Re: Ho ho ho - Linux v2.6.10
From: Paul Blazejowski
Date: Sat Dec 25 2004 - 23:17:04 EST
Ho ho ho, my NFS is no go!
NFS needs some symbols here and SCSI prints DV failed to configure device.
Merry Christmas
Linux version 2.6.10 (root@blaze) (gcc version 3.3.4) #1 Sat Dec 25
01:00:12 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f53c0
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f6df0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Slackware ro root=801
video=vesafb:ywrap,mtrr,vram:128 console=ttyS0,57600n8 console=tty0
rootflags=quota
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0435000 soft=c0434000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2204.891 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035260k/1048512k available (2252k kernel code, 12664k
reserved, 804k data, 196k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4358.14 BogoMIPS (lpj=2179072)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@xxxxxx
** so I can fix the driver.
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7680k,
total 16384k
vesafb: mode is 1280x1024x24, linelength=3840, pages=3
vesafb: protected mode interface info at c000:581c
vesafb: pmi: set display start = c00c58b0, set palette = c00c58fc
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD300BB-00AUA1, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 58631231 sectors (30019 MB)
native capacity is 58633344 sectors (30020 MB)
hda: Host Protected Area disabled.
hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 18 (level, high) -> IRQ 18
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
(scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
scsi0:A:6:0: DV failed to configure device. Please file a bug report
against this driver.
Vendor: PLEXTOR Model: CD-ROM PX-40TW Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
Vendor: IBM Model: DDYS-T36950N Rev: S80D
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:6:0: Tagged Queuing enabled. Depth 32
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 17 (level, high) -> IRQ 17
Found Controller: IT8212 UDMA/ATA133 RAID Controller
FindDevices: device 0 is IDE
Channel[0] BM-DMA at 0x9800-0x9807
Channel[1] BM-DMA at 0x9808-0x980F
scsi1 : ITE RAIDExpress133
Vendor: ITE Model: IT8212F Rev: 1.45
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
SCSI device sdb: 468883200 512-byte hdwr sectors (240068 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
RAMDISK: Couldn't find valid RAM disk image starting at 0.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 196k freed
Adding 248968k swap on /dev/sda7. Priority:-1 extents:1
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
XFS mounting filesystem sda5
Ending clean XFS mount for filesystem: sda5
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 16 (level, high) -> IRQ 16
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
MMIO=[e6084000-e60847ff] Max Packet=[2048]
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49646 usecs
intel8x0: clocking to 47502
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci1394: fw-host0: SelfID received outside of bus reset sequence
eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:04.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ieee1394: Host added: ID:BUS[0-00:1023] GUID[8a1cc7ffff0020ed]
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 22, pci mem 0xe6083000
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
eth1394: $Rev: 1224 $ Ben Collins <bcollins@xxxxxxxxxx>
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 21, pci mem 0xe6087000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 20, pci mem 0xe6082000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
ohci_hcd 0000:00:02.1: wakeup
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xb0000000
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-2: new full speed USB device using ohci_hcd and address 3
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 3 ports detected
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM)] on usb-0000:00:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 2-2.1: new low speed USB device using ohci_hcd and address 4
input: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on
usb-0000:00:02.0-2.1
input: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on
usb-0000:00:02.0-2.1
USB Universal Host Controller Interface driver v2.2
lockd: Unknown symbol svc_wake_up
lockd: Unknown symbol xdr_decode_string_inplace
lockd: Unknown symbol svc_recv
lockd: Unknown symbol svc_exit_thread
lockd: Unknown symbol xdr_encode_netobj
lockd: Unknown symbol svc_process
lockd: Unknown symbol xprt_set_timeout
lockd: Unknown symbol nlm_debug
lockd: Unknown symbol svc_destroy
lockd: Unknown symbol svc_create
lockd: Unknown symbol rpc_call_sync
lockd: Unknown symbol rpc_delay
lockd: Unknown symbol svc_makesock
lockd: Unknown symbol svc_create_thread
lockd: Unknown symbol rpciod_up
lockd: Unknown symbol xprt_destroy
lockd: Unknown symbol rpciod_down
lockd: Unknown symbol xprt_create_proto
lockd: Unknown symbol rpc_restart_call
lockd: Unknown symbol xdr_encode_string
lockd: Unknown symbol xdr_decode_netobj
lockd: Unknown symbol rpc_call_async
lockd: Unknown symbol rpc_destroy_client
lockd: Unknown symbol rpc_create_client
nfs: Unknown symbol nlmclnt_proc
nfs: Unknown symbol rpc_proc_register
nfs: Unknown symbol rpc_wake_up_task
nfs: Unknown symbol xdr_write_pages
nfs: Unknown symbol rpc_shutdown_client
nfs: Unknown symbol svc_recv
nfs: Unknown symbol xdr_inline_decode
nfs: Unknown symbol rpc_mkpipe
nfs: Unknown symbol lockd_down
nfs: Unknown symbol rpc_wake_up
nfs: Unknown symbol lockd_up
nfs: Unknown symbol xdr_encode_opaque
nfs: Unknown symbol xdr_read_pages
nfs: Unknown symbol xdr_encode_opaque_fixed
nfs: Unknown symbol rpc_sleep_on
nfs: Unknown symbol rpc_init_task
nfs: Unknown symbol xdr_encode_pages
nfs: Unknown symbol rpc_setbufsize
nfs: Unknown symbol rpc_clnt_sigmask
nfs: Unknown symbol rpc_clone_client
nfs: Unknown symbol svc_process
nfs: Unknown symbol xdr_init_decode
nfs: Unknown symbol rpc_proc_unregister
nfs: Unknown symbol svc_destroy
nfs: Unknown symbol svc_create
nfs: Unknown symbol rpc_call_sync
nfs: Unknown symbol rpc_queue_upcall
nfs: Unknown symbol rpc_delay
nfs: Unknown symbol svc_makesock
nfs: Unknown symbol svc_create_thread
nfs: Unknown symbol rpc_execute
nfs: Unknown symbol rpc_killall_tasks
nfs: Unknown symbol rpciod_up
nfs: Unknown symbol xdr_reserve_space
nfs: Unknown symbol xprt_destroy
nfs: Unknown symbol rpc_clnt_sigunmask
nfs: Unknown symbol rpcauth_lookupcred
nfs: Unknown symbol rpciod_down
nfs: Unknown symbol xprt_create_proto
nfs: Unknown symbol rpc_restart_call
nfs: Unknown symbol xdr_inline_pages
nfs: Unknown symbol rpc_call_setup
nfs: Unknown symbol rpc_init_wait_queue
nfs: Unknown symbol put_rpccred
nfs: Unknown symbol rpc_unlink
nfs: Unknown symbol rpc_call_async
nfs: Unknown symbol rpcauth_create
nfs: Unknown symbol xdr_init_encode
nfs: Unknown symbol nfs_debug
nfs: Unknown symbol rpc_create_client
nfs: Unknown symbol xdr_shift_buf
lockd: Unknown symbol svc_wake_up
lockd: Unknown symbol xdr_decode_string_inplace
lockd: Unknown symbol svc_recv
lockd: Unknown symbol svc_exit_thread
lockd: Unknown symbol xdr_encode_netobj
lockd: Unknown symbol svc_process
lockd: Unknown symbol xprt_set_timeout
lockd: Unknown symbol nlm_debug
lockd: Unknown symbol svc_destroy
lockd: Unknown symbol svc_create
lockd: Unknown symbol rpc_call_sync
lockd: Unknown symbol rpc_delay
lockd: Unknown symbol svc_makesock
lockd: Unknown symbol svc_create_thread
lockd: Unknown symbol rpciod_up
lockd: Unknown symbol xprt_destroy
lockd: Unknown symbol rpciod_down
lockd: Unknown symbol xprt_create_proto
lockd: Unknown symbol rpc_restart_call
lockd: Unknown symbol xdr_encode_string
lockd: Unknown symbol xdr_decode_netobj
lockd: Unknown symbol rpc_call_async
lockd: Unknown symbol rpc_destroy_client
lockd: Unknown symbol rpc_create_client
nfs: Unknown symbol nlmclnt_proc
nfs: Unknown symbol rpc_proc_register
nfs: Unknown symbol rpc_wake_up_task
nfs: Unknown symbol xdr_write_pages
nfs: Unknown symbol rpc_shutdown_client
nfs: Unknown symbol svc_recv
nfs: Unknown symbol xdr_inline_decode
nfs: Unknown symbol rpc_mkpipe
nfs: Unknown symbol lockd_down
nfs: Unknown symbol rpc_wake_up
nfs: Unknown symbol lockd_up
nfs: Unknown symbol xdr_encode_opaque
nfs: Unknown symbol xdr_read_pages
nfs: Unknown symbol xdr_encode_opaque_fixed
nfs: Unknown symbol rpc_sleep_on
nfs: Unknown symbol rpc_init_task
nfs: Unknown symbol xdr_encode_pages
nfs: Unknown symbol rpc_setbufsize
nfs: Unknown symbol rpc_clnt_sigmask
nfs: Unknown symbol rpc_clone_client
nfs: Unknown symbol svc_process
nfs: Unknown symbol xdr_init_decode
nfs: Unknown symbol rpc_proc_unregister
nfs: Unknown symbol svc_destroy
nfs: Unknown symbol svc_create
nfs: Unknown symbol rpc_call_sync
nfs: Unknown symbol rpc_queue_upcall
nfs: Unknown symbol rpc_delay
nfs: Unknown symbol svc_makesock
nfs: Unknown symbol svc_create_thread
nfs: Unknown symbol rpc_execute
nfs: Unknown symbol rpc_killall_tasks
nfs: Unknown symbol rpciod_up
nfs: Unknown symbol xdr_reserve_space
nfs: Unknown symbol xprt_destroy
nfs: Unknown symbol rpc_clnt_sigunmask
nfs: Unknown symbol rpcauth_lookupcred
nfs: Unknown symbol rpciod_down
nfs: Unknown symbol xprt_create_proto
nfs: Unknown symbol rpc_restart_call
nfs: Unknown symbol xdr_inline_pages
nfs: Unknown symbol rpc_call_setup
nfs: Unknown symbol rpc_init_wait_queue
nfs: Unknown symbol put_rpccred
nfs: Unknown symbol rpc_unlink
nfs: Unknown symbol rpc_call_async
nfs: Unknown symbol rpcauth_create
nfs: Unknown symbol xdr_init_encode
nfs: Unknown symbol nfs_debug
nfs: Unknown symbol rpc_create_client
nfs: Unknown symbol xdr_shift_buf
--
FreeBSD the Power to Serve!
Attachment:
.config
Description: Binary data