Re: [PATCH][2.6][2/14] documentation update
From: Michael Hunold
Date: Fri Sep 17 2004 - 09:37:13 EST
- [DVB] add udev.txt which describes how to use dvb and udev/sysfs
- [DVB] add Visionplus VisionDTV USB-Ter DVB-T adapter documentation
- [DVB] update TT USB DEC documentation
- [DVB] update various Kconfig entries
Signed-off-by: Michael Hunold <hunold@xxxxxxxxxxx>
#diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/cards.txt linux-2.6.8.1-patched/Documentation/dvb/cards.txt
--- xx-linux-2.6.8.1/Documentation/dvb/cards.txt 2004-07-19 19:40:45.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/cards.txt 2004-06-21 00:53:32.000000000 +0200
@@ -49,7 +49,7 @@
- "budget" cards (i.e. without hardware MPEG decoder):
- Technotrend Budget / Hauppauge WinTV-Nova PCI Cards
- SATELCO Multimedia PCI
- - KNC1 DVB-S
+ - KNC1 DVB-S, Typhoon DVB-S, Terratec Cinergy 1200 DVB-S (no CI support)
- Typhoon DVB-S budget
- Fujitsu-Siemens Activy DVB-S budget card
diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/contributors.txt linux-2.6.8.1-patched/Documentation/dvb/contributors.txt
--- xx-linux-2.6.8.1/Documentation/dvb/contributors.txt 2004-07-19 19:40:45.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/contributors.txt 2004-05-02 18:30:56.000000000 +0200
@@ -69,6 +69,8 @@
Kenneth Aafløy <ke-aa@xxxxxxxxxx>
for adding support for Typhoon DVB-S budget card
+Ernst Peinlich <e.peinlich@xxxxxxxx>
+ for tuning/DiSEqC support for the DEC 3000-s
(If you think you should be in this list, but you are not, drop a
line to the DVB mailing list)
diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/firmware.txt linux-2.6.8.1-patched/Documentation/dvb/firmware.txt
--- xx-linux-2.6.8.1/Documentation/dvb/firmware.txt 2004-08-23 09:34:29.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/firmware.txt 2004-07-20 22:52:19.000000000 +0200
@@ -2,7 +2,7 @@
binary-only firmware.
The DVB drivers will be converted to use the request_firmware()
-hotplug interface (see Documentation/firmware_class/).
+hotplug interface (see linux/Documentation/firmware_class/).
(CONFIG_FW_LOADER)
The firmware can be loaded automatically via the hotplug manager
@@ -12,18 +12,45 @@
to load their firmwares, so here's just a short list of the
current state:
-- dvb-ttpci: driver uses firmware hotplug interface
+Drivers using the firmware hotplug interface:
+- dvb-ttpci
+- tda1004x:
+
+Proprietary solutions which need to be converted:
- ttusb-budget: firmware is compiled in (dvb-ttusb-dspbootcode.h)
- sp887x: firmware is compiled in (sp887x_firm.h)
- alps_tdlb7: firmware is loaded from path specified by
"mcfile" module parameter; the binary must be
extracted from the Windows driver (Sc_main.mc).
-- tda1004x: firmware is loaded from path specified in
- DVB_TDA1004X_FIRMWARE_FILE kernel config
- variable (default /usr/lib/hotplug/firmware/tda1004x.bin); the
- firmware binary must be extracted from the windows
- driver
- ttusb-dec: see "ttusb-dec.txt" for details
+- vp7041: see vp7041.txt for more information
+
+0) Getting a usable firmware file
+
+- For the dvb-ttpci driver/av7110 card you can download the firmware files from
+http://linuxtv.org/download/dvb/firmware/
+
+Please note that in case of the dvb-ttpci driver this is *not* the "Root"
+file you probably know from the 2.4 DVB releases driver.
+
+The ttpci-firmware utility from linuxtv.org CVS can be used to
+convert Dpram and Root files into a usable firmware image.
+See dvb-kerrnel/scripts/ in http://linuxtv.org/cvs/.
+
+> wget http://www.linuxtv.org/download/dvb/firmware/dvb-ttpci-01.fw-261c
+> mv dvb-ttpci-01.fw-261c /usr/lib/hotplug/firmware/dvb-ttpci-01.fw
+
+- The tda1004x driver needs a copy of the DLL "ttlcdacc.dll" from the Haupauge or Technotrend
+windows driver. Currently the DLL from v2.15a of the technotrend driver is supported. Other versions can
+added reasonably painlessly.
+
+Windows driver URL: http://www.technotrend.de/
+
+> wget http://www.technotrend.de/new/215/TTweb_215a_budget_20_05_2003.zip
+> unzip -j TTweb_215a_budget_20_05_2003.zip Software/Oem/PCI/App/ttlcdacc.dll
+
+Rename "ttlcdacc.dll" to "tda1004x.bin" -- that's currently the default name
+for the firmware file.
1) Automatic firmware loading
@@ -44,8 +71,23 @@
driver/firmware internal API changes (so users are free to install the
latest firmware compatible with the driver).
+Currently the drivers mentionend above support firmware upload through the
+hotplug manager. If you have such a card, a simple "modprobe" of the driver
+will take care of everything, ie.
+
+> modprobe dvb-ttpci
+or
+> modprobe tda1004x
+
+If you have the hotplug firmware scripts installed, both drivers will ask the hotplug
+daemon for their default firmware. If the scripts are there, but the firmware cannot
+be found, an error message will be printed immediately. Make sure that the firmware
+are in a path where the hotplug manager can find them.
+
+Please note that the default firmware name of the tda1004x doesn't follow the
+naming conventions stated above. It's still called "tda1004x.bin".
