Re: HCI USB on USB 2.0: hci_usb_intr_rx_submit (works with USB 1.1)

[Raf D'Halleweyn]

On Fri, 2004-08-20 at 10:31 +0200, Marcel Holtmann wrote:
> your dongle looks like a Broadcom based dongle. Please include the part
> from /proc/bus/usb/devices matching your device. The main problem is
> that the mini driver and the firmware for the Broadcom dongle can't be
> loaded throught request_firmware() by the bcm203x driver. Check the
> BlueZ webpage for more details and put these files in the correct place.
> 
> Regards
> 
> Marcel

Okay, I had bluez-bluefw installed (Debian package) but it seems that
bluez now uses the standard firmware loading mechanism (request_firmware
()). As such, I copied the BCM2033-FW.bin and BCM2033-MD.hex files from
that package into /usr/lib/hotplug/firmware and removed bluez-bluefw.

However, I cannot find any evidence of the firmware actually being
loaded. I believe that my hotplug install is correctly installed (it can
load the ipw2100 firmware). I added some debugging
to /etc/hotplug/firmware.agent, but couldn't find any evidence of any
firmware being requested for the dongle.

Any suggestions what I could try next? Should I add USB_DEVICE(0x0a12,
0x0001) to the usb_device_id array in bcm203x.c?

BTW this used to work (but maybe this was under 2.4, using bluefw).

Raf.

/proc/bus/usb/devices for 1/19:
T:  Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 19 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev= 4.43
C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/