chips/smsc47b397.txt
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/Documentation/i2c/chips/smsc47b397.txt 2005-01-07 14:53:44 -08:00
@@ -0,0 +1,146 @@
+November 23, 2004
+
+The following specification describes the SMSC LPC47B397-NC sensor chip
+(for which there is no public datasheet available). This document was
+provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
+by Mark M. Hoffman <mhoffman@xxxxxxxxxxxxx>.
+
+* * * * *
+
+Methods for detecting the HP SIO and reading the thermal data on a dc7100.
+
+The thermal information on the dc7100 is contained in the SIO Hardware Monitor
+(HWM). The information is accessed through an index/data pair. The index/data
+pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
+HWM Base address can be obtained from Logical Device 8, registers 0x60 (MSB)
+and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
+0x480 and 0x481 for the index/data pair.
+
+Reading temperature information.
+The temperature information is located in the following registers:
+Temp1 0x25 (Currently, this reflects the CPU temp on all systems).
+Temp2 0x26
+Temp3 0x27
+Temp4 0x80
+
+Programming Example
+The following is an example of how to read the HWM temperature registers:
+MOV DX,480H
+MOV AX,25H
+OUT DX,AL
+MOV DX,481H
+IN AL,DX
+
+AL contains the data in hex, the temperature in Celsius is the decimal
+equivalent.
+
+Ex: If AL contains 0x2A, the temperature is 42 degrees C.
+
+Reading tach information.
+The fan speed information is located in the following registers:
+ LSB MSB
+Tach1 0x28 0x29 (Currently, this reflects the CPU
+ fan speed on all systems).
+Tach2 0x2A 0x2B
+Tach3 0x2C 0x2D
+Tach4 0x2E 0x2F
+
+Important!!!
+Reading the tach LSB locks the tach MSB.
+The LSB Must be read first.
+
+How to convert the tach reading to RPM.
+The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
+The SIO counts the number of 90kHz (11.111us) pulses per revolution.
+RPM = 60/(TCount * 11.111us)
+
+Example:
+Reg 0x28 = 0x9B
+Reg 0x29 = 0x08
+
+TCount = 0x89B = 2203
+
+RPM = 60 / (2203 * 11.11111 E-6) = 2451 RPM
+
+Obtaining the SIO version.
+
+CONFIGURATION SEQUENCE
+To program the configuration registers, the following sequence must be followed:
+1. Enter Configuration Mode
+2. Configure the Configuration Registers
+3. Exit Configuration Mode.
+
+Enter Configuration Mode
+To place the chip into the Configuration State The config key (0x55) is written
+to the CONFIG PORT (0x2E).
+
+Configuration Mode
+In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
+the DATA PORT is at INDEX PORT address + 1.
+
+The desired configuration registers are accessed in two steps:
+a. Write the index of the Logical Device Number Configuration Register
+ (i.e., 0x07) to the INDEX PORT and then write the number of the
+ desired logical device to the DATA PORT.
+
+b. Write the address of the desired configuration register within the
+ logical device to the INDEX PORT and then write or read the config-
+ uration register through the DATA PORT.
+
+Note: If accessing the Global Configuration Registers, step (a) is not required.
+
+Exit Configuration Mode
+To exit the Configuration State the write 0xAA to the CONFIG PORT (0x2E).
+The chip returns to the RUN State. (This is important).
+
+Programming Example
+The following is an example of how to read the SIO Device ID located at 0x20
+
+; ENTER CONFIGURATION MODE
+MOV DX,02EH
+MOV AX,055H
+OUT DX,AL
+; GLOBAL CONFIGURATION REGISTER
+MOV DX,02EH
+MOV AL,20H
+OUT DX,AL
+; READ THE DATA
+MOV DX,02FH
+IN AL,DX
+; EXIT CONFIGURATION MODE
+MOV DX,02EH
+MOV AX,0AAH
+OUT DX,AL
+
+The registers of interest for identifying the SIO on the dc7100 are Device ID
+(0x20) and Device Rev (0x21).
+
+The Device ID will read 0X6F
+The Device Rev currently reads 0x01
+
+Obtaining the HWM Base Address.
+The following is an example of how to read the HWM Base Address located in
+Logical Device 8.
+
+; ENTER CONFIGURATION MODE
+MOV DX,02EH
+MOV AX,055H
+OUT DX,AL
+; CONFIGURE REGISTER CRE0,
+; LOGICAL DEVICE 8
+MOV DX,02EH
+MOV AL,07H
+OUT DX,AL ;Point to LD# Config Reg
+MOV DX,02FH
+MOV AL, 08H
+OUT DX,AL;Point to Logical Device 8
+;
+MOV DX,02EH
+MOV AL,60H
+OUT DX,AL ; Point to HWM Base Addr MSB
+MOV DX,02FH
+IN AL,DX ; Get MSB of HWM Base Addr
+; EXIT CONFIGURATION MODE
+MOV DX,02EH
+MOV AX,0AAH
+OUT DX,AL
diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
--- a/drivers/i2c/chips/Kconfig 2005-01-07 14:53:44 -08:00
+++ b/drivers/i2c/chips/Kconfig 2005-01-07 14:53:44 -08:00
@@ -239,6 +239,18 @@
This driver can also be built as a module. If so, the module
will be called pc87360.
+config SENSORS_SMSC47B397
+ tristate "SMSC LPC47B397-NC"
+ depends on I2C && EXPERIMENTAL
+ select I2C_SENSOR
+ select I2C_ISA
+ help
+ If you say yes here you get support for the SMSC LPC47B397-NC
+ sensor chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called smsc47b397.
+
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
depends on I2C && EXPERIMENTAL
diff -Nru a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
--- a/drivers/i2c/chips/Makefile 2005-01-07 14:53:44 -08:00
+++ b/drivers/i2c/chips/Makefile 2005-01-07 14:53:44 -08:00
@@ -30,6 +30,7 @@
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
+obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
diff -Nru a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/i2c/chips/smsc47b397.c 2005-01-07 14:53:44 -08:00
@@ -0,0 +1,353 @@
+/*
+ smsc47b397.c - Part of lm_sensors, Linux kernel modules
+ for hardware monitoring
+
+ Supports the SMSC LPC47B397-NC Super-I/O chip.
+
+ Author/Maintainer: Mark M. Hoffman <mhoffman@xxxxxxxxxxxxx>
+ Copyright (C) 2004 Utilitek Systems, Inc.
+
+ derived in part from smsc47m1.c:
+ Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@xxxxxxxxx>
+ Copyright (C) 2004 Jean Delvare <khali@xxxxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+/* Address is autodetected, there is no default value */
+static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END };
+static struct i2c_force_data forces[] = {{NULL}};
+
+enum chips { any_chip, smsc47b397 };
+static struct i2c_address_data addr_data = {
+ .normal_i2c = normal_i2c,
+ .normal_isa = normal_isa,
+ .probe = normal_i2c, /* cheat */
+ .ignore = normal_i2c, /* cheat */
+ .forces = forces,
+};
+
+/* Super-I/0 registers and commands */
+
+#define REG 0x2e /* The register to read/write */
+#define VAL 0x2f /* The value to read/write */
+
+static inline void superio_outb(int reg, int val)
+{
+ outb(reg, REG);
+ outb(val, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+ outb(reg, REG);
+ return inb(VAL);
+}
+
+/* select superio logical device */
+static inline void superio_select(int ld)
+{
+ superio_outb(0x07, ld);
+}
+
+static inline void superio_enter(void)
+{
+ outb(0x55, REG);
+}
+
+static inline void superio_exit(void)
+{
+ outb(0xAA, REG);
+}
+
+#define SUPERIO_REG_DEVID 0x20
+#define SUPERIO_REG_DEVREV 0x21
+#define SUPERIO_REG_BASE_MSB 0x60
+#define SUPERIO_REG_BASE_LSB 0x61
+#define SUPERIO_REG_LD8 0x08
+
+#define SMSC_EXTENT 0x02
+
+/* 0 <= nr <= 3 */
+static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80};
+#define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)])
+
+/* 0 <= nr <= 3 */
+#define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr))
+#define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr))
+
+struct smsc47b397_data {
+ struct i2c_client client;
+ struct semaphore lock;
+
+ struct semaphore update_lock;
+ unsigned long last_updated; /* in jiffies */
+ int valid;
+
+ /* register values */
+ u16 fan[4];
+ u8 temp[4];
+};
+
+static int smsc47b397_read_value(struct i2c_client *client, u8 reg)
+{
+ struct smsc47b397_data *data = i2c_get_clientdata(client);
+ int res;
+
+ down(&data->lock);
+ outb(reg, client->addr);
+ res = inb_p(client->addr + 1);
+ up(&data->lock);
+ return res;
+}
+
+static struct smsc47b397_data *smsc47b397_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct smsc47b397_data *data = i2c_get_clientdata(client);
+ int i;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies - data->last_updated, (unsigned long)HZ)
+ || time_before(jiffies, data->last_updated) || !data->valid) {
+
+ dev_dbg(&client->dev, "starting device update...\n");
+
+ /* 4 temperature inputs, 4 fan inputs */
+ for (i = 0; i < 4; i++) {
+ data->temp[i] = smsc47b397_read_value(client,
+ SMSC47B397_REG_TEMP(i));
+
+ /* must read LSB first */
+ data->fan[i] = smsc47b397_read_value(client,
+ SMSC47B397_REG_FAN_LSB(i));
+ data->fan[i] |= smsc47b397_read_value(client,
+ SMSC47B397_REG_FAN_MSB(i)) << 8;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+
+ dev_dbg(&client->dev, "... device update complete\n");
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+/* TEMP: 0.001C/bit (-128C to +127C)
+ REG: 1C/bit, two's complement */
+static int temp_from_reg(u8 reg)
+{
+ return (s8)reg * 1000;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+ struct smsc47b397_data *data = smsc47b397_update_device(dev);
+ return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr]));
+}
+
+#define sysfs_temp(num) \
+static ssize_t show_temp##num(struct device *dev, char *buf) \
+{ \
+ return show_temp(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL)
+
+sysfs_temp(1);
+sysfs_temp(2);
+sysfs_temp(3);
+sysfs_temp(4);
+
+#define device_create_file_temp(client, num) \
+ device_create_file(&client->dev, &dev_attr_temp##num##_input)
+
+/* FAN: 1 RPM/bit
+ REG: count of 90kHz pulses / revolution */
+static int fan_from_reg(u16 reg)
+{
+ return 90000 * 60 / reg;
+}
+
+/* 0 <= nr <= 3 */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+ struct smsc47b397_data *data = smsc47b397_update_device(dev);
+ return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr]));
+}
+
+#define sysfs_fan(num) \
+static ssize_t show_fan##num(struct device *dev, char *buf) \
+{ \
+ return show_fan(dev, buf, num-1); \
+} \
+static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL)
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+sysfs_fan(4);
+
+#define device_create_file_fan(client, num) \
+ device_create_file(&client->dev, &dev_attr_fan##num##_input)
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind);
+
+static int smsc47b397_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_detect(adapter, &addr_data, smsc47b397_detect);
+}
+
+static int smsc47b397_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev, "Client deregistration failed, "
+ "client not detached.\n");
+ return err;
+ }
+
+ release_region(client->addr, SMSC_EXTENT);
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static struct i2c_driver smsc47b397_driver = {
+ .owner = THIS_MODULE,
+ .name = "smsc47b397",
+ .id = I2C_DRIVERID_SMSC47B397,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = smsc47b397_attach_adapter,
+ .detach_client = smsc47b397_detach_client,
+};
+
+static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind)
+{
+ struct i2c_client *new_client;
+ struct smsc47b397_data *data;
+ int err = 0;
+
+ if (!i2c_is_isa_adapter(adapter)) {
+ return 0;
+ }
+
+ if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) {
+ dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr);
+ return -EBUSY;
+ }
+
+ if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto error_release;
+ }
+ memset(data, 0x00, sizeof(struct smsc47b397_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = addr;
+ init_MUTEX(&data->lock);
+ new_client->adapter = adapter;
+ new_client->driver = &smsc47b397_driver;
+ new_client->flags = 0;
+
+ strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE);
+
+ init_MUTEX(&data->update_lock);
+
+ if ((err = i2c_attach_client(new_client)))
+ goto error_free;
+
+ device_create_file_temp(new_client, 1);
+ device_create_file_temp(new_client, 2);
+ device_create_file_temp(new_client, 3);
+ device_create_file_temp(new_client, 4);
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ device_create_file_fan(new_client, 3);
+ device_create_file_fan(new_client, 4);
+
+ return 0;
+
+error_free:
+ kfree(new_client);
+error_release:
+ release_region(addr, SMSC_EXTENT);
+ return err;
+}
+
+static int __init smsc47b397_find(unsigned int *addr)
+{
+ u8 id, rev;
+
+ superio_enter();
+ id = superio_inb(SUPERIO_REG_DEVID);
+
+ if (id != 0x6f) {
+ superio_exit();
+ return -ENODEV;
+ }
+
+ rev = superio_inb(SUPERIO_REG_DEVREV);
+
+ superio_select(SUPERIO_REG_LD8);
+ *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
+ | superio_inb(SUPERIO_REG_BASE_LSB);
+
+ printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
+ "(base address 0x%04x, revision %u)\n", *addr, rev);
+
+ superio_exit();
+ return 0;
+}
+
+static int __init smsc47b397_init(void)
+{
+ int ret;
+
+ if ((ret = smsc47b397_find(normal_isa)))
+ return ret;
+
+ return i2c_add_driver(&smsc47b397_driver);
+}
+
+static void __exit smsc47b397_exit(void)
+{
+ i2c_del_driver(&smsc47b397_driver);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("SMSC LPC47B397 driver");
+MODULE_LICENSE("GPL");
+
+module_init(smsc47b397_init);
+module_exit(smsc47b397_exit);
diff -Nru a/include/linux/i2c-id.h b/include/linux/i2c-id.h
--- a/include/linux/i2c-id.h 2005-01-07 14:53:44 -08:00
+++ b/include/linux/i2c-id.h 2005-01-07 14:53:44 -08:00
@@ -167,6 +167,7 @@
#define I2C_DRIVERID_ASB100 1043
#define I2C_DRIVERID_FSCHER 1046
#define I2C_DRIVERID_W83L785TS 1047
+#define I2C_DRIVERID_SMSC47B397 1050
/*
* ---- Adapter types ----------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/