+
2) Manually loading the firmware into a driver
- (currently only the dvb-ttpci / av7110 driver supports this)
Step a) Mount sysfs-filesystem.
@@ -73,29 +115,17 @@
> echo "180" > /sys/class/firmware/timeout
-Step c) Getting a usable firmware file for the dvb-ttpci driver/av7110 card.
-
-You can download the firmware files from
-http://linuxtv.org/download/dvb/
-
-Please note that in case of the dvb-ttpci driver this is *not* the "Root"
-file you probably know from the 2.4 DVB releases driver.
-
-The ttpci-firmware utility from linuxtv.org CVS can be used to
-convert Dpram and Root files into a usable firmware image.
-See dvb-kerrnel/scripts/ in http://linuxtv.org/cvs/.
-
-> wget http://www.linuxtv.org/download/dvb/dvb-ttpci-01.fw
-gets you the version 01 of the firmware fot the ttpci driver.
-
-Step d) Loading the dvb-ttpci driver and loading the firmware
+Step c) Loading the driver and uploading the firmware manually
"modprobe" will take care that every needed module will be loaded
-automatically (except the frontend driver)
+automatically
> modprobe dvb-ttpci
+or
+> modprobe tda1004x
-The "modprobe" process will hang until
+If you don't have the hotplug subsystem running, the "modprobe" process will
+now hang until
a) you upload the firmware or
b) the timeout occurs.
@@ -107,14 +137,24 @@
drwxr-xr-x 2 root root 0 Jul 29 11:00 0000:03:05.0
-rw-r--r-- 1 root root 0 Jul 29 10:41 timeout
-"0000:03:05.0" is the id for my dvb-c card. It depends on the pci slot,
-so it changes if you plug the card to different slots.
+"0000:03:05.0" is the id of the device that needs an firmware upload.
+
+In this example, this is the pci id of my dvb-c card. It depends on the pci slot,
+so it changes if you plug the card to different slots. For the tda1004x,
+the id will be an artifical number consisting on the i2c bus the device is on.
You can upload the firmware like that:
> export DEVDIR=/sys/class/firmware/0000\:03\:05.0
> echo 1 > $DEVDIR/loading
+
+For the dvb-ttpci card:
> cat dvb-ttpci-01.fw > $DEVDIR/data
+
+For the tda1004x frontend, the path above might be different, but the other things
+are the same:
+> cat tda1004x.bin > $DEVDIR/data
+
> echo 0 > $DEVDIR/loading
That's it. The driver should be up and running now.
diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/readme.txt linux-2.6.8.1-patched/Documentation/dvb/readme.txt
--- xx-linux-2.6.8.1/Documentation/dvb/readme.txt 2004-07-19 19:40:45.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/readme.txt 2004-08-06 13:23:24.000000000 +0200
@@ -41,4 +41,11 @@
various bt8xx based "budget" DVB cards
(Nebula, Pinnacle PCTV, Twinhan DST)
+"vp7041.txt"
+contains detailed informations about the
+Visionplus VisionDTV USB-Ter DVB-T adapter.
+
+"udev.txt"
+how to get DVB and udev up and running.
+
Good luck and have fun!
diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/ttusb-dec.txt linux-2.6.8.1-patched/Documentation/dvb/ttusb-dec.txt
--- xx-linux-2.6.8.1/Documentation/dvb/ttusb-dec.txt 2004-08-23 09:34:29.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/ttusb-dec.txt 2004-05-02 18:30:56.000000000 +0200
@@ -6,6 +6,8 @@
Supported:
DEC2000-t
+ DEC2450-t
+ DEC3000-s
Linux Kernels 2.4 and 2.6
Video Streaming
Audio Streaming
@@ -13,14 +15,11 @@
Channel Zapping
Hotplug firmware loader under 2.6 kernels
-In Progress:
- DEC2540-t
- DEC3000-s
-
To Do:
Tuner status information
DVB network interface
Streaming video PC->DEC
+ Conax support for 2450-t
Getting the Firmware
--------------------
@@ -57,7 +56,7 @@
Hotplug Firmware Loading for 2.6 kernels
----------------------------------------
For 2.6 kernels the firmware is loaded at the point that the driver module is
-loaded. See Documentation/dvb/firmware.txt for more information.
+loaded. See linux/Documentation/dvb/firmware.txt for more information.
mv STB_PC_T.bin /usr/lib/hotplug/firmware/dvb-ttusb-dec-2000t.fw
mv STB_PC_X.bin /usr/lib/hotplug/firmware/dvb-ttusb-dec-2540t.fw
diff -uraNwB xx-linux-2.6.8.1/Documentation/dvb/udev.txt linux-2.6.8.1-patched/Documentation/dvb/udev.txt
--- xx-linux-2.6.8.1/Documentation/dvb/udev.txt 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.8.1-patched/Documentation/dvb/udev.txt 2004-08-11 11:44:45.000000000 +0200
@@ -0,0 +1,46 @@
+The DVB subsystem currently registers to the sysfs subsystem using the
+"class_simple" interface.
+
+This means that only the basic informations like module loading parameters
+are presented through sysfs. Other things that might be interesting are
+currently *not* available.
+
+Nevertheless it's now possible to add proper udev rules so that the
+DVB device nodes are created automatically.
+
+We assume that you have udev already up and running and that have been
+creating the DVB device nodes manually up to now due to the missing sysfs
+support.
+
+0. Don't forget to disable your current method of creating the
+device nodes manually.
+
+1. Unfortunately, you'll need a helper script to transform the kernel
+sysfs device name into the well known dvb adapter / device naming scheme.
