[PATCH][PPC32] Refactor common Book-E exception handling macros
From: Kumar Gala
Date: Wed Aug 25 2004 - 17:34:30 EST
Andrew,
The following patch moves common code for the PowerPC Book-E architecture
into a common header file for exception processing. I've check with both
Paul and Matt, and they have ok'd the idea.
--
Refefactor common Book-E exception handling macros into a single file to
reduce code duplication.
Signed-off-by: Kumar Gala <kumar.gala@xxxxxxxxxxxxx>
--
diff -Nru a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
--- a/arch/ppc/kernel/head_44x.S 2004-08-25 17:03:41 -05:00
+++ b/arch/ppc/kernel/head_44x.S 2004-08-25 17:03:41 -05:00
@@ -41,16 +41,9 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/offsets.h>
+#include "head_booke.h"
-/*
- * Macros
- */
-
-#define SET_IVOR(vector_number, vector_label) \
- li r26,vector_label@l; \
- mtspr SPRN_IVOR##vector_number,r26; \
- sync
-
+
/* As with the other PowerPC ports, it is expected that when code
* execution begins here, the following registers contain valid, yet
* optional, information:
@@ -301,234 +294,6 @@
* Interrupt vectors must be aligned on a 16 byte boundary.
* We align on a 32 byte cache line boundary for good measure.
*/
-
-#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG4W,r1; \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- beq 1f; \
- mfspr r1,SPRG3; /* if from user, start at top of */\
- lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
- addi r1,r1,THREAD_SIZE; \
-1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
- tophys(r11,r1); \
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRG0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRG1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r10,SPRG4R; \
- mfspr r12,SRR0; \
- stw r10,GPR1(r11); \
- mfspr r9,SRR1; \
- stw r10,0(r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions. This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors. For Book E
- * processors, we also have a reserved register (SPRG2) that is only used
- * in critical exceptions so we can free up a GPR to use as the base for
- * indirect access to the critical exception save area. This is necessary
- * since the MMU is always on and the save area is offset from KERNELBASE.
- */
-#define CRITICAL_EXCEPTION_PROLOG \
- mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \
- lis r8,crit_save@ha; \
- stw r10,crit_r10@l(r8); \
- stw r11,crit_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,crit_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,crit_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,crit_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,crit_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,crit_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,crit_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,crit_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,crit_srr1@l(r8); \
- mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,critical_stack_top@h; \
- ori r11,r11,critical_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,CSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,CSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for machine check exceptions. This is similar to
- * the critical exception prolog, except that machine check exceptions
- * have their own save area. For Book E processors, we also have a
- * reserved register (SPRG6) that is only used in machine check exceptions
- * so we can free up a GPR to use as the base for indirect access to the
- * machine check exception save area. This is necessary since the MMU
- * is always on and the save area is offset from KERNELBASE.
- */
-#define MCHECK_EXCEPTION_PROLOG \
- mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \
- lis r8,mcheck_save@ha; \
- stw r10,mcheck_r10@l(r8); \
- stw r11,mcheck_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,mcheck_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,mcheck_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,mcheck_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,mcheck_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,mcheck_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,mcheck_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,mcheck_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,mcheck_srr1@l(r8); \
- mfspr r10,CSRR0; \
- stw r10,mcheck_csrr0@l(r8); \
- mfspr r10,CSRR1; \
- stw r10,mcheck_csrr1@l(r8); \
- mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,mcheck_stack_top@h; \
- ori r11,r11,mcheck_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,MCSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,MCSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception vectors.
