Re: [announce] HVCS for inclusion in 2.6 tree

From: Ryan Arnold
Date: Thu Jul 22 2004 - 17:49:44 EST


On Sat, 2004-07-17 at 21:00, Paul Mackerras wrote:
> The arch/ppc64 stuff mostly looks OK - however I would prefer that you
> created a new arch/ppc64/kernel/hvcs.c (and include/asm-ppc64/hvcs.h)
> rather than tripling the size of the existing hvconsole.c. There are
> a couple of whitespace nits (missing space after "if" in a couple of
> places), and this:

Paul, I think I've fixed up all your complaints/comments.

I've moved the hvcs arch functions out of arch/ppc64/kernel/hvconsole.c
and into arch/ppc64/kernel/hvcserver.c instead of into a file called
hvcs.c (in order to reduce confusion). Additionally, since these
functions aren't needed if hvcs isn't installed I decided that hvcserver
might as well be a module as well.

Paul, thanks for taking a look. Here's the next version of the driver.
Let me know what you think of this round.

I'm a bit concerned about the section where I pull the CLC out of the
pi_buff. The casting that is going on there is a bit messy. Maybe
there is a cleaner way of doing it? The problem is the first ULong of
pi_buff is the partition id, the second ULong is the unit address, and
from then on is character data representing the CLC.

Ryan S. Arnold
IBM Linux Technology Center
diff -uNr linux-2.6.7/include/asm-ppc64/hvcserver.h hvcs_working_linux-2.6.7/include/asm-ppc64/hvcserver.h
--- linux-2.6.7/include/asm-ppc64/hvcserver.h Wed Dec 31 18:00:00 1969
+++ hvcs_working_linux-2.6.7/include/asm-ppc64/hvcserver.h Mon Jul 19 14:48:20 2004
@@ -0,0 +1,46 @@
+/*
+ * hvcserver.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCSERVER_H
+#define _PPC64_HVCSERVER_H
+
+#include <linux/list.h>
+
+/* Converged Location Code length */
+#define HVCS_CLC_LENGTH 79
+
+struct hvcs_partner_info {
+ /* list management */
+ struct list_head node;
+ /* partner unit address */
+ unsigned int unit_address;
+ /*partner partition ID */
+ unsigned int partition_ID;
+ /* CLC (79 chars) + 1 Null-term char */
+ char location_code[HVCS_CLC_LENGTH + 1];
+};
+
+extern int hvcs_free_partner_info(struct list_head *head);
+extern int hvcs_get_partner_info(unsigned int unit_address, struct list_head *head, unsigned long *pi_buff);
+extern int hvcs_register_connection(unsigned int unit_address, unsigned int p_partition_ID, unsigned int p_unit_address);
+extern int hvcs_free_connection(unsigned int unit_address);
+
+#endif /* _PPC64_HVCSERVER_H */
diff -uNr linux-2.6.7/arch/ppc64/kernel/Makefile hvcs_working_linux-2.6.7/arch/ppc64/kernel/Makefile
--- linux-2.6.7/arch/ppc64/kernel/Makefile Wed Jun 16 00:20:19 2004
+++ hvcs_working_linux-2.6.7/arch/ppc64/kernel/Makefile Thu Jul 22 12:13:04 2004
@@ -46,6 +46,7 @@
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
+obj-$(CONFIG_HVCS) += hvcserver.o

obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \
pmac_time.o pmac_nvram.o pmac_low_i2c.o \
diff -uNr linux-2.6.7/arch/ppc64/kernel/hvconsole.c hvcs_working_linux-2.6.7/arch/ppc64/kernel/hvconsole.c
--- linux-2.6.7/arch/ppc64/kernel/hvconsole.c Wed Jun 16 00:19:23 2004
+++ hvcs_working_linux-2.6.7/arch/ppc64/kernel/hvconsole.c Wed Jul 21 16:10:24 2004