+The script should be called "dvb.sh" and should be placed into a script
+dir where udev can execute it, most likely /etc/udev/scripts/
+
+So, create a new file /etc/udev/scripts/dvb.sh and add the following:
+------------------------------schnipp------------------------------------------------
+#!/bin/sh
+/bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,'
+------------------------------schnipp------------------------------------------------
+
+Don't forget to make the script executable with "chmod".
+
+1. You need to create a proper udev rule that will create the device nodes
+like you know them. All real distributions out there scan the /etc/udev/rules.d
+directory for rule files. The main udev configuration file /etc/udev/udev.conf
+will tell you the directory where the rules are, most likely it's /etc/udev/rules.d/
+
+Create a new rule file in that directory called "dvb.rule" and add the following line:
+------------------------------schnipp------------------------------------------------
+KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c"
+------------------------------schnipp------------------------------------------------
+
+If you want more control over the device nodes (for example a special group membership)
+have a look at "man udev".
+
+For every device that registers to the sysfs subsystem with a "dvb" prefix,
+the helper script /etc/udev/scripts/dvb.sh is invoked, which will then
+create the proper device node in your /dev/ directory.
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/avermedia.txt linux-2.6.8.1-patched/Documentation/dvb/avermedia.txt
--- linux-2.6.8.1-dvb1/Documentation/dvb/avermedia.txt 2004-09-15 15:34:48.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/avermedia.txt 2004-09-01 12:18:59.000000000 +0200
@@ -6,7 +6,6 @@
Assumptions and Introduction
The Avermedia DVB-T
Getting the card going
- Getting the Firmware
Receiving DVB-T in Australia
Known Limitations
Further Update
@@ -149,28 +148,9 @@
to start accessing the card with utilities such as scan, tzap,
dvbstream etc.
- The current version of the frontend module sp887x.o, contains
- no firmware drivers?, so the first time you open it with a DVB
- utility the driver will try to download some initial firmware
- to the card. You will need to download this firmware from the
- web, or copy it from an installation of the Windows drivers
- that probably came with your card, before you can use it.
-
- The default Linux filesystem location for this firmware is
- /usr/lib/hotplug/firmware/sc_main.mc .
- _________________________________________________________
-
-Getting the Firmware
-
- As the firmware for the card is no longer contained within the
- driver, it is necessary to extract it from the windows
- drivers.
-
- The Windows drivers for the Avermedia DVB-T can be obtained
- from: http://babyurl.com/H3U970 and you can get an application
- to extract the firmware from:
- http://www.kyz.uklinux.net/cabextract.php.
- _________________________________________________________
+ The frontend module sp887x.o, requires an external firmware.
+ Please use the command "get_dvb_firmware sp887x" to download
+ it. Then copy it to /usr/lib/hotplug/firmware.
Receiving DVB-T in Australia
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/cards.txt linux-2.6.8.1-patched/Documentation/dvb/cards.txt
--- linux-2.6.8.1-dvb1/Documentation/dvb/cards.txt 2004-09-17 12:27:25.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/cards.txt 2004-09-15 10:26:44.000000000 +0200
@@ -38,6 +38,7 @@
Comtech DVBT-6k07 (SP5730 PLL)
(NxtWave Communications NXT6000 demodulator)
- sp887x : Microtune 7202D
+ - dib3000mb : DiBcom 3000-MB Frontend
DVB-S/C/T:
- dst : TwinHan DST Frontend
@@ -66,4 +67,9 @@
- Nova USB
- DEC 2000-T, 3000-S, 2540-T
+o DiBcom DVB-T USB based devices:
+ - Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device
+ - KWorld V-Stream XPERT DTV - DVB-T USB
+ - HAMA DVB-T USB device
+
o Experimental support for the analog module of the Siemens DVB-C PCI card
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/firmware.txt linux-2.6.8.1-patched/Documentation/dvb/firmware.txt
--- linux-2.6.8.1-dvb1/Documentation/dvb/firmware.txt 2004-09-17 12:27:25.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/firmware.txt 2004-09-15 15:36:15.000000000 +0200
@@ -2,7 +2,7 @@
binary-only firmware.
The DVB drivers will be converted to use the request_firmware()
-hotplug interface (see linux/Documentation/firmware_class/).
+hotplug interface (see Documentation/firmware_class/).
(CONFIG_FW_LOADER)
The firmware can be loaded automatically via the hotplug manager
@@ -12,45 +12,18 @@
to load their firmwares, so here's just a short list of the
current state:
-Drivers using the firmware hotplug interface:
-- dvb-ttpci
-- tda1004x:
-
-Proprietary solutions which need to be converted:
+- dvb-ttpci: driver uses firmware hotplug interface
- ttusb-budget: firmware is compiled in (dvb-ttusb-dspbootcode.h)
- sp887x: firmware is compiled in (sp887x_firm.h)
- alps_tdlb7: firmware is loaded from path specified by
"mcfile" module parameter; the binary must be
extracted from the Windows driver (Sc_main.mc).
+- tda1004x: firmware is loaded from path specified in
+ DVB_TDA1004X_FIRMWARE_FILE kernel config
+ variable (default /usr/lib/hotplug/firmware/tda1004x.bin); the
+ firmware binary must be extracted from the windows
+ driver
- ttusb-dec: see "ttusb-dec.txt" for details
-- vp7041: see vp7041.txt for more information
-
-0) Getting a usable firmware file
-
-- For the dvb-ttpci driver/av7110 card you can download the firmware files from
-http://linuxtv.org/download/dvb/firmware/
-
-Please note that in case of the dvb-ttpci driver this is *not* the "Root"
-file you probably know from the 2.4 DVB releases driver.