- */
-#define START_EXCEPTION(label) \
- .align 5; \
-label:
-
-#define FINISH_EXCEPTION(func) \
- bl transfer_to_handler_full; \
- .long func; \
- .long ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer) \
- START_EXCEPTION(label); \
- NORMAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- CRITICAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define MCHECK_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- MCHECK_EXCEPTION_PROLOG; \
- lis r4,MCSR_MCS@h; \
- mtspr SPRN_MCSR,r4; \
- mfspr r5,SPRN_ESR; \
- stw r5,_ESR(r11); \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, mcheck_transfer_to_handler, \
- ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,TRAP(r11); \
- lis r10,msr@h; \
- ori r10,r10,msr@l; \
- copyee(r10, r9); \
- bl tfer; \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
- ret_from_except)
interrupt_base:
/* Critical Input Interrupt */
diff -Nru a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/arch/ppc/kernel/head_booke.h 2004-08-25 17:03:41 -05:00
@@ -0,0 +1,240 @@
+#ifndef __HEAD_BOOKE_H__
+#define __HEAD_BOOKE_H__
+
+/*
+ * Macros used for common Book-e exception handling
+ */
+
+#define SET_IVOR(vector_number, vector_label) \
+ li r26,vector_label@l; \
+ mtspr SPRN_IVOR##vector_number,r26; \
+ sync
+
+#define NORMAL_EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG4W,r1; \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ beq 1f; \
+ mfspr r1,SPRG3; /* if from user, start at top of */\
+ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
+ addi r1,r1,THREAD_SIZE; \
+1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ tophys(r11,r1); \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r10,SPRG4R; \
+ mfspr r12,SRR0; \
+ stw r10,GPR1(r11); \
+ mfspr r9,SRR1; \
+ stw r10,0(r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions. This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors. For Book E
+ * processors, we also have a reserved register (SPRG2) that is only used
+ * in critical exceptions so we can free up a GPR to use as the base for
+ * indirect access to the critical exception save area. This is necessary
+ * since the MMU is always on and the save area is offset from KERNELBASE.
+ */
+#define CRITICAL_EXCEPTION_PROLOG \
+ mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \
+ lis r8,crit_save@ha; \
+ stw r10,crit_r10@l(r8); \
+ stw r11,crit_r11@l(r8); \
+ mfspr r10,SPRG0; \
+ stw r10,crit_sprg0@l(r8); \
+ mfspr r10,SPRG1; \
+ stw r10,crit_sprg1@l(r8); \
+ mfspr r10,SPRG4R; \
+ stw r10,crit_sprg4@l(r8); \
+ mfspr r10,SPRG5R; \
+ stw r10,crit_sprg5@l(r8); \
+ mfspr r10,SPRG7R; \
+ stw r10,crit_sprg7@l(r8); \
+ mfspr r10,SPRN_PID; \
+ stw r10,crit_pid@l(r8); \
+ mfspr r10,SRR0; \
+ stw r10,crit_srr0@l(r8); \
+ mfspr r10,SRR1; \
+ stw r10,crit_srr1@l(r8); \
+ mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ lis r11,critical_stack_top@h; \
+ ori r11,r11,critical_stack_top@l; \
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ mfspr r11,SPRG3; /* if from user, start at top of */\
+ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ addi r11,r11,THREAD_SIZE; \
+1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
+ stw r12,_DEAR(r11); /* since they may have had stuff */\
+ mfspr r9,SPRN_ESR; /* in them at the point where the */\
+ stw r9,_ESR(r11); /* exception was taken */\
+ mfspr r12,CSRR0; \
+ stw r1,GPR1(r11); \
+ mfspr r9,CSRR1; \
+ stw r1,0(r11); \
+ tovirt(r1,r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for machine check exceptions. This is similar to
+ * the critical exception prolog, except that machine check exceptions
+ * have their own save area. For Book E processors, we also have a
+ * reserved register (SPRG6) that is only used in machine check exceptions
+ * so we can free up a GPR to use as the base for indirect access to the
+ * machine check exception save area. This is necessary since the MMU
+ * is always on and the save area is offset from KERNELBASE.