@@ -20,6 +20,7 @@
*/

#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/hvcall.h>
#include <asm/prom.h>
#include <asm/hvconsole.h>
@@ -50,6 +51,8 @@
return 0;
}

+EXPORT_SYMBOL(hvc_get_chars);
+
int hvc_put_chars(int index, const char *buf, int count)
{
unsigned long *lbuf = (unsigned long *) buf;
@@ -63,6 +66,8 @@
return 0;
return -1;
}
+
+EXPORT_SYMBOL(hvc_put_chars);

/* return the number of client vterms present */
/* XXX this requires an interface change to handle multiple discontiguous
diff -uNr linux-2.6.7/arch/ppc64/kernel/hvcserver.c hvcs_working_linux-2.6.7/arch/ppc64/kernel/hvcserver.c
--- linux-2.6.7/arch/ppc64/kernel/hvcserver.c Wed Dec 31 18:00:00 1969
+++ hvcs_working_linux-2.6.7/arch/ppc64/kernel/hvcserver.c Thu Jul 22 17:33:53 2004
@@ -0,0 +1,204 @@
+/*
+ * hvcserver.c
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <asm/hvcall.h>
+#include <asm/hvcserver.h>
+#include <asm/io.h>
+
+#define HVCS_ARCH_VERSION "1.0.0"
+
+MODULE_AUTHOR("Ryan S. Arnold <rsa@xxxxxxxxxx>");
+MODULE_DESCRIPTION("IBM hvcs ppc64 API");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HVCS_ARCH_VERSION);
+
+/* Convert arch specific return codes into relevant errnos. The hvcs
+ * functions aren't performance sensitive, so this conversion isn't an
+ * issue. */
+int hvcs_convert(long to_convert)
+{
+ switch (to_convert) {
+ case H_Success:
+ return 0;
+ case H_Parameter:
+ return -EINVAL;
+ case H_Hardware:
+ return -EIO;
+ case H_Busy:
+ case H_LongBusyOrder1msec:
+ case H_LongBusyOrder10msec:
+ case H_LongBusyOrder100msec:
+ case H_LongBusyOrder1sec:
+ case H_LongBusyOrder10sec:
+ case H_LongBusyOrder100sec:
+ return -EBUSY;
+ case H_Function: /* fall through */
+ default:
+ return -EPERM;
+ }
+}
+
+int hvcs_free_partner_info(struct list_head *head)
+{
+ struct hvcs_partner_info *pi;
+ struct list_head *element;
+
+ if (!head) {
+ return -EINVAL;
+ }
+
+ while (!list_empty(head)) {
+ element = head->next;
+ pi = list_entry(element,struct hvcs_partner_info,node);
+ list_del(element);
+ kfree(pi);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(hvcs_free_partner_info);
+
+/* Helper function for hvcs_get_partner_info */
+int hvcs_next_partner(unsigned int unit_address, unsigned long last_p_partition_ID, unsigned long last_p_unit_address, unsigned long *pi_buff)
+
+{
+ long retval;
+ retval = plpar_hcall_norets(H_VTERM_PARTNER_INFO, unit_address,
+ last_p_partition_ID,
+ last_p_unit_address, virt_to_phys(pi_buff));
+ return hvcs_convert(retval);
+}
+
+/* The unit_address parameter is the unit address of the vty-server vdevice
+ * in whose partner information the caller is interested. This function
+ * uses a pointer to a list_head instance in which to store the partner info.
+ * This function returns non-zero on success, or if there is no partner info.
+ *
+ * Invocation of this function should always be followed by an invocation of
+ * hvcs_free_partner_info() using a pointer to the SAME list head instance
+ * that was used to store the partner_info list.
+ */
+int hvcs_get_partner_info(unsigned int unit_address, struct list_head *head, unsigned long *pi_buff)
+{
+ /* This is a page sized buffer to be passed to hvcall per invocation.
