Re: I/O card vs linux
From: Stephen Wille Padnos
Date: Sun Oct 17 2004 - 23:32:34 EST
Gene Heskett wrote:
Greetings;
This may be OT, but can anyone advise me on a pci card thats basicly
an 8255 with a 34 pin or greater port on the card or back panel to
bring out all 3 ports, and a suitable linux compatible driver for it?
3 possibilities: (there are more, including some with industrial
protection, isolation, etc.)
www.computerboards.com : PCI-DIO24 and PCI-DIO24H, $89. These are
basically a single 8255 connected to the bus through a PCI glue chip.
They don't seem to provide a driver, but I would think the board would
be set up automatically by the PCI code, and then there are just the
standard 4 ports to read/write (you just have to find the base address
theough the PCI subsystem).
www.ni.com : NI-PCI-6503, $145. This is a 24 I/O board, but has added
logic (like a programmable power-on I/O state). There don't seem to be
Linux drivers, but they may exist if you ask tech support. (NI is
fairly Linux-friendly - they made a LabView/Linux version).
www.byterunner.com : PCI-1284-P2, $39.95. This is a dual IEEE1284 PCI
parallel port card, with Linux drivers. It's not quite what you're
looking for, but it will give you 24 I/O's (16 bidir, 10 dedicated, 2
interrupts).
Hope this helps
- Steve
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/