+ */
+#define MCHECK_EXCEPTION_PROLOG \
+ mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \
+ lis r8,mcheck_save@ha; \
+ stw r10,mcheck_r10@l(r8); \
+ stw r11,mcheck_r11@l(r8); \
+ mfspr r10,SPRG0; \
+ stw r10,mcheck_sprg0@l(r8); \
+ mfspr r10,SPRG1; \
+ stw r10,mcheck_sprg1@l(r8); \
+ mfspr r10,SPRG4R; \
+ stw r10,mcheck_sprg4@l(r8); \
+ mfspr r10,SPRG5R; \
+ stw r10,mcheck_sprg5@l(r8); \
+ mfspr r10,SPRG7R; \
+ stw r10,mcheck_sprg7@l(r8); \
+ mfspr r10,SPRN_PID; \
+ stw r10,mcheck_pid@l(r8); \
+ mfspr r10,SRR0; \
+ stw r10,mcheck_srr0@l(r8); \
+ mfspr r10,SRR1; \
+ stw r10,mcheck_srr1@l(r8); \
+ mfspr r10,CSRR0; \
+ stw r10,mcheck_csrr0@l(r8); \
+ mfspr r10,CSRR1; \
+ stw r10,mcheck_csrr1@l(r8); \
+ mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ lis r11,mcheck_stack_top@h; \
+ ori r11,r11,mcheck_stack_top@l; \
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ mfspr r11,SPRG3; /* if from user, start at top of */\
+ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ addi r11,r11,THREAD_SIZE; \
+1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
+ stw r12,_DEAR(r11); /* since they may have had stuff */\
+ mfspr r9,SPRN_ESR; /* in them at the point where the */\
+ stw r9,_ESR(r11); /* exception was taken */\
+ mfspr r12,MCSRR0; \
+ stw r1,GPR1(r11); \
+ mfspr r9,MCSRR1; \
+ stw r1,0(r11); \
+ tovirt(r1,r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Exception vectors.
+ */
+#define START_EXCEPTION(label) \
+ .align 5; \
+label:
+
+#define FINISH_EXCEPTION(func) \
+ bl transfer_to_handler_full; \
+ .long func; \
+ .long ret_from_except_full
+
+#define EXCEPTION(n, label, hdlr, xfer) \
+ START_EXCEPTION(label); \
+ NORMAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(label); \
+ CRITICAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define MCHECK_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(label); \
+ MCHECK_EXCEPTION_PROLOG; \
+ mfspr r5,SPRN_ESR; \
+ stw r5,_ESR(r11); \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, mcheck_transfer_to_handler, \
+ ret_from_mcheck_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,TRAP(r11); \
+ lis r10,msr@h; \
+ ori r10,r10,msr@l; \
+ copyee(r10, r9); \
+ bl tfer; \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+
+#endif /* __HEAD_BOOKE_H__ */
diff -Nru a/arch/ppc/kernel/head_e500.S b/arch/ppc/kernel/head_e500.S
--- a/arch/ppc/kernel/head_e500.S 2004-08-25 17:03:41 -05:00
+++ b/arch/ppc/kernel/head_e500.S 2004-08-25 17:03:41 -05:00
@@ -41,15 +41,7 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/offsets.h>
-
-/*
- * Macros
- */
-
-#define SET_IVOR(vector_number, vector_label) \
- li r26,vector_label@l; \
- mtspr SPRN_IVOR##vector_number,r26; \
- sync
+#include "head_booke.h"
/* As with the other PowerPC ports, it is expected that when code
* execution begins here, the following registers contain valid, yet
@@ -370,232 +362,6 @@
* Interrupt vectors must be aligned on a 16 byte boundary.
* We align on a 32 byte cache line boundary for good measure.
*/
-
-#define NORMAL_EXCEPTION_PROLOG \
- mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
- mtspr SPRN_SPRG1,r11; \
- mtspr SPRN_SPRG4W,r1; \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- beq 1f; \
- mfspr r1,SPRG3; /* if from user, start at top of */\
- lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
- addi r1,r1,THREAD_SIZE; \
-1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
- tophys(r11,r1); \
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mfspr r10,SPRG0; \
- stw r10,GPR10(r11); \
- mfspr r12,SPRG1; \
- stw r12,GPR11(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r10,SPRG4R; \
- mfspr r12,SRR0; \
- stw r10,GPR1(r11); \
- mfspr r9,SRR1; \
- stw r10,0(r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions. This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors. For Book E
- * processors, we also have a reserved register (SPRG2) that is only used
- * in critical exceptions so we can free up a GPR to use as the base for
- * indirect access to the critical exception save area. This is necessary
- * since the MMU is always on and the save area is offset from KERNELBASE.