+ * NOTE: the first long returned is unit_address. The second long
+ * returned is the partition ID and starting with pi_buff[2] are
+ * HVCS_CLC_LENGTH characters, which are diff size than the unsigned
+ * long, hence the casting mumbojumbo you see later. */
+ unsigned long last_p_partition_ID;
+ unsigned long last_p_unit_address;
+ struct hvcs_partner_info *next_partner_info = NULL;
+ int more = 1;
+ int retval;
+
+ memset(pi_buff,0x00,PAGE_SIZE);
+ /* invalid parameters */
+ if (!head)
+ return -EINVAL;
+
+ last_p_partition_ID = last_p_unit_address = ~0UL;
+ INIT_LIST_HEAD(head);
+
+ if (!pi_buff)
+ return -ENOMEM;
+
+ do {
+ retval = hvcs_next_partner(unit_address, last_p_partition_ID,
+ last_p_unit_address, pi_buff);
+ if (retval) {
+ /* don't indicate that we've failed if we have
+ * any list elements. */
+ if (!list_empty(head))
+ return 0;
+ return retval;
+ }
+
+ last_p_partition_ID = pi_buff[0];
+ last_p_unit_address = pi_buff[1];
+
+ /* This indicates that there are no further partners */
+ if (last_p_partition_ID == ~0UL
+ && last_p_unit_address == ~0UL)
+ break;
+
+ /* This is a very small struct and will be freed soon */
+ next_partner_info = kmalloc(sizeof(struct hvcs_partner_info),
+ GFP_ATOMIC);
+
+ if (!next_partner_info) {
+ printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to"
+ " allocate partner info struct.\n");
+ hvcs_free_partner_info(head);
+ return -ENOMEM;
+ }
+
+ next_partner_info->unit_address
+ = (unsigned int)last_p_unit_address;
+ next_partner_info->partition_ID
+ = (unsigned int)last_p_partition_ID;
+
+ /* copy the Null-term char too */
+ strncpy(&next_partner_info->location_code[0],
+ (char *)&pi_buff[2],
+ strlen((char *)&pi_buff[2]) + 1);
+
+ list_add_tail(&(next_partner_info->node), head);
+ next_partner_info = NULL;
+
+ } while (more);
+
+ return 0;
+}
+EXPORT_SYMBOL(hvcs_get_partner_info);
+
+/* If this function is called once and -EINVAL is returned it may
+ * indicate that the partner info needs to be refreshed for the
+ * target unit address at which point the caller must invoke
+ * hvcs_get_partner_info() and then call this function again. If,
+ * for a second time, -EINVAL is returned then it indicates that
+ * there is probably already a partner connection registered to a
+ * different vty-server@ vdevice. It is also possible that a second
+ * -EINVAL may indicate that one of the parms is not valid, for
+ * instance if the link was removed between the vty-server@ vdevice
+ * and the vty@ vdevice that you are trying to open. Don't shoot the
+ * messenger. Firmware implemented it this way.
+ */
+int hvcs_register_connection( unsigned int unit_address, unsigned int p_partition_ID, unsigned int p_unit_address)
+{
+ long retval;
+ retval = plpar_hcall_norets(H_REGISTER_VTERM, unit_address,
+ p_partition_ID, p_unit_address);
+ return hvcs_convert(retval);
+}
+EXPORT_SYMBOL(hvcs_register_connection);
+
+/* If -EBUSY is returned continue to call this function
+ * until 0 is returned */
+int hvcs_free_connection(unsigned int unit_address)
+{
+ long retval;
+ retval = plpar_hcall_norets(H_FREE_VTERM, unit_address);
+ return hvcs_convert(retval);
+}
+EXPORT_SYMBOL(hvcs_free_connection);
diff -uNr linux-2.6.7/drivers/char/Kconfig hvcs_working_linux-2.6.7/drivers/char/Kconfig
--- linux-2.6.7/drivers/char/Kconfig Wed Jun 16 00:18:55 2004
+++ hvcs_working_linux-2.6.7/drivers/char/Kconfig Thu Jul 22 17:15:02 2004
@@ -586,6 +586,23 @@
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.

+config HVCS
+ tristate "IBM Hypervisor Virtual Console Server support"
+ depends on PPC_PSERIES
+ help
+ Partitionable IBM Power5 ppc64 machines allow hosting of
+ firmware virtual consoles from one Linux partition by
+ another Linux partition. This driver allows console data
+ from Linux partitions to be accessed through TTY device
+ interfaces in the device tree of a Linux partition running
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hvcs.ko. Additionally, this module
+ will depend on arch specific apis exported from hvcserver.ko
+ which will also be compiled when this driver is built as a
+ module.
+
config PC9800_OLDLP
tristate "NEC PC-9800 old-style printer port support"
depends on X86_PC9800 && !PARPORT
diff -uNr linux-2.6.7/drivers/char/Makefile hvcs_working_linux-2.6.7/drivers/char/Makefile
--- linux-2.6.7/drivers/char/Makefile Wed Jun 16 00:20:04 2004
+++ hvcs_working_linux-2.6.7/drivers/char/Makefile Mon Jul 19 13:24:52 2004
@@ -44,6 +44,7 @@
obj-$(CONFIG_SGI_L1_SERIAL) += sn_serial.o
obj-$(CONFIG_VIOCONS) += viocons.o
obj-$(CONFIG_VIOTAPE) += viotape.o
+obj-$(CONFIG_HVCS) += hvcs.o

obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_TIPAR) += tipar.o
diff -uNr linux-2.6.7/drivers/char/hvcs.c hvcs_working_linux-2.6.7/drivers/char/hvcs.c
--- linux-2.6.7/drivers/char/hvcs.c Wed Dec 31 18:00:00 1969
+++ hvcs_working_linux-2.6.7/drivers/char/hvcs.c Thu Jul 22 17:33:30 2004
@@ -0,0 +1,1411 @@
+/*
+ * IBM eServer Hypervisor Virtual Console Server Device Driver
+ * Copyright (C) 2003, 2004 IBM Corp.
