Re: [PATCH] USB and Driver Core patches for 2.6.10
From: Greg KH
Date: Sat Jan 08 2005 - 02:49:31 EST
ChangeSet 1.1938.446.7, 2004/12/15 14:47:29-08:00, greg@xxxxxxxxx
USB: delete the tiglusb driver as it's not needed
You can use a userspace program and libusb instead. The author asked for
this driver to be removed because of this.
Signed-off-by: Greg Kroah-Hartman <greg@xxxxxxxxx>
drivers/usb/misc/tiglusb.c | 592 ---------------------------------------------
drivers/usb/misc/tiglusb.h | 43 ---
drivers/usb/Makefile | 1
drivers/usb/misc/Kconfig | 20 -
drivers/usb/misc/Makefile | 1
5 files changed, 657 deletions(-)
diff -Nru a/drivers/usb/Makefile b/drivers/usb/Makefile
--- a/drivers/usb/Makefile 2005-01-07 15:50:39 -08:00
+++ b/drivers/usb/Makefile 2005-01-07 15:50:39 -08:00
@@ -65,7 +65,6 @@
obj-$(CONFIG_USB_LEGOTOWER) += misc/
obj-$(CONFIG_USB_RIO500) += misc/
obj-$(CONFIG_USB_TEST) += misc/
-obj-$(CONFIG_USB_TIGL) += misc/
obj-$(CONFIG_USB_USS720) += misc/
obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
diff -Nru a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
--- a/drivers/usb/misc/Kconfig 2005-01-07 15:50:39 -08:00
+++ b/drivers/usb/misc/Kconfig 2005-01-07 15:50:39 -08:00
@@ -32,26 +32,6 @@
To compile this driver as a module, choose M here: the
module will be called emi26.
-config USB_TIGL
- tristate "Texas Instruments Graph Link USB (aka SilverLink) cable support"
- depends on USB
- ---help---
- If you own a Texas Instruments graphing calculator and use a
- TI-GRAPH LINK USB cable (aka SilverLink), then you might be
- interested in this driver.
-
- If you enable this driver, you will be able to communicate with
- your calculator through a set of device nodes under /dev.
-
- To compile this driver as a module, choose M here: the
- module will be called tiglusb.
-
- If you don't know what the SilverLink cable is or what a Texas
- Instruments graphing calculator is, then you probably don't need this
- driver.
-
- If unsure, say N.
-
config USB_AUERSWALD
tristate "USB Auerswald ISDN support (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
diff -Nru a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
--- a/drivers/usb/misc/Makefile 2005-01-07 15:50:39 -08:00
+++ b/drivers/usb/misc/Makefile 2005-01-07 15:50:39 -08:00
@@ -14,5 +14,4 @@
obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o
obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TEST) += usbtest.o
-obj-$(CONFIG_USB_TIGL) += tiglusb.o
obj-$(CONFIG_USB_USS720) += uss720.o
diff -Nru a/drivers/usb/misc/tiglusb.c b/drivers/usb/misc/tiglusb.c
--- a/drivers/usb/misc/tiglusb.c 2005-01-07 15:50:39 -08:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,592 +0,0 @@
-/* Hey EMACS -*- linux-c -*-
- *
- * tiglusb -- Texas Instruments' USB GraphLink (aka SilverLink) driver.
- * Target: Texas Instruments graphing calculators (http://lpg.ticalc.org).
- *
- * Copyright (C) 2001-2004:
- * Romain Lievin <roms@xxxxxxxxx>
- * Julien BLACHE <jb@xxxxxxxxxxxxxxxx>
- * under the terms of the GNU General Public License.
- *
- * Based on dabusb.c, printer.c & scanner.c
- *
- * Please see the file: Documentation/usb/silverlink.txt
- * and the website at: http://lpg.ticalc.org/prj_usb/
- * for more info.
- *
- * History:
- * 1.0x, Romain & Julien: initial submit.
- * 1.03, Greg Kroah: modifications.
- * 1.04, Julien: clean-up & fixes; Romain: 2.4 backport.
- * 1.05, Randy Dunlap: bug fix with the timeout parameter (divide-by-zero).
- * 1.06, Romain: synched with 2.5, version/firmware changed (confusing).
- * 1.07, Romain: fixed bad use of usb_clear_halt (invalid argument);
- * timeout argument checked in ioctl + clean-up.