- */
-#define CRITICAL_EXCEPTION_PROLOG \
- mtspr SPRG2,r8; /* SPRG2 only used in criticals */ \
- lis r8,crit_save@ha; \
- stw r10,crit_r10@l(r8); \
- stw r11,crit_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,crit_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,crit_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,crit_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,crit_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,crit_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,crit_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,crit_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,crit_srr1@l(r8); \
- mfspr r8,SPRG2; /* SPRG2 only used in criticals */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,critical_stack_top@h; \
- ori r11,r11,critical_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,CSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,CSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for machine check exceptions. This is similar to
- * the critical exception prolog, except that machine check exceptions
- * have their own save area. For Book E processors, we also have a
- * reserved register (SPRG6) that is only used in machine check exceptions
- * so we can free up a GPR to use as the base for indirect access to the
- * machine check exception save area. This is necessary since the MMU
- * is always on and the save area is offset from KERNELBASE.
- */
-#define MCHECK_EXCEPTION_PROLOG \
- mtspr SPRG6W,r8; /* SPRG6 used in machine checks */ \
- lis r8,mcheck_save@ha; \
- stw r10,mcheck_r10@l(r8); \
- stw r11,mcheck_r11@l(r8); \
- mfspr r10,SPRG0; \
- stw r10,mcheck_sprg0@l(r8); \
- mfspr r10,SPRG1; \
- stw r10,mcheck_sprg1@l(r8); \
- mfspr r10,SPRG4R; \
- stw r10,mcheck_sprg4@l(r8); \
- mfspr r10,SPRG5R; \
- stw r10,mcheck_sprg5@l(r8); \
- mfspr r10,SPRG7R; \
- stw r10,mcheck_sprg7@l(r8); \
- mfspr r10,SPRN_PID; \
- stw r10,mcheck_pid@l(r8); \
- mfspr r10,SRR0; \
- stw r10,mcheck_srr0@l(r8); \
- mfspr r10,SRR1; \
- stw r10,mcheck_srr1@l(r8); \
- mfspr r10,CSRR0; \
- stw r10,mcheck_csrr0@l(r8); \
- mfspr r10,CSRR1; \
- stw r10,mcheck_csrr1@l(r8); \
- mfspr r8,SPRG6R; /* SPRG6 used in machine checks */ \
- mfcr r10; /* save CR in r10 for now */\
- mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\
- andi. r11,r11,MSR_PR; \
- lis r11,mcheck_stack_top@h; \
- ori r11,r11,mcheck_stack_top@l; \
- beq 1f; \
- /* COMING FROM USER MODE */ \
- mfspr r11,SPRG3; /* if from user, start at top of */\
- lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
- addi r11,r11,THREAD_SIZE; \
-1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
- stw r10,_CCR(r11); /* save various registers */\
- stw r12,GPR12(r11); \
- stw r9,GPR9(r11); \
- mflr r10; \
- stw r10,_LINK(r11); \
- mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
- stw r12,_DEAR(r11); /* since they may have had stuff */\
- mfspr r9,SPRN_ESR; /* in them at the point where the */\
- stw r9,_ESR(r11); /* exception was taken */\
- mfspr r12,MCSRR0; \
- stw r1,GPR1(r11); \
- mfspr r9,MCSRR1; \
- stw r1,0(r11); \
- tovirt(r1,r11); \
- rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
- stw r0,GPR0(r11); \
- SAVE_4GPRS(3, r11); \
- SAVE_2GPRS(7, r11)
-
-/*
- * Exception vectors.
- */
-#define START_EXCEPTION(label) \
- .align 5; \
-label:
-
-#define FINISH_EXCEPTION(func) \
- bl transfer_to_handler_full; \
- .long func; \
- .long ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer) \
- START_EXCEPTION(label); \
- NORMAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- CRITICAL_EXCEPTION_PROLOG; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define MCHECK_EXCEPTION(n, label, hdlr) \
- START_EXCEPTION(label); \
- MCHECK_EXCEPTION_PROLOG; \
- mfspr r5,SPRN_ESR; \
- stw r5,_ESR(r11); \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
- NOCOPY, mcheck_transfer_to_handler, \
- ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
- li r10,trap; \
- stw r10,TRAP(r11); \
- lis r10,msr@h; \
- ori r10,r10,msr@l; \
- copyee(r10, r9); \
- bl tfer; \
- .long hdlr; \
- .long ret
-
-#define COPY_EE(d, s) rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
- ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
- ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr) \
- EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
- ret_from_except)
interrupt_base:
/* Critical Input Interrupt */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/