+ * Ryan S. Arnold (rsa@xxxxxxxxxx)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author(s) : Ryan S. Arnold <rsa@xxxxxxxxxx>
+ *
+ * This is the device driver for the IBM Hypervisor Virtual Console Server,
+ * "hvcs". The IBM hvcs provides a tty driver interface to allow Linux
+ * user space applications access to the system consoles of logically
+ * partitioned operating systems, e.g. Linux, running on the same partitioned
+ * Power5 ppc64 system. Physical hardware consoles per partition are not
+ * practical on this hardware so system consoles are accessed by this driver
+ * using inter-partition firmware interfaces to virtual terminal devices.
+ *
+ * A vty is known to the HMC as a "virtual serial server adapter". It is a
+ * virtual terminal device that is created by firmware upon partition creation
+ * to act as a partitioned OS's console device.
+ *
+ * Firmware dynamically (via hotplug) exposes vty-servers to a running ppc64
+ * Linux system upon their creation by the HMC or their exposure during boot.
+ * The non-user interactive backend of this driver is implemented as a vio
+ * device driver so that it can receive notification of vty-server lifetimes
+ * after it registers with the vio bus to handle vty-server probe and remove
+ * callbacks.
+ *
+ * Many vty-servers can be configured to connect to one vty, but a vty can
+ * only be actively connected to by a single vty-server, in any manner, at one
+ * time. If the HMC is currently hosting the console for a target Linux
+ * partition; attempts to open the tty device to the partition's console using
+ * the hvcs on any partition will return -EBUSY with every open attempt until
+ * the HMC frees the connection between its vty-server and the desired
+ * partition's vty device. Conversely, a vty-server may only be connected to
+ * a single vty at one time even though it may have several configured vty
+ * partner possibilities.
+ *
+ * Firmware does not provide notification of vty partner changes to this
+ * driver. This means that an HMC Super Admin may add or remove partner vtys
+ * from a vty-server's partner list but the changes will not be signaled to
+ * the vty-server. Firmware only notifies the driver when a vty-server is
+ * added or removed from the system. To compensate for this deficiency, this
+ * driver implements a sysfs update attribute which provides a method for
+ * rescanning partner information upon a user's request.
+ *
+ * Each vty-server, prior to being exposed to this driver is reference counted
+ * using the 2.6 Linux kernel kobject construct. This kobject is also used by
+ * the vio bus to provide a vio device sysfs entry that this driver attaches
+ * device specific attributes to, including partner information. The vio bus
+ * framework also provides a sysfs entry for each vio driver. The hvcs driver
+ * provides driver attributes in this entry.
+ *
+ * For direction on installation and usage of this driver please reference
+ * Documentation/powerpc/hvcs.txt.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/stat.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <asm/hvconsole.h>
+#include <asm/hvcserver.h>
+#include <asm/uaccess.h>
+#include <asm/vio.h>
+
+/* 1.0.0 -> 1.1.0 Added kernel_thread scheduling methodology to driver to
+ * replace wait_task constructs.
+ *
+ * 1.1.0 -> 1.2.0 Moved pi_buff initialization out of arch code into driver
+ * code and added locking to share this buffer between hvcs_struct instances.
+ * This is because the page_size kmalloc can't be done with a spin_lock held.
+ *
+ * Also added sysfs attribute to manually disconnect the vty-server from the vty
+ * due to stupid firmware behavior when opening the connection then sending data
+ * then then quickly closing the connection would cause data loss on the
+ * receiving side. This required some reordering of the termination code.
+ *
+ * Fixed the hangup scenario and fixed memory leaks on module_exit.
