Re: [PATCH] USB and Driver Core patches for 2.6.10
From: Greg KH
Date: Sat Jan 08 2005 - 01:16:13 EST
ChangeSet 1.1938.446.38, 2004/12/17 16:11:38-08:00, zaitcev@xxxxxxxxxx
[PATCH] Clean mct_u232 in 2.6.10-rc2
I would like to clean up mct_u232 a little bit, although primarily to make
my fixes to 2.4 branch look better. The attached patch does this:
- zeroes whole private structure
- zaps dangling pointer (or why do we check it then)
- removes unused code for FIX_WRITE_RETURN_CODE_PROBLEM
- changes version
- makes the diagnostic name not quite as pompous
- makes debugging printouts a little more informative
From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <greg@xxxxxxxxx>
drivers/usb/serial/mct_u232.c | 148 +++---------------------------------------
1 files changed, 12 insertions(+), 136 deletions(-)
diff -Nru a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
--- a/drivers/usb/serial/mct_u232.c 2005-01-07 15:44:27 -08:00
+++ b/drivers/usb/serial/mct_u232.c 2005-01-07 15:44:27 -08:00
@@ -82,21 +82,10 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "z2.0" /* Linux in-kernel version */
#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@xxxxxx>"
#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
-/*
- * Some not properly written applications do not handle the return code of
- * write() correctly. This can result in character losses. A work-a-round
- * can be compiled in with the following definition. This work-a-round
- * should _NOT_ be part of an 'official' kernel release, of course!
- */
-#undef FIX_WRITE_RETURN_CODE_PROBLEM
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-static int write_blocking; /* disabled by default */
-#endif
-
static int debug;
/*
@@ -108,12 +97,6 @@
struct file *filp);
static void mct_u232_close (struct usb_serial_port *port,
struct file *filp);
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-static int mct_u232_write (struct usb_serial_port *port,
- const unsigned char *buf,
- int count);
-static void mct_u232_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-#endif
static void mct_u232_read_int_callback (struct urb *urb, struct pt_regs *regs);
static void mct_u232_set_termios (struct usb_serial_port *port,
struct termios * old);
@@ -151,7 +134,7 @@
static struct usb_serial_device_type mct_u232_device = {
.owner = THIS_MODULE,
- .name = "Magic Control Technology USB-RS232",
+ .name = "MCT U232",
.short_name = "mct_u232",
.id_table = id_table_combined,
.num_interrupt_in = 2,
@@ -160,10 +143,6 @@
.num_ports = 1,
.open = mct_u232_open,
.close = mct_u232_close,
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
- .write = mct_u232_write,
- .write_bulk_callback = mct_u232_write_bulk_callback,
-#endif
.read_int_callback = mct_u232_read_int_callback,
.ioctl = mct_u232_ioctl,
.set_termios = mct_u232_set_termios,
@@ -366,15 +345,11 @@
struct mct_u232_private *priv;
struct usb_serial_port *port, *rport;
- /* allocate the private data structure */
priv = kmalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- /* set initial values for control structures */
+ memset(priv, 0, sizeof(struct mct_u232_private));
spin_lock_init(&priv->lock);
- priv->control_state = 0;
- priv->last_lsr = 0;
- priv->last_msr = 0;
usb_set_serial_port_data(serial->port[0], priv);
init_waitqueue_head(&serial->port[0]->write_wait);
@@ -404,8 +379,10 @@
for (i=0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
priv = usb_get_serial_port_data(serial->port[i]);
- if (priv)
+ if (priv) {
+ usb_set_serial_port_data(serial->port[i], NULL);
kfree(priv);
+ }
}
} /* mct_u232_shutdown */
@@ -459,14 +436,16 @@
port->read_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (retval) {
- err("usb_submit_urb(read bulk) failed");
+ err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
+ port->read_urb->pipe, retval);
goto exit;
}
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (retval)
- err(" usb_submit_urb(read int) failed");
+ err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
+ port->interrupt_in_urb->pipe, retval);
exit:
return 0;
@@ -486,101 +465,6 @@
} /* mct_u232_close */
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-/* The generic routines work fine otherwise */
-
-static int mct_u232_write (struct usb_serial_port *port,
- const unsigned char *buf, int count)
-{
- struct usb_serial *serial = port->serial;
- int result, bytes_sent, size;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
- return (0);
- }
-
- /* only do something if we have a bulk out endpoint */
- if (!serial->num_bulk_out)
- return(0);
-
- /* another write is still pending? */
- if (port->write_urb->status == -EINPROGRESS) {
- dbg("%s - already writing", __FUNCTION__);
- return (0);
- }
-
- bytes_sent = 0;
- while (count > 0) {
- size = (count > port->bulk_out_size) ? port->bulk_out_size : count;
-
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, size, buf);
-
- memcpy (port->write_urb->transfer_buffer, buf, size);
-
- /* set up our urb */
- usb_fill_bulk_urb(port->write_urb, serial->dev,
- usb_sndbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
- port->write_urb->transfer_buffer, size,
- ((serial->type->write_bulk_callback) ?
- serial->type->write_bulk_callback :
- mct_u232_write_bulk_callback),
- port);
-
- /* send the data out the bulk port */
- result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
- return result;
- }
-
- bytes_sent += size;
- if (write_blocking)
- interruptible_sleep_on(&port->write_wait);
- else
- break;
-
- buf += size;
- count -= size;
- }
-
- return bytes_sent;
-} /* mct_u232_write */
-
-static void mct_u232_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
- struct usb_serial *serial = port->serial;
- struct tty_struct *tty = port->tty;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (!serial) {
- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
- urb->status);
- return;
- }
-
- if (write_blocking) {
- wake_up_interruptible(&port->write_wait);
- tty_wakeup(tty);
- } else {
- /* from generic_write_bulk_callback */
- schedule_work(&port->work);
- }
-
- return;
-} /* mct_u232_write_bulk_callback */
-#endif
-
static void mct_u232_read_int_callback (struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
@@ -591,8 +475,6 @@
int status;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
-
switch (urb->status) {
case 0:
/* success */
@@ -612,7 +494,8 @@
dbg("%s - bad serial pointer, exiting", __FUNCTION__);
return;
}
-
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
/*
@@ -893,12 +776,5 @@
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-module_param(write_blocking, int, 0);
-MODULE_PARM_DESC(write_blocking,
- "The write function will block to write out all data");
-#endif
-
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/