- * 1.08, Romain: added support of USB port embedded on some TI's handhelds.
- */
-
-#include <linux/module.h>
-#include <linux/socket.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/usb.h>
-#include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
-#include <linux/device.h>
-
-#include <linux/ticable.h>
-#include "tiglusb.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "1.08"
-#define DRIVER_AUTHOR "Romain Lievin <roms@xxxxxxxxx> & Julien Blache <jb@xxxxxxxxxxx>"
-#define DRIVER_DESC "TI-GRAPH LINK USB (aka SilverLink) driver"
-#define DRIVER_LICENSE "GPL"
-
-/* ----- global variables --------------------------------------------- */
-
-static tiglusb_t tiglusb[MAXTIGL];
-static int timeout = TIMAXTIME; /* timeout in tenth of seconds */
-static struct class_simple *tiglusb_class;
-
-/*---------- misc functions ------------------------------------------- */
-
-/*
- * Re-initialize device
- */
-static inline int
-clear_device (struct usb_device *dev)
-{
- if (usb_reset_configuration (dev) < 0) {
- err ("clear_device failed");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Clear input & output pipes (endpoints)
- */
-static inline int
-clear_pipes (struct usb_device *dev)
-{
- unsigned int pipe;
-
- pipe = usb_sndbulkpipe (dev, 2);
- if (usb_clear_halt (dev, pipe)) {
- err ("clear_pipe (w), request failed");
- return -1;
- }
-
- pipe = usb_rcvbulkpipe (dev, 1);
- if (usb_clear_halt (dev, pipe)) {
- err ("clear_pipe (r), request failed");
- return -1;
- }
-
- return 0;
-}
-
-/* ----- file operations functions--------------------------------------- */
-
-static int
-tiglusb_open (struct inode *inode, struct file *filp)
-{
- int devnum = iminor(inode);
- ptiglusb_t s;
-
- if (devnum < TIUSB_MINOR || devnum >= (TIUSB_MINOR + MAXTIGL))
- return -EIO;
-
- s = &tiglusb[devnum - TIUSB_MINOR];
-
- if (down_interruptible (&s->mutex)) {
- return -ERESTARTSYS;
- }
-
- while (!s->dev || s->opened) {
- up (&s->mutex);
-
- if (filp->f_flags & O_NONBLOCK) {
- return -EBUSY;
- }
-
- msleep_interruptible(500);
-
- if (signal_pending (current)) {
- return -EAGAIN;
- }
-
- if (down_interruptible (&s->mutex)) {
- return -ERESTARTSYS;
- }
- }
-
- s->opened = 1;
- up (&s->mutex);
-
- filp->f_pos = 0;
- filp->private_data = s;
-
- return nonseekable_open(inode, filp);
-}
-
-static int
-tiglusb_release (struct inode *inode, struct file *filp)
-{
- ptiglusb_t s = (ptiglusb_t) filp->private_data;
-
- if (down_interruptible (&s->mutex)) {
- return -ERESTARTSYS;
- }
-
- s->state = _stopped;
- up (&s->mutex);
-
- if (!s->remove_pending)
- clear_device (s->dev);
- else
- wake_up (&s->remove_ok);
-
- s->opened = 0;
-
- return 0;
-}
-
-static ssize_t
-tiglusb_read (struct file *filp, char __user *buf, size_t count, loff_t * f_pos)
-{
- ptiglusb_t s = (ptiglusb_t) filp->private_data;
- ssize_t ret = 0;
- int bytes_to_read = 0;
- int bytes_read = 0;
- int result = 0;
- char *buffer;
- unsigned int pipe;
-
- if (*f_pos)
- return -ESPIPE;
-
- if (s->remove_pending)
- return -EIO;
-
- if (!s->dev)
- return -EIO;
-
- buffer = kmalloc (s->max_ps, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- bytes_to_read = (count >= s->max_ps) ? s->max_ps : count;
-
- pipe = usb_rcvbulkpipe (s->dev, 1);
- result = usb_bulk_msg (s->dev, pipe, buffer, bytes_to_read,
- &bytes_read, (HZ * timeout) / 10);
- if (result == -ETIMEDOUT) { /* NAK */
- if (!bytes_read)
- dbg ("quirk !");
- warn ("tiglusb_read, NAK received.");
- ret = result;
- goto out;
- } else if (result == -EPIPE) { /* STALL -- shouldn't happen */
- warn ("clear_halt request to remove STALL condition.");