+ */
+#define HVCS_DRIVER_VERSION "1.2.0"
+
+MODULE_AUTHOR("Ryan S. Arnold <rsa@xxxxxxxxxx>");
+MODULE_DESCRIPTION("IBM hvcs (Hypervisor Virtual Console Server) Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HVCS_DRIVER_VERSION);
+
+/* Since the Linux TTY code does not currently (2-04-2004) support dynamic
+ * addition of tty derived devices and we shouldn't allocate thousands of
+ * tty_device pointers when the number of vty-server & vty partner connections
+ * will most often be much lower than this, we'll arbitrarily allocate
+ * HVCS_DEFAULT_SERVER_ADAPTERS tty_structs and cdev's by default when we
+ * register the tty_driver. This can be overridden using an insmod parameter. */
+#define HVCS_DEFAULT_SERVER_ADAPTERS 64
+
+/* The user can't insmod with more than HVCS_MAX_SERVER_ADAPTERS hvcs device
+ * nodes as a sanity check. Theoretically there can be over 1 Billion
+ * vty-server & vty partner connections. */
+#define HVCS_MAX_SERVER_ADAPTERS 1024
+
+/* We let Linux assign us a major number and we start the minors at zero. There
+ * is no intuitive mapping between minor number and the target partition. The
+ * mapping of minor number is related to the order the vty-servers are exposed
+ * to this driver via the hvcs_probe function. */
+#define HVCS_MINOR_START 0
+
+#define __ALIGNED__ __attribute__((__aligned__(8)))
+
+/* Converged location code string length + 1 null terminator */
+#define CLC_LENGTH 80
+
+/* How much data can firmware send with each hvc_put_chars()? Maybe this
+ * should be moved into an architecture specific area. */
+#define HVCS_BUFF_LEN 16
+
+/* This is the maximum amount of data we'll let the user send us (hvcs_write) at
+ * once in a chunk as a sanity check. */
+#define HVCS_MAX_FROM_USER 4096
+
+/* Be careful when adding flags to this line discipline. Don't add anything
+ * that will cause echoing or we'll go into recursive loop echoing chars back
+ * and forth with the console drivers. */
+static struct termios hvcs_tty_termios = {
+ .c_iflag = IGNBRK | IGNPAR,
+ .c_oflag = OPOST,
+ .c_cflag = B38400 | CS8 | CREAD | HUPCL,
+ .c_cc = INIT_C_CC
+};
+
+/* This value is used to take the place of a command line parameter when the
+ * module is inserted. It starts as -1 and stays as such if the user doesn't
+ * specify a module insmod parameter. If they DO specify one then it is set to
+ * the value of the integer passed in. */
+static int hvcs_parm_num_devs = -1;
+module_param(hvcs_parm_num_devs, int, 0);
+
+char hvcs_driver_name[] = "hvcs";
+char hvcs_device_node[] = "hvcs";
+char hvcs_driver_string[]
+ = "IBM hvcs (Hypervisor Virtual Console Server) Driver";
+
+/* Status of partner info rescan triggered via sysfs. */
+static int hvcs_rescan_status = 0;
+
+static struct tty_driver *hvcs_tty_driver;
+
+/* This is used to associate a vty-server, as it is exposed to this driver, with
+ * a preallocated tty_struct.index. The dev node and hvcs index numbers are not
+ * re-used after device removal otherwise removing and adding a new one would
+ * link a /dev/hvcs* entry to a different vty-server than it did before the
+ * removal. Incidentally, a newly exposed vty-server will always map to an
+ * incrementally higher /dev/hvcs* entry than the last exposed vty-server. */
+static int hvcs_struct_count = -1;
+
+/* Used by the kernel_thread to pick up I/O operations when the
+ * kernel_thread is already awake. */
+static int hvcs_kicked = 0;
+static wait_queue_head_t hvcs_wait_queue;
+static pid_t hvcs_thread_pid;
+
+/* Used by module_exit to wait for termination of the kernel_thread on rmmod. */
+static struct completion hvcs_exited;
+
+/* We allocate this for the use of all of the hvcs_structs when they fetch
+ * partner info. */
+static unsigned long *hvcs_pi_buff;
+
+static spinlock_t hvcs_pi_lock;
+
+/* One vty-server per hvcs_struct */
+struct hvcs_struct {
+ spinlock_t lock;
+
+ /* This index identifies this hvcs device as the complement to a
+ * specific tty index. */
+ unsigned int index;
+
+ struct tty_struct *tty;
+ unsigned int open_count;