-
-The ttpci-firmware utility from linuxtv.org CVS can be used to
-convert Dpram and Root files into a usable firmware image.
-See dvb-kerrnel/scripts/ in http://linuxtv.org/cvs/.
-
-> wget http://www.linuxtv.org/download/dvb/firmware/dvb-ttpci-01.fw-261c
-> mv dvb-ttpci-01.fw-261c /usr/lib/hotplug/firmware/dvb-ttpci-01.fw
-
-- The tda1004x driver needs a copy of the DLL "ttlcdacc.dll" from the Haupauge or Technotrend
-windows driver. Currently the DLL from v2.15a of the technotrend driver is supported. Other versions can
-added reasonably painlessly.
-
-Windows driver URL: http://www.technotrend.de/
-
-> wget http://www.technotrend.de/new/215/TTweb_215a_budget_20_05_2003.zip
-> unzip -j TTweb_215a_budget_20_05_2003.zip Software/Oem/PCI/App/ttlcdacc.dll
-
-Rename "ttlcdacc.dll" to "tda1004x.bin" -- that's currently the default name
-for the firmware file.
1) Automatic firmware loading
@@ -71,23 +44,8 @@
driver/firmware internal API changes (so users are free to install the
latest firmware compatible with the driver).
-Currently the drivers mentionend above support firmware upload through the
-hotplug manager. If you have such a card, a simple "modprobe" of the driver
-will take care of everything, ie.
-
-> modprobe dvb-ttpci
-or
-> modprobe tda1004x
-
-If you have the hotplug firmware scripts installed, both drivers will ask the hotplug
-daemon for their default firmware. If the scripts are there, but the firmware cannot
-be found, an error message will be printed immediately. Make sure that the firmware
-are in a path where the hotplug manager can find them.
-
-Please note that the default firmware name of the tda1004x doesn't follow the
-naming conventions stated above. It's still called "tda1004x.bin".
-
2) Manually loading the firmware into a driver
+ (currently only the dvb-ttpci / av7110 driver supports this)
Step a) Mount sysfs-filesystem.
@@ -115,17 +73,29 @@
> echo "180" > /sys/class/firmware/timeout
-Step c) Loading the driver and uploading the firmware manually
+Step c) Getting a usable firmware file for the dvb-ttpci driver/av7110 card.
+
+You can download the firmware files from
+http://linuxtv.org/download/dvb/
+
+Please note that in case of the dvb-ttpci driver this is *not* the "Root"
+file you probably know from the 2.4 DVB releases driver.
+
+The ttpci-firmware utility from linuxtv.org CVS can be used to
+convert Dpram and Root files into a usable firmware image.
+See dvb-kerrnel/scripts/ in http://linuxtv.org/cvs/.
+
+> wget http://www.linuxtv.org/download/dvb/dvb-ttpci-01.fw
+gets you the version 01 of the firmware fot the ttpci driver.
+
+Step d) Loading the dvb-ttpci driver and loading the firmware
"modprobe" will take care that every needed module will be loaded
-automatically
+automatically (except the frontend driver)
> modprobe dvb-ttpci
-or
-> modprobe tda1004x
-If you don't have the hotplug subsystem running, the "modprobe" process will
-now hang until
+The "modprobe" process will hang until
a) you upload the firmware or
b) the timeout occurs.
@@ -137,24 +107,14 @@
drwxr-xr-x 2 root root 0 Jul 29 11:00 0000:03:05.0
-rw-r--r-- 1 root root 0 Jul 29 10:41 timeout
-"0000:03:05.0" is the id of the device that needs an firmware upload.
-
-In this example, this is the pci id of my dvb-c card. It depends on the pci slot,
-so it changes if you plug the card to different slots. For the tda1004x,
-the id will be an artifical number consisting on the i2c bus the device is on.
+"0000:03:05.0" is the id for my dvb-c card. It depends on the pci slot,
+so it changes if you plug the card to different slots.
You can upload the firmware like that:
> export DEVDIR=/sys/class/firmware/0000\:03\:05.0
> echo 1 > $DEVDIR/loading
-
-For the dvb-ttpci card:
> cat dvb-ttpci-01.fw > $DEVDIR/data
-
-For the tda1004x frontend, the path above might be different, but the other things
-are the same:
-> cat tda1004x.bin > $DEVDIR/data
-
> echo 0 > $DEVDIR/loading
That's it. The driver should be up and running now.
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/get_dvb_firmware linux-2.6.8.1-patched/Documentation/dvb/get_dvb_firmware
--- linux-2.6.8.1-dvb1/Documentation/dvb/get_dvb_firmware 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.8.1-patched/Documentation/dvb/get_dvb_firmware 2004-09-15 10:26:44.000000000 +0200
@@ -0,0 +1,339 @@
+#!/usr/bin/perl
+# DVB firmware extractor
+#
+# (c) 2004 Andrew de Quincey
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+use File::Temp qw/ tempdir /;
+use IO::Handle;
+
+@components = ( "alps_tdlb7", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb" );
+
+# Check args
+syntax() if (scalar(@ARGV) != 1);
+$cid = $ARGV[0];
+
+# Do it!