- if (usb_clear_halt (s->dev, pipe))
- err ("clear_halt, request failed");
- clear_device (s->dev);
- ret = result;
- goto out;
- } else if (result < 0) { /* We should not get any I/O errors */
- err ("funky result: %d. Please notify maintainer.", result);
- ret = -EIO;
- goto out;
- }
-
- if (copy_to_user (buf, buffer, bytes_read)) {
- ret = -EFAULT;
- }
-
- out:
- kfree(buffer);
- return ret ? ret : bytes_read;
-}
-
-static ssize_t
-tiglusb_write (struct file *filp, const char __user *buf, size_t count, loff_t * f_pos)
-{
- ptiglusb_t s = (ptiglusb_t) filp->private_data;
- ssize_t ret = 0;
- int bytes_to_write = 0;
- int bytes_written = 0;
- int result = 0;
- char *buffer;
- unsigned int pipe;
-
- if (*f_pos)
- return -ESPIPE;
-
- if (s->remove_pending)
- return -EIO;
-
- if (!s->dev)
- return -EIO;
-
- buffer = kmalloc (s->max_ps, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- bytes_to_write = (count >= s->max_ps) ? s->max_ps : count;
- if (copy_from_user (buffer, buf, bytes_to_write)) {
- ret = -EFAULT;
- goto out;
- }
-
- pipe = usb_sndbulkpipe (s->dev, 2);
- result = usb_bulk_msg (s->dev, pipe, buffer, bytes_to_write,
- &bytes_written, (HZ * timeout) / 10);
-
- if (result == -ETIMEDOUT) { /* NAK */
- warn ("tiglusb_write, NAK received.");
- ret = result;
- goto out;
- } else if (result == -EPIPE) { /* STALL -- shouldn't happen */
- warn ("clear_halt request to remove STALL condition.");
- if (usb_clear_halt (s->dev, pipe))
- err ("clear_halt, request failed");
- clear_device (s->dev);
- ret = result;
- goto out;
- } else if (result < 0) { /* We should not get any I/O errors */
- warn ("funky result: %d. Please notify maintainer.", result);
- ret = -EIO;
- goto out;
- }
-
- if (bytes_written != bytes_to_write) {
- ret = -EIO;
- }
-
- out:
- kfree(buffer);
- return ret ? ret : bytes_written;
-}
-
-static int
-tiglusb_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- ptiglusb_t s = (ptiglusb_t) filp->private_data;
- int ret = 0;
-
- if (s->remove_pending)
- return -EIO;
-
- if (down_interruptible (&s->mutex)) {
- return -ERESTARTSYS;
- }
-
- if (!s->dev) {
- up (&s->mutex);
- return -EIO;
- }
-
- switch (cmd) {
- case IOCTL_TIUSB_TIMEOUT:
- if (arg > 0)
- timeout = arg;
- else
- ret = -EINVAL;
- break;
- case IOCTL_TIUSB_RESET_DEVICE:
- if (clear_device (s->dev))
- ret = -EIO;
- break;
- case IOCTL_TIUSB_RESET_PIPES:
- if (clear_pipes (s->dev))
- ret = -EIO;
- break;
- case IOCTL_TIUSB_GET_MAXPS:
- if (copy_to_user((int __user *) arg, &s->max_ps, sizeof(int)))
- return -EFAULT;
- break;
- case IOCTL_TIUSB_GET_DEVID:
- if (copy_to_user((int __user *) arg, &s->dev->descriptor.idProduct,
- sizeof(int)))
- return -EFAULT;
- break;
- default:
- ret = -ENOTTY;
- break;
- }
-
- up (&s->mutex);
-
- return ret;
-}
-
-/* ----- kernel module registering ------------------------------------ */
-
-static struct file_operations tiglusb_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .read = tiglusb_read,
- .write = tiglusb_write,
- .ioctl = tiglusb_ioctl,
- .open = tiglusb_open,
- .release = tiglusb_release,
-};
-
-/* --- initialisation code ------------------------------------- */
-
-static int
-tiglusb_probe (struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- int minor = -1;
- int i, err = 0;
- ptiglusb_t s;
- struct usb_host_config *conf;
- struct usb_host_interface *ifdata = NULL;
- int max_ps;
-
- dbg ("probing vendor id 0x%x, device id 0x%x",
- dev->descriptor.idVendor, dev->descriptor.idProduct);
-
- /*
- * We don't handle multiple configurations. As of version 0x0103 of
- * the TIGL hardware, there's only 1 configuration.
- */
-
- if (dev->descriptor.bNumConfigurations != 1) {
- err = -ENODEV;
- goto out;
- }
-
- if (dev->descriptor.idVendor != 0x451) {
- err = -ENODEV;
- goto out;
- }
-
- if ((dev->descriptor.idProduct != 0xe001) &&
- (dev->descriptor.idProduct != 0xe004) &&
- (dev->descriptor.idProduct != 0xe008)) {
- err = -ENODEV;
- goto out;
- }
-
- /*
- * TI introduced some new handhelds with embedded USB port.
- * Port advertises same config as SilverLink cable but with a
- * different maximum packet size (64 rather than 32).
- */
-
- conf = dev->actconfig;
- ifdata = conf->interface[0]->cur_altsetting;
- max_ps = ifdata->endpoint[0].desc.wMaxPacketSize;
-
- info("max packet size of %d/%d bytes\n",
- ifdata->endpoint[0].desc.wMaxPacketSize,
- ifdata->endpoint[1].desc.wMaxPacketSize);
-
- /*
- * Find a tiglusb struct
- */
- for (i = 0; i < MAXTIGL; i++) {
- ptiglusb_t s = &tiglusb[i];
- if (!s->dev) {
- minor = i;
- break;
- }
- }
-
- if (minor == -1) {
- err = -ENODEV;
- goto out;
- }
-
- s = &tiglusb[minor];
-
- down (&s->mutex);
- s->remove_pending = 0;
- s->dev = dev;
- s->max_ps = max_ps;
- up (&s->mutex);
- dbg ("bound to interface");
-
- class_simple_device_add(tiglusb_class, MKDEV(TIUSB_MAJOR, TIUSB_MINOR + s->minor),
- NULL, "usb%d", s->minor);
- err = devfs_mk_cdev(MKDEV(TIUSB_MAJOR, TIUSB_MINOR) + s->minor,
- S_IFCHR | S_IRUGO | S_IWUGO,
- "ticables/usb/%d", s->minor);
-
- if (err)
- goto out_class;
-
- /* Display firmware version */
- info ("firmware revision %i.%02x",
- dev->descriptor.bcdDevice >> 8,
- dev->descriptor.bcdDevice & 0xff);
-
- usb_set_intfdata (intf, s);
- err = 0;
- goto out;
-
-out_class:
- class_simple_device_remove(MKDEV(TIUSB_MAJOR, TIUSB_MINOR + s->minor));
-out:
- return err;
-}
-
-static void
-tiglusb_disconnect (struct usb_interface *intf)
-{
- wait_queue_t __wait;
- ptiglusb_t s = usb_get_intfdata (intf);
-
- init_waitqueue_entry(&__wait, current);
-
-
- usb_set_intfdata (intf, NULL);
- if (!s || !s->dev) {
- info ("bogus disconnect");
- return;
- }
-
- s->remove_pending = 1;
- wake_up (&s->wait);
- add_wait_queue(&s->wait, &__wait);
- set_current_state(TASK_UNINTERRUPTIBLE);
- if (s->state == _started)
- schedule();
- current->state = TASK_RUNNING;
- remove_wait_queue(&s->wait, &__wait);
- down (&s->mutex);
- s->dev = NULL;
- s->opened = 0;
-
- class_simple_device_remove(MKDEV(TIUSB_MAJOR, TIUSB_MINOR + s->minor));
- devfs_remove("ticables/usb/%d", s->minor);
-
- info ("device %d removed", s->minor);
-
- up (&s->mutex);
-}
-
-static struct usb_device_id tiglusb_ids[] = {
- {USB_DEVICE (0x0451, 0xe001)},
- {}
-};
-
-MODULE_DEVICE_TABLE (usb, tiglusb_ids);
-
-static struct usb_driver tiglusb_driver = {
- .owner = THIS_MODULE,
- .name = "tiglusb",
- .probe = tiglusb_probe,
- .disconnect = tiglusb_disconnect,
- .id_table = tiglusb_ids,
-};
-
-/* --- initialisation code ------------------------------------- */
-
-#ifndef MODULE
-/*
- * You can use 'tiusb=timeout' to set timeout.
- */
-static int __init
-tiglusb_setup (char *str)
-{
- int ints[2];
-
- str = get_options (str, ARRAY_SIZE (ints), ints);
-
- if (ints[0] > 0) {
- if (ints[1] > 0)
- timeout = ints[1];
- else
- info ("tiglusb: wrong timeout value (0), using default value.");
- }
-
- return 1;
-}
-#endif
-
-static int __init
-tiglusb_init (void)
-{
- unsigned u;
- int result, err = 0;
-
- /* initialize struct */
- for (u = 0; u < MAXTIGL; u++) {
- ptiglusb_t s = &tiglusb[u];
- memset (s, 0, sizeof (tiglusb_t));
- init_MUTEX (&s->mutex);
- s->dev = NULL;
- s->minor = u;
- s->opened = 0;
- init_waitqueue_head (&s->wait);
- init_waitqueue_head (&s->remove_ok);
- }
-
- /* register device */
- if (register_chrdev (TIUSB_MAJOR, "tiglusb", &tiglusb_fops)) {
- err ("unable to get major %d", TIUSB_MAJOR);
- err = -EIO;
- goto out;
- }
-
- /* Use devfs, tree: /dev/ticables/usb/[0..3] */
- devfs_mk_dir ("ticables/usb");
-
- tiglusb_class = class_simple_create(THIS_MODULE, "tiglusb");
- if (IS_ERR(tiglusb_class)) {
- err = PTR_ERR(tiglusb_class);
- goto out_chrdev;
- }
- /* register USB module */
- result = usb_register (&tiglusb_driver);
- if (result < 0) {
- err = -1;
- goto out_chrdev;
- }
-
- info (DRIVER_DESC ", version " DRIVER_VERSION);
-
- err = 0;
- goto out;
-
-out_chrdev:
- unregister_chrdev (TIUSB_MAJOR, "tiglusb");
-out:
- return err;
-}
-
-static void __exit
-tiglusb_cleanup (void)
-{
- usb_deregister (&tiglusb_driver);
- class_simple_destroy(tiglusb_class);
- devfs_remove("ticables/usb");
- unregister_chrdev (TIUSB_MAJOR, "tiglusb");
-}
-
-/* --------------------------------------------------------------------- */
-
-__setup ("tiusb=", tiglusb_setup);
-module_init (tiglusb_init);
-module_exit (tiglusb_cleanup);
-
-MODULE_AUTHOR (DRIVER_AUTHOR);
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE (DRIVER_LICENSE);
-
-module_param(timeout, int, 0);
-MODULE_PARM_DESC (timeout, "Timeout in tenths of seconds (default=1.5 seconds)");
-
-/* --------------------------------------------------------------------- */
diff -Nru a/drivers/usb/misc/tiglusb.h b/drivers/usb/misc/tiglusb.h
--- a/drivers/usb/misc/tiglusb.h 2005-01-07 15:50:39 -08:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,43 +0,0 @@
-/* Hey EMACS -*- linux-c -*-
- *
- * tiglusb - low level driver for SilverLink cable
- *
- * Copyright (C) 2000-2002, Romain Lievin <roms@xxxxxxxxxxxxxx>
- * under the terms of the GNU General Public License.
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- */
-
-#ifndef _TIGLUSB_H
-#define _TIGLUSB_H
-
-/*
- * Max. number of devices supported
- */
-#define MAXTIGL 16
-
-/*
- * The driver context...
- */
-
-typedef enum { _stopped=0, _started } driver_state_t;
-
-typedef struct
-{
- struct usb_device *dev; /* USB device handle */
- struct semaphore mutex; /* locks this struct */
-
- wait_queue_head_t wait; /* for timed waits */
- wait_queue_head_t remove_ok;
-
- int minor; /* which minor dev #? */
-
- driver_state_t state; /* started/stopped */
- int opened; /* tru if open */
- int remove_pending;
-
- int max_ps; /* max packet size */
-} tiglusb_t, *ptiglusb_t;
-
-#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/