+
+ /* Used to tell the driver kernel_thread what operations need to take
+ * place upon this hvcs_struct instance. */
+ int todo_mask;
+
+ /* This buffer is required so that when hvcs_write_room() reports that
+ * it can send HVCS_BUFF_LEN characters that it will buffer the full
+ * HVCS_BUFF_LEN characters if need be. This is essential for opost
+ * writes since they do not do high level buffering and expect to be
+ * able to send what the driver commits to sending buffering
+ * [e.g. tab to space conversions in n_tty.c opost()]. */
+ char buffer[HVCS_BUFF_LEN];
+ int chars_in_buffer;
+
+ /* Any variable below the kobject is valid before a tty is connected and
+ * stays valid after the tty is disconnected. These shouldn't be
+ * whacked until the koject refcount reaches zero. Some entries may be
+ * changed from sysfs initiatives. */
+ struct kobject kobj; /* ref count & hvcs_struct lifetime */
+ int connected; /* is the vty-server currently connected to a vty? */
+ unsigned int p_unit_address; /* partner unit address */
+ unsigned int p_partition_ID; /* partner partition ID */
+ char p_location_code[CLC_LENGTH];
+ struct list_head next; /* list management */
+ struct vio_dev *vdev;
+};
+
+/* Required to back map a kobject to its containing object */
+#define from_kobj(kobj) container_of(kobj, struct hvcs_struct, kobj)
+
+static struct list_head hvcs_structs = LIST_HEAD_INIT(hvcs_structs);
+
+static void hvcs_unthrottle(struct tty_struct *tty);
+static void hvcs_throttle(struct tty_struct *tty);
+static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+
+static int hvcs_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count);
+static int hvcs_write_room(struct tty_struct *tty);
+static int hvcs_chars_in_buffer(struct tty_struct *tty);
+
+static int hvcs_has_pi(struct hvcs_struct *hvcsd);
+static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd);
+static int hvcs_get_pi(struct hvcs_struct *hvcsd);
+static int hvcs_rescan_devices_list(void);
+
+static int hvcs_partner_connect(struct hvcs_struct *hvcsd);
+static void hvcs_partner_free(struct hvcs_struct *hvcsd);
+
+static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, unsigned int irq, struct vio_dev *dev);
+static void hvcs_final_close(struct hvcs_struct *hvcsd);
+
+static void destroy_hvcs_struct(struct kobject *kobj);
+static int hvcs_open(struct tty_struct *tty, struct file *filp);
+static void hvcs_close(struct tty_struct *tty, struct file *filp);
+static void hvcs_hangup(struct tty_struct * tty);
+
+static void hvcs_create_device_attrs(struct hvcs_struct *hvcsd);
+static void hvcs_remove_device_attrs(struct vio_dev *vdev);
+static void hvcs_create_driver_attrs(void);
+static void hvcs_remove_driver_attrs(void);
+
+static int __devinit hvcs_probe(struct vio_dev *dev, const struct vio_device_id *id);
+static int __devexit hvcs_remove(struct vio_dev *dev);
+static int __init hvcs_module_init(void);
+static void __exit hvcs_module_exit(void);
+
+#define HVCS_SCHED_READ 0x00000001
+#define HVCS_QUICK_READ 0x00000002
+#define HVCS_TRY_WRITE 0x00000004
+#define HVCS_READ_MASK (HVCS_SCHED_READ | HVCS_QUICK_READ)
+
+static void hvcs_kick(void)
+{
+ hvcs_kicked = 1;
+ wmb();
+ wake_up_interruptible(&hvcs_wait_queue);
+}
+
+static void hvcs_unthrottle(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ hvcs_kick();
+}
+
+static void hvcs_throttle(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_disable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+}
+
+/* If the device is being removed we don't have to worry about this interrupt
+ * handler taking any further interrupts because they are disabled which means
+ * the hvcs_struct will always be valid in this handler. */
+static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)dev_instance;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_disable_interrupts(hvcsd->vdev);
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ hvcs_kick();
+
+ return IRQ_HANDLED;
+}
+
+/* This function must be called with the hvcsd->lock held */
+static void hvcs_try_write(struct hvcs_struct *hvcsd)
+{
+ unsigned int unit_address = hvcsd->vdev->unit_address;
+ struct tty_struct *tty = hvcsd->tty;
+ int sent;
+
+ if (hvcsd->todo_mask & HVCS_TRY_WRITE) {
+ /* won't send partial writes */
+ sent = hvc_put_chars(unit_address,
+ &hvcsd->buffer[0],
+ hvcsd->chars_in_buffer );
+ if (sent > 0) {
+ hvcsd->chars_in_buffer = 0;
+ wmb();
+ hvcsd->todo_mask &= ~(HVCS_TRY_WRITE);
+ wmb();
+
+ /* We are still obligated to deliver the data to the
+ * hypervisor even if the tty has been closed because
+ * we commited to delivering it. But don't try to wake
+ * a non-existant tty. */
+ if (tty) {
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP))
+ && tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup) (tty);
+ wake_up_interruptible(&tty->write_wait);
+ }
+ }
+ }
+}
+
+static int hvcs_io(struct hvcs_struct *hvcsd)
+{
+ unsigned int unit_address;
+ struct tty_struct *tty;
+ char buf[HVCS_BUFF_LEN] __ALIGNED__;
+ unsigned long flags;
+ int got;
+ int i;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ unit_address = hvcsd->vdev->unit_address;
+ tty = hvcsd->tty;
+
+ hvcs_try_write(hvcsd);
+
+ if (!tty || test_bit(TTY_THROTTLED, &tty->flags)) {
+ hvcsd->todo_mask &= ~(HVCS_READ_MASK);
+ goto bail;
+ } else if (!(hvcsd->todo_mask & (HVCS_READ_MASK)))
+ goto bail;
+
+ /* remove the read masks*/
+ hvcsd->todo_mask &= ~(HVCS_READ_MASK);
+
+ if ((tty->flip.count + HVCS_BUFF_LEN) < TTY_FLIPBUF_SIZE) {
+ got = hvc_get_chars(unit_address,
+ &buf[0],
+ HVCS_BUFF_LEN);
+ for (i=0;got && i<got;i++)
+ tty_insert_flip_char(tty, buf[i], TTY_NORMAL);
+ }
+
+ /* Give the TTY time to process the data we just sent. */
+ if (got)
+ hvcsd->todo_mask |= HVCS_QUICK_READ;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ if (tty->flip.count) {
+ /* This is synch because tty->low_latency == 1 */
+ tty_flip_buffer_push(tty);
+ }
+
+ if (!got){
+ /* Do this _after_ the flip_buffer_push */
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ vio_enable_interrupts(hvcsd->vdev);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+
+ return hvcsd->todo_mask;
+
+ bail:
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return hvcsd->todo_mask;
+}
+
+int khvcsd(void *unused)
+{
+ struct hvcs_struct *hvcsd = NULL;
+ struct list_head *element;
+ struct list_head *safe_temp;
+ int hvcs_todo_mask;
+
+ daemonize("khvcsd");
+
+ allow_signal(SIGTERM);
+
+ do {
+ wait_queue_t wait = __WAITQUEUE_INITIALIZER(wait, current);
+ hvcs_todo_mask = 0;
+ hvcs_kicked = 0;
+ wmb();
+ list_for_each_safe(element, safe_temp, &hvcs_structs) {
+ hvcsd = list_entry(element, struct hvcs_struct, next);
+ hvcs_todo_mask |= hvcs_io(hvcsd);
+ }
+
+ /* If any of the hvcs adapters want to try a write or quick read
+ * don't schedule(), yield a smidgen then execute the hvcs_io
+ * thread again for those that want the write. */
+ if (hvcs_todo_mask & (HVCS_TRY_WRITE | HVCS_QUICK_READ)) {
+ yield();
+ continue;
+ }
+
+ add_wait_queue(&hvcs_wait_queue, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!hvcs_kicked)
+ schedule();
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&hvcs_wait_queue, &wait);
+
+ } while (!signal_pending(current));
+
+ complete_and_exit(&hvcs_exited,0);
+}
+
+static struct vio_device_id hvcs_driver_table[] __devinitdata= {
+ {"serial-server", "hvterm2"},
+ { 0,}
+};
+MODULE_DEVICE_TABLE(vio, hvcs_driver_table);
+
+/* callback when the kboject ref count reaches zero */
+static void destroy_hvcs_struct(struct kobject *kobj)
+{
+ struct hvcs_struct *hvcsd = from_kobj(kobj);
+ struct vio_dev *vdev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ /* the list_del poisons the pointers */
+ list_del(&(hvcsd->next));
+
+ if (hvcsd->connected == 1) {
+ hvcs_partner_free(hvcsd);
+ printk(KERN_INFO "HVCS: Closed vty-server@%X and"
+ " partner vty@%X:%d connection.\n",
+ hvcsd->vdev->unit_address,
+ hvcsd->p_unit_address,
+ (unsigned int)hvcsd->p_partition_ID);
+ }
+ printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n",
+ hvcsd->vdev->unit_address);
+
+ vdev = hvcsd->vdev;
+ hvcsd->vdev = NULL;
+
+ hvcsd->p_unit_address = 0;
+ hvcsd->p_partition_ID = 0;
+ memset(&hvcsd->p_location_code[0], 0x00, CLC_LENGTH);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ hvcs_remove_device_attrs(vdev);
+
+ kfree(hvcsd);
+}
+
+/* This function must be called with hvcsd->lock held. */
+static void hvcs_final_close(struct hvcs_struct *hvcsd)
+{
+ vio_disable_interrupts(hvcsd->vdev);
+ free_irq(hvcsd->vdev->irq, hvcsd);
+
+ hvcsd->todo_mask = 0;
+
+ /* These two may be redundant if the operation was a close. */
+ if (hvcsd->tty) {
+ hvcsd->tty->driver_data = NULL;
+ hvcsd->tty = NULL;
+ }
+
+ hvcsd->open_count = 0;
+ hvcsd->p_partition_ID = 0;
+ hvcsd->p_unit_address = 0;
+
+ memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN);
+ hvcsd->chars_in_buffer = 0;
+}
+
+static struct kobj_type hvcs_kobj_type = {
+ .release = destroy_hvcs_struct,
+};
+
+static int __devinit hvcs_probe(
+ struct vio_dev *dev,
+ const struct vio_device_id *id)
+{
+ struct hvcs_struct *hvcsd;
+
+ if (!dev || !id) {
+ printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
+ return -EPERM;
+ }
+
+ hvcsd = kmalloc(sizeof(*hvcsd), GFP_KERNEL);
+ if (!hvcsd) {
+ return -ENODEV;
+ }
+
+ /* hvcsd->tty is zeroed out with the memset */
+ memset(hvcsd, 0x00, sizeof(*hvcsd));
+
+ hvcsd->lock = SPIN_LOCK_UNLOCKED;
+ /* Automatically incs the refcount the first time */
+ kobject_init(&hvcsd->kobj);
+ /* Set up the callback for terminating the hvcs_struct's life */
+ hvcsd->kobj.ktype = &hvcs_kobj_type;
+
+ hvcsd->vdev = dev;
+ dev->dev.driver_data = hvcsd;
+
+ hvcsd->index = ++hvcs_struct_count;
+ hvcsd->chars_in_buffer = 0;
+ hvcsd->todo_mask = 0;
+ hvcsd->connected = 0;
+
+ /* This will populate the hvcs_struct's partner info fields for the
+ * first time. */
+ if (hvcs_get_pi(hvcsd)) {
+ printk(KERN_ERR "HVCS: Failed to fetch partner"
+ " info for vty-server@%X on device probe.\n",
+ hvcsd->vdev->unit_address);
+ }
+
+ /* If a user app opens a tty that corresponds to this vty-server before
+ * the hvcs_struct has been added to the devices list then the user app
+ * will get -ENODEV. */
+
+ list_add_tail(&(hvcsd->next), &hvcs_structs);
+
+ hvcs_create_device_attrs(hvcsd);
+
+ printk(KERN_INFO "HVCS: Added vty-server@%X.\n", dev->unit_address);
+
+ /* DON'T enable interrupts here because there is no user to receive the
+ * data. */
+ return 0;
+}
+
+static int __devexit hvcs_remove(struct vio_dev *dev)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)dev->dev.driver_data;
+ unsigned long flags;
+ struct kobject *kobjp;
+ struct tty_struct *tty;
+
+ if (!hvcsd)
+ return -ENODEV;
+
+ /* By this time the vty-server won't be getting any more interrups */
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ tty = hvcsd->tty;
+
+ kobjp = &hvcsd->kobj;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /* Let the last holder of this object cause it to be removed, which
+ * would probably be tty_hangup below. */
+ kobject_put (kobjp);
+
+ /* The hangup is a scheduled function which will auto chain call
+ * hvcs_hangup. The tty should always be valid at this time unless a
+ * simultaneous tty close already cleaned up the hvcs_struct. */
+ if (tty)
+ tty_hangup(tty);
+
+ printk(KERN_INFO "HVCS: vty-server@%X removed from the"
+ " vio bus.\n", dev->unit_address);
+ return 0;
+};
+
+static struct vio_driver hvcs_vio_driver = {
+ .name = hvcs_driver_name,
+ .id_table = hvcs_driver_table,
+ .probe = hvcs_probe,
+ .remove = hvcs_remove,
+};
+
+/* Only called from hvcs_get_pi please */
+static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd)
+{
+ int clclength;
+
+ hvcsd->p_unit_address = pi->unit_address;
+ hvcsd->p_partition_ID = pi->partition_ID;
+ clclength = strlen(&pi->location_code[0]);
+ if (clclength > CLC_LENGTH - 1)
+ clclength = CLC_LENGTH - 1;
+
+ /* copy the null-term char too */
+ strncpy(&hvcsd->p_location_code[0],
+ &pi->location_code[0], clclength + 1);
+}
+
+/* Traverse the list and add the partner info that is found to the hvcs_struct
+ * