Re: Packet writing problems

[Frediano Ziglio]

Il lun, 2004-08-16 alle 21:09, Peter Osterlund ha scritto:
> ...

> > > 
> > > DVD+RW
> > > mkudffs /dev/hdc does not works... doing a strace opening /dev/hdc for
> > > read/write open returns EROFS (or similar). I tried with blockdev
> > > --setrw but still same errors...
> > 
> > I see two problems. The first problem is that the Mt Rainier detection
> > can succeed when it shouldn't, because it forgets to check that the
> > "GET CONFIGURATION" command returns the MRW feature number.
> 
> The second problem is in the dvdrw-support patch in the -mm kernel.
> (This patch is also included in the patch you are using.)
> 
> The problem is that some drives fail the "GET CONFIGURATION" command
> when asked to only return 8 bytes. This happens for example on my
> drive, which is identified as:
> 
>         hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive
> 
> Since the cdrom_mmc3_profile() function already allocates 32 bytes for
> the reply buffer, this patch is enough to make the command succeed on
> my drive.
> 

With these two patch both DVD-RW and DVD+RW works !!! Thanks you very much, it's a dream coming true.
It seems that DVD+RW works better (it's faster) with packet device than with direct writing (mounting /dev/hdc).
When I'll get back to work (on September) I'll test your patch with USB 2 device and another DVD writer.

freddy77


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/