+for($i=0; $i < scalar(@components); $i++) {
+ if ($cid eq $components[$i]) {
+ $outfile = eval($cid);
+ die $@ if $@;
+ print STDERR "Firmware $outfile extracted successfully. Now copy it to /usr/lib/hotplug/firmware/.\n";
+ exit(0);
+ }
+}
+
+# If we get here, it wasn't found
+print STDERR "Unknown component \"$cid\"\n";
+syntax();
+
+
+
+
+# ---------------------------------------------------------------
+# Firmware-specific extraction subroutines
+
+sub alps_tdlb7 {
+ my $sourcefile = "tt_Premium_217g.zip";
+ my $url = "http://www.technotrend.de/new/217g/$sourcefile";;
+ my $hash = "53970ec17a538945a6d8cb608a7b3899";
+ my $outfile = "dvb-fe-tdlb7.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ verify("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $hash);
+ copy("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $outfile);
+
+ $outfile;
+}
+
+sub sp887x {
+ my $sourcefile = "Dvbt1.3.57.6.zip";
+ my $url = "http://www.avermedia.com/software/$sourcefile";;
+ my $cabfile = "DVBT Net Ver1.3.57.6/disk1/data1.cab";
+ my $hash = "237938d53a7f834c05c42b894ca68ac3";
+ my $outfile = "dvb-fe-sp887x.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+ checkunshield();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ unshield("$tmpdir/$cabfile", $tmpdir);
+ verify("$tmpdir/sc_main.mc", $hash);
+ copy("$tmpdir/sc_main.mc", $outfile);
+
+ $outfile;
+}
+
+sub tda10045 {
+ my $sourcefile = "tt_budget_217g.zip";
+ my $url = "http://www.technotrend.de/new/217g/$sourcefile";;
+ my $hash = "2105fd5bf37842fbcdfa4bfd58f3594a";
+ my $outfile = "dvb-fe-tda10045.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x37ef9, 30555, "$tmpdir/fwtmp");
+ verify("$tmpdir/fwtmp", $hash);
+ copy("$tmpdir/fwtmp", $outfile);
+
+ $outfile;
+}
+
+sub tda10046 {
+ my $sourcefile = "tt_budget_217g.zip";
+ my $url = "http://www.technotrend.de/new/217g/$sourcefile";;
+ my $hash = "a25b579e37109af60f4a36c37893957c";
+ my $outfile = "dvb-fe-tda10046.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+ verify("$tmpdir/fwtmp", $hash);
+ copy("$tmpdir/fwtmp", $outfile);
+
+ $outfile;
+}
+
+sub av7110 {
+ my $sourcefile = "dvb-ttpci-01.fw-261c";
+ my $url = "http://www.linuxtv.org/download/dvb/firmware/$sourcefile";;
+ my $hash = "7b263de6b0b92d2347319c65adc7d4fb";
+ my $outfile = "dvb-ttpci-01.fw";
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ verify($sourcefile, $hash);
+ copy($sourcefile, $outfile);
+
+ $outfile;
+}
+
+sub dec2000t {
+ my $sourcefile = "dec217g.exe";
+ my $url = "http://hauppauge.lightpath.net/de/$sourcefile";;
+ my $hash = "bd86f458cee4a8f0a8ce2d20c66215a9";
+ my $outfile = "dvb-ttusb-dec-2000t.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $hash);
+ copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $outfile);
+
+ $outfile;
+}
+
+sub dec2540t {
+ my $sourcefile = "dec217g.exe";
+ my $url = "http://hauppauge.lightpath.net/de/$sourcefile";;
+ my $hash = "53e58f4f5b5c2930beee74a7681fed92";
+ my $outfile = "dvb-ttusb-dec-2540t.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $hash);
+ copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $outfile);
+
+ $outfile;
+}
+
+sub dec3000s {
+ my $sourcefile = "dec217g.exe";
+ my $url = "http://hauppauge.lightpath.net/de/$sourcefile";;
+ my $hash = "b013ececea83f4d6d8d2a29ac7c1b448";
+ my $outfile = "dvb-ttusb-dec-3000s.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $hash);
+ copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $outfile);
+
+ $outfile;
+}
+
+sub vp7041 {
+ my $sourcefile = "2.422.zip";
+ my $url = "http://www.twinhan.com/files/driver/USB-Ter/$sourcefile";;
+ my $hash = "e88c9372d1f66609a3e7b072c53fbcfe";
+ my $outfile = "dvb-vp7041-2.422.fw";
+ my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+ checkstandard();
+
+ wgetfile($sourcefile, $url);
+ unzip($sourcefile, $tmpdir);
+ extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 12503, 3036, "$tmpdir/fwtmp1");
+ extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 2207, 10274, "$tmpdir/fwtmp2");
+
+ my $CMD = "\000\001\000\222\177\000";
+ my $PAD = "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000";
+ my ($FW);
+ open $FW, ">$tmpdir/fwtmp3";
+ print $FW "$CMD\001$PAD";
+ print $FW "$CMD\001$PAD";
+ appendfile($FW, "$tmpdir/fwtmp1");
+ print $FW "$CMD\000$PAD";
+ print $FW "$CMD\001$PAD";
+ appendfile($FW, "$tmpdir/fwtmp2");
+ print $FW "$CMD\001$PAD";
+ print $FW "$CMD\000$PAD";
+ close($FW);
+
+ verify("$tmpdir/fwtmp3", $hash);
+ copy("$tmpdir/fwtmp3", $outfile);
+
+ $outfile;
+}
+
+sub dibusb {
+ my $url = "http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/firmware/dvb-dibusb-5.0.0.11.fw?rev=1.1&content-type=text/plain";;
+ my $outfile = "dvb-dibusb-5.0.0.11.fw";
+ my $hash = "fa490295a527360ca16dcdf3224ca243";
+
+ checkstandard();
+
+ wgetfile($outfile, $url);
+ verify($outfile,$hash);
+
+ $outfile;
+}
+
+# ---------------------------------------------------------------
+# Utilities
+
+sub checkstandard {
+ if (system("which unzip > /dev/null 2>&1")) {
+ die "This firmware requires the unzip command - see ftp://ftp.info-zip.org/pub/infozip/UnZip.html\n";;
+ }
+ if (system("which md5sum > /dev/null 2>&1")) {
+ die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n";;
+ }
+ if (system("which wget > /dev/null 2>&1")) {
+ die "This firmware requires the wget command - see http://wget.sunsite.dk/\n";;
+ }
+}
+
+sub checkunshield {
+ if (system("which unshield > /dev/null 2>&1")) {
+ die "This firmware requires the unshield command - see http://sourceforge.net/projects/synce/\n";;
+ }
+}
+
+sub wgetfile {
+ my ($sourcefile, $url) = @_;
+
+ if (! -f $sourcefile) {
+ system("wget -O \"$sourcefile\" \"$url\"") and die "wget failed - unable to download firmware";
+ }
+}
+
+sub unzip {
+ my ($sourcefile, $todir) = @_;
+
+ $status = system("unzip -q -o -d \"$todir\" \"$sourcefile\" 2>/dev/null" );
+ if ((($status >> 8) > 2) || (($status & 0xff) != 0)) {
+ die ("unzip failed - unable to extract firmware");
+ }
+}
+
+sub unshield {
+ my ($sourcefile, $todir) = @_;
+
+ system("unshield -d \"$todir\" \"$sourcefile\" > /dev/null" ) and die ("unshield failed - unable to extract firmware");
+}
+
+sub verify {
+ my ($filename, $hash) = @_;
+ my ($testhash);
+
+ open(CMD, "md5sum \"$filename\"|");
+ $testhash = <CMD>;
+ $testhash =~ /([a-zA-Z0-9]*)/;
+ $testhash = $1;
+ close CMD;
+ die "Hash of extracted file does not match!\n" if ($testhash ne $hash);
+}
+
+sub copy {
+ my ($from, $to) = @_;
+
+ system("cp -f \"$from\" \"$to\"") and die ("cp failed");
+}
+
+sub extract {
+ my ($infile, $offset, $length, $outfile) = @_;
+ my ($chunklength, $buf, $rcount);
+
+ open INFILE, "<$infile";
+ open OUTFILE, ">$outfile";
+ sysseek(INFILE, $offset, SEEK_SET);
+ while($length > 0) {
+ # Calc chunk size
+ $chunklength = 2048;
+ $chunklength = $length if ($chunklength > $length);
+
+ $rcount = sysread(INFILE, $buf, $chunklength);
+ die "Ran out of data\n" if ($rcount != $chunklength);
+ syswrite(OUTFILE, $buf);
+ $length -= $rcount;
+ }
+ close INFILE;
+ close OUTFILE;
+}
+
+sub appendfile {
+ my ($FH, $infile) = @_;
+ my ($buf);
+
+ open INFILE, "<$infile";
+ while(1) {
+ $rcount = sysread(INFILE, $buf, 2048);
+ last if ($rcount == 0);
+ print $FH $buf;
+ }
+ close(INFILE);
+}
+
+sub syntax() {
+ print STDERR "syntax: get_dvb_firmware <component>\n";
+ print STDERR "Supported components:\n";
+ for($i=0; $i < scalar(@components); $i++) {
+ print STDERR "\t" . $components[$i] . "\n";
+ }
+ exit(1);
+}
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/README.dibusb linux-2.6.8.1-patched/Documentation/dvb/README.dibusb
--- linux-2.6.8.1-dvb1/Documentation/dvb/README.dibusb 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.8.1-patched/Documentation/dvb/README.dibusb 2004-09-17 12:25:15.000000000 +0200
@@ -0,0 +1,152 @@
+Documentation for dib3000mb frontend driver and dibusb device driver
+
+The drivers should work with
+
+- Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device (VP7041)
+ http://www.twinhan.com/visiontv-2_4.htm
+
+- CTS Portable (Chinese Television System)
+ http://www.2cts.tv/ctsportable/
+
+- KWorld V-Stream XPERT DTV - DVB-T USB
+ http://www.kworld.com.tw/asp/pindex.asp?id=4&pid=13
+
+- HAMA DVB-T USB device
+ http://www.hama.de/portal/articleId*110620/action*2598
+
+- DiBcom USB DVB-T reference device
+
+- Ultima Electronic/Artec T1 USB TVBOX
+ http://www.arteceuro.com/products-tvbox.html
+
+
+Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@xxxxxxx),
+
+both drivers based on GPL code, which has
+
+Copyright (C) 2004 Amaury Demol for DiBcom (ademol@xxxxxxxxx)
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, version 2.
+
+
+NEWS:
+ 2004-09-13 - added support for a new device (Artec T1 USB TVBOX), thanks
+ to Christian Motschke for reporting
+ 2004-09-05 - released the dibusb device and dib3000mb-frontend driver
+
+ (old news for vp7041.c)
+ 2004-07-15 - found out, by accident, that the device has a TUA6010XS for
+ frequency generator
+ 2004-07-12 - figured out, that the driver should also work with the
+ CTS Portable (Chinese Television System)
+ 2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
+ properly with firmware extracted from 2.422
+ - #if for 2.6.4 (dvb), compile issue
+ - changed firmware handling, see vp7041.txt sec 1.1
+ 2004-07-02 - some tuner modifications, v0.1, cleanups, first public
+ 2004-06-28 - now using the dvb_dmx_swfilter_packets, everything
+ runs fine now
+ 2004-06-27 - able to watch and switching channels (pre-alpha)
+ - no section filtering yet
+ 2004-06-06 - first TS received, but kernel oops :/
+ 2004-05-14 - firmware loader is working
+ 2004-05-11 - start writing the driver
+
+1. How to use?
+NOTE: This driver was developed using Linux 2.6.6.,
+it is working with 2.6.7, 2.6.8.1.
+
+Linux 2.4.x support is not planned, but patches are very welcome.
+
+NOTE: I'm using Debian testing, so the following explaination (especially
+the hotplug-path) needn't match your system, but probably it will :).
+
+1.1. Firmware
+
+The USB driver needs to download a firmware to start working.
+
+You can either use "get_dvb_firmware dibusb" to download the firmware or you
+can get it directly via
+
+http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/firmware/dvb-dibusb-5.0.0.11.fw?rev=1.1&content-type=text/plain
+
+1.2. Compiling
+
+Since the driver is in the linux kernel, activating the driver in
+your favorite config-environment should sufficient. I recommend
+to compile the driver as module. Hotplug does the rest.
+
+1.3. Loading the drivers
+
+Hotplug is able to load the driver, when it is needed (because you plugged
+in the device).
+
+If you want to enable debug output, you have to load the driver manually.
+
+modprobe dvb-dibusb debug=1
+modprobe dib3000mb debug=1
+
+should do the trick.
+
+When the driver is loaded successfully, the firmware file was in
+the right place and the device is connected, the "Power"-LED should be
+turned on.
+
+At this point you should be able to start a dvb-capable application. For myself
+I used mplayer, dvbscan, tzap and kaxtv, they are working. Using the device
+as a slave device in vdr, was not working for me. Some work has to be done
+(patches and comments are very welcome).
+
+2. Known problems and bugs
+
+TODO:
+- add some additional URBs for USB data transfer
+- due a firmware problem i2c writes during mpeg transfers destroy the stream
+ no i2c writes during streaming, interrupt streaming, when adding another pid
+
+2.1. Adding new devices
+
+It is not possible to determine the range of devices based on the DiBcom
+reference design. This is because the reference design of DiBcom can be sold
+to third persons, without telling DiBcom (so done with the Twinhan VP7041 and
+the HAMA device).
+
+When you think you have a device like this and the driver does not recognizes it,
+please send the ****load.inf and the ****cap.inf of the Windows driver to me.
+
+Sometimes the Vendor or Product ID is identical to the ones of Twinhan, even
+though it is not a Twinhan device (e.g. HAMA), then please send me the name
+of the device. I will add it to this list in order to make this clear to
+others.
+
+If you are familar with C you can also add the VID and PID of the device to
+the dvb-dibusb.[hc]-files and create a patch and send it over to me or to
+the linux-dvb mailing list, _after_ you have tried compiling and modprobing
+it.
+
+2.2. Comments
+
+Patches, comments and suggestions are very very welcome
+
+3. Acknowledgements
+ Amaury Demol (ademol@xxxxxxxxx) and Francois Kanounnikoff from DiBcom for
+ providing specs, code and help, on which the dvb-dibusb and dib3000mb are
+ based.
+
+ Alex Woods for frequently answering question about usb and dvb
+ stuff, a big thank you
+
+ Bernd Wagner for helping with huge bug reports and discussions.
+
+ Some guys on the linux-dvb mailing list for encouraging me
+
+ Peter Schildmann >peter.schildmann-nospam-at-web.de< for his
+ user-level firmware loader, which saves a lot of time
+ (when writing the vp7041 driver)
+
+ Ulf Hermenau for helping me out with traditional chinese.
+
+ André Smoktun and Christian Frömmel for supporting me with
+ hardware and listening to my problems very patient
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/readme.txt linux-2.6.8.1-patched/Documentation/dvb/readme.txt
--- linux-2.6.8.1-dvb1/Documentation/dvb/readme.txt 2004-09-17 12:27:25.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/readme.txt 2004-09-01 12:19:00.000000000 +0200
@@ -28,9 +28,9 @@
"faq.txt"
contains frequently asked questions and their answers.
-"firmware.txt"
-contains informations for required external firmware
-files and where to get them.
+"get_dvb_firmware"
+script to download and extract firmware for those devices
+that require it.
"ttusb-dec.txt"
contains detailed informations about the
diff -uraNwB linux-2.6.8.1-dvb1/Documentation/dvb/ttusb-dec.txt linux-2.6.8.1-patched/Documentation/dvb/ttusb-dec.txt
--- linux-2.6.8.1-dvb1/Documentation/dvb/ttusb-dec.txt 2004-09-17 12:27:25.000000000 +0200
+++ linux-2.6.8.1-patched/Documentation/dvb/ttusb-dec.txt 2004-09-01 12:19:00.000000000 +0200
@@ -23,34 +23,17 @@
Getting the Firmware
--------------------
-The firmware can be found in the software update zip files on this page:
-http://www.hauppauge.de/sw_dec.htm
-
-The firmwares are named as follows:
-DEC2000-t: STB_PC_T.bin
-DEC2540-t: STB_PC_X.bin
-DEC3000-s: STB_PC_S.bin
-
-Note that firmwares since version 2.16 beta2 for the DEC2000-t give the device
-the USB ID of the DEC3000-s. The driver copes with this.
-
-Instructions follow for retrieving version 2.16 of the firmware:
-
-wget http://hauppauge.lightpath.net/de/dec216.exe
-unzip -j dec216.exe software/OEM/STB/App/Boot/STB_PC_T.bin
-unzip -j dec216.exe software/OEM/STB/App/Boot/STB_PC_X.bin
-unzip -j dec216.exe software/OEM/STB/App/Boot/STB_PC_S.bin
+To download the firmware, use the following commands:
+"get_dvb_firmware dec2000t"
+"get_dvb_firmware dec2540t"
+"get_dvb_firmware dec3000s"
Compilation Notes for 2.4 kernels
---------------------------------
For 2.4 kernels the firmware for the DECs is compiled into the driver itself.
-The firmwares are expected to be in the build-2.4 directory at compilation
-time.
-mv STB_PC_T.bin build-2.4/dvb-ttusb-dec-2000t.fw
-mv STB_PC_X.bin build-2.4/dvb-ttusb-dec-2540t.fw
-mv STB_PC_S.bin build-2.4/dvb-ttusb-dec-3000s.fw
+Copy the three files downloaded above into the build-2.4 directory.
Hotplug Firmware Loading for 2.6 kernels
@@ -58,6 +41,4 @@
For 2.6 kernels the firmware is loaded at the point that the driver module is
loaded. See linux/Documentation/dvb/firmware.txt for more information.
-mv STB_PC_T.bin /usr/lib/hotplug/firmware/dvb-ttusb-dec-2000t.fw
-mv STB_PC_X.bin /usr/lib/hotplug/firmware/dvb-ttusb-dec-2540t.fw
-mv STB_PC_S.bin /usr/lib/hotplug/firmware/dvb-ttusb-dec-3000s.fw
+Copy the three files downloaded above into the /usr/lib/hotplug/firmware directory.
diff -uraNwB linux-2.6.8.1-dvb1/drivers/media/dvb/Kconfig linux-2.6.8.1-patched/drivers/media/dvb/Kconfig
--- linux-2.6.8.1-dvb1/drivers/media/dvb/Kconfig 2004-09-15 15:34:22.000000000 +0200
+++ linux-2.6.8.1-patched/drivers/media/dvb/Kconfig 2004-09-15 10:26:44.000000000 +0200
@@ -12,20 +12,11 @@
own a DVB adapter and want to use it or if you compile Linux for
a digital SetTopBox.
- API specs and user tools are available from
- <http://www.linuxtv.org/>.
+ API specs and user tools are available from <http://www.linuxtv.org/>.
Please report problems regarding this driver to the LinuxDVB
mailing list.
- You might want add the following lines to your /etc/modules.conf:
-
- alias char-major-250 dvb
- alias dvb dvb-ttpci
- below dvb-ttpci alps_bsru6 alps_bsrv2 \
- grundig_29504-401 grundig_29504-491 \
- ves1820
-
If unsure say N.
source "drivers/media/dvb/dvb-core/Kconfig"
@@ -40,6 +31,7 @@
depends on DVB_CORE && USB
source "drivers/media/dvb/ttusb-budget/Kconfig"
source "drivers/media/dvb/ttusb-dec/Kconfig"
+source "drivers/media/dvb/dibusb/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
depends on DVB_CORE && PCI
diff -uraNwB linux-2.6.8.1-dvb1/drivers/media/dvb/ttusb-dec/Kconfig linux-2.6.8.1-patched/drivers/media/dvb/ttusb-dec/Kconfig
--- linux-2.6.8.1-dvb1/drivers/media/dvb/ttusb-dec/Kconfig 2004-09-15 15:34:22.000000000 +0200
+++ linux-2.6.8.1-patched/drivers/media/dvb/ttusb-dec/Kconfig 2004-09-01 12:19:01.000000000 +0200
@@ -12,8 +12,10 @@
only compressed MPEG data over the USB bus, so you need
an external software decoder to watch TV on your computer.
- The DEC devices require firmware in order to boot into a mode in
- which they are slaves to the PC. See
- <file:Documentation/dvb/ttusb-dec.txt> for details.
+ This driver needs external firmware. Please use the commands
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t",
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t",
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s",
+ download/extract them, and then copy them to /usr/lib/hotplug/firmware.
Say Y if you own such a device and want to use it.
diff -uraNwB linux-2.6.8.1-dvb1/drivers/media/dvb/ttpci/Kconfig linux-2.6.8.1-patched/drivers/media/dvb/ttpci/Kconfig
--- linux-2.6.8.1-dvb1/drivers/media/dvb/ttpci/Kconfig 2004-09-15 15:34:22.000000000 +0200
+++ linux-2.6.8.1-patched/drivers/media/dvb/ttpci/Kconfig 2004-09-15 10:26:45.000000000 +0200
@@ -11,11 +11,16 @@
This driver only supports the fullfeatured cards with
onboard MPEG2 decoder.
+ This driver needs an external firmware. Please use the script
+ "<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to
+ download/extract it, and then copy it to /usr/lib/hotplug/firmware.
+
Say Y if you own such a card and want to use it.
config DVB_AV7110_FIRMWARE
bool "Compile AV7110 firmware into the driver"
depends on DVB_AV7110 && !STANDALONE
+ default y if DVB_AV7110=y
help
The AV7110 firmware is normally loaded by the firmware hotplug manager.
If you want to compile the firmware into the driver you need to say
@@ -33,6 +38,7 @@
config DVB_AV7110_OSD
bool "AV7110 OSD support"
depends on DVB_AV7110
+ default y if DVB_AV7110=y || DVB_AV7110=m
help
The AV7110 firmware provides some code to generate an OnScreenDisplay
on the video output. This is kind of nonstandard and not guaranteed to
@@ -91,7 +97,7 @@
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
- depends on DVB_BUDGET
+ depends on DVB_CORE && DVB_BUDGET
select DVB_AV7110
help
Support for Budget Patch (full TS) modification on