Re: 2.6.9-rc2-mm1

From: William Lee Irwin III
Date: Sun Sep 19 2004 - 20:14:58 EST

On Thu, Sep 16, 2004 at 02:40:20AM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc2/2.6.9-rc2-mm1/
> - Added lots of Ingo's low-latency patches
> - Lockmeter doesn't compile. Don't enable CONFIG_LOCKMETER.
> - Several architecture updates

Fails to boot on my Altix. I'm guessing this is some known issue with
some patch, so hopefully one member of the cc: list has heard of it as
I'm a bit late to the game with this release and ia64. Relevant bootlog
diff between 2.6.9-rc1-mm4 and 2.6.9-rc2 indicates some kind of PCI,
qla1280, ia64/Altix IO support, or ACPI IRQ bogon.

Full diff between 2.6.9-rc2-mm1 and 2.6.9-rc1-mm4 bootlogs and complete
bootlog with 2.6.9-rc2-mm1 included as MIME attachments.


-- wli


--- altix.log.54 2004-09-19 17:39:12.000000000 -0700
+++ altix.log.53 2004-09-19 17:33:25.000000000 -0700
@@ -440,111 +524,21 @@
Loading kernel/drivers/scsi/sd_mod.ko
Loading kernel/drivers/ide/pci/sgiioc4.ko
ACPI: PCI interrupt 0000:01:01.0[A]: no GSI
-SGIIOC4: IDE controller at PCI slot 0000:01:01.0, revision 79
-ide0: BM-DMA at 0xc00000080c200140-0xc00000080c200163
-Probing IDE interface ide0...
-hda: MATSHITADVD-ROM SR-8588, ATAPI CD/DVD-ROM drive
-Using deadline io scheduler
-ide0 at 0xc00000080c200100-0xc00000080c200107,0xc00000080c200120 on irq 55
+Failed to enable device SGIIOC4 at slot 0000:01:01.0
Loading kernel/drivers/scsi/qla1280.ko
qla1280: QLA12160 found on PCI bus 1, dev 3
ACPI: PCI interrupt 0000:01:03.0[A]: no GSI
-scsi(0): Enabling SN2 PCI DMA dual channel lockup workaround
-scsi(0): Enabling SN2 PCI DMA workaround
-scsi(0:0): Resetting SCSI BUS
-scsi(0:1): Resetting SCSI BUS
-scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
- Firmware version: 10.04.32, Driver version 3.24.4
- Vendor: SGI Model: ST336753LC Rev: 2741
- Type: Direct-Access ANSI SCSI revision: 03
-scsi(0:0:1:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 255
-SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
-SCSI device sda: drive cache: write through
- sda: sda1 sda2 sda3
-Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
- Vendor: SGI Model: ST336753LC Rev: 2741
- Type: Direct-Access ANSI SCSI revision: 03
-scsi(0:0:2:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 255
-SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
-SCSI device sdb: drive cache: write through
- sdb: sdb1 sdb2 sdb3 sdb4 sdb5
-Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0
+qla1280: Failed to enabled pci device, aborting.
Loading kernel/fs/jbd/jbd.ko
Loading kernel/fs/ext3/ext3.ko
-Waiting for device /dev/sda3 to appear: ok
-rootfs: major=8 minor=3 devn=2051
-warning: can't open /etc/mtab: No such file or directory
-EXT2-fs warning (device sda3): ext2_fill_super: mounting ext3 filesystem as ext2
-
-VFS: Mounted root (ext2 filesystem) readonly.
-Trying to move old root to /initrd ... failed
-Unmounting old root
-Trying to free ramdisk memory ... okay
-Freeing unused kernel memory: 368kB freed
-INIT: version 2.85 booting
-System Boot Control: Running /etc/init.d/boot
-Mounting /proc filesystemdone
-Mounting sysfs on /sysdone
-Mounting /dev/ptsdone
-Configuring serial ports...
-/dev/ttySG0 at 0x0000 (irq = 233) is a 16550A
-Configured serial ports
-doneMounting shared memory FS on /dev/shmdone
-Activating swap-devices in /etc/fstab...
-Adding 1052144k swap on /dev/sda2. Priority:42 extents:1
-Adding 1052160k swap on /dev/sdb2. Priority:42 extents:1
-doneshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
-Checking root file system...
-fsck 1.34 (25-Jul-2003)
-[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3
-/dev/sda3: clean, 473518/4325376 files, 6590955/8644436 blocks
-donemd: Autodetecting RAID arrays.
-md: autorun ...
-md: ... autorun DONE.
-Activating device mapper...
-device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
-Creating /dev/mapper/control character device with major:10 minor:63.
-done
-Scanning for LVM volume groups...
- Reading all physical volumes. This may take a while...
- No volume groups found
-Activating LVM volume groups...
- No volume groups found
-skipped
-showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
-Checking file systems...
-fsck 1.34 (25-Jul-2003)
-Checking all file systems.
-[/sbin/fsck.xfs (1) -- /oracle] fsck.xfs -a /dev/sdb3
-doneSetting updone
-Mounting local file systems...
-proc on /proc type proc (rw)
-tmpfs on /dev/shm type tmpfs (rw)
-devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
-/dev/sda1 on /boot/efi type vfat (rw)
-mount: fs type subfs not supported by kernel
-SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
-XFS mounting filesystem sdb3
-Ending clean XFS mount for filesystem: sdb3
-/dev/sdb3 on /oracle type xfs (rw)
-none on /tmp type tmpfs (rw)
-failedLoading required kernel modules
-doneActivating remaining swap-devices in /etc/fstab...
-doneRestore device permissionsdone
-Setting up the CMOS clockdone
-Setting up timezone datadone
-Setting scheduling timeslices unused
-Setting up hostname 'ca-test21'done
-Setting up loopback interface lo
- lo IP address: 127.0.0.1/8
-done
-Enabling syn flood protectiondone
-Disabling IP forwardingdone
-done
-Creating /var/log/boot.msg
-
+Waiting for device /dev/sda3 to appear: .....not found -- device nodes:
+console fb0 loop0 loop1 loop2 loop3 loop4 loop5 loop6 loop7 md0 null ram ram0 ram1 ram10 ram11 ram12 ram13 ram14 ram15 ram2 ram3 ram4 ram5 ram6 ram7 ram8 ram9 ramdisk tty1 tty2 zero warning: can't open /etc/mtab: No such file or directory
+VFS: Cannot open root device "sda3" or unknown-block(0,0)
+Please append a correct "root=" boot option
+Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
+
telnet> close
Connection closed.
$

-Script done on Sun Sep 19 17:40:18 2004
+Script done on Sun Sep 19 17:34:31 2004

Attachment: altix.diff.bz2
Description: altix.diff.bz2

Attachment: altix.log.53.bz2
Description: altix.log.53.bz2