Re: PATCH: Add support for IT8212 IDE controllers

[Elmar Hinz]

Alan Cox wrote:
> On Wed, Aug 04, 2004 at 04:03:43PM +0200, Elmar Hinz wrote:
>
> > When I set in the bios RAID 1 there comes an message similar
> > INVALID GEOMETRY: 0 PHYSICAL HEADS?
> > and booting stops.
>
>
> At which point
>
>
> > but booting continous and I can use the disks.
> > hdparm => 15.70 MB/sec
>
>
> A bit slow.. thanks

I am sorry. I can't test the card in the RAID mode anymore, because it
is in use meanwhile with NORMAL mode an a software raid. Maybe the
output of dmesg in NORMAL mode is usefull for you.


Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
IT8212: IDE controller at PCI slot 0000:00:09.0
PCI: Found IRQ 10 for device 0000:00:09.0
PCI: Sharing IRQ 10 with 0000:00:01.2

(Changing the slots IRQ by bios alters both devices 0000:00:01.2 and 
0000:00:09.0, so they seem to belong both to the card/disks)

IT8212: chipset revision 17
IT8212: 100% native mode on irq 10
    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:pio
it8212: controller in smart mode.
it8212: BIOS seleted a 66MHz clock.
    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:DMA, hdh:pio
it8212: BIOS seleted a 66MHz clock.
hde: WDC WD800JB-00FMA0, ATA DISK drive
ide2 at 0xd400-0xd407,0xd002 on irq 10
hdg: WDC WD800JB-00FMA0, ATA DISK drive
ide3 at 0xb800-0xb807,0xb402 on irq 10
hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hde: max request size: 128KiB
hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hde: recal_intr: error=0x04 { DriveStatusError }
hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hde: irq timeout: status=0xd0 { Busy }

 /dev/ide/host2/bus0/target0/lun0: p1 < p5 p6 p7 p8 >
hdg: max request size: 128KiB
hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hdg: recal_intr: error=0x04 { DriveStatusError }
hdg: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hdg: irq timeout: status=0xd0 { Busy }

 /dev/ide/host2/bus1/target0/lun0: p1 < p5 p6 p7 p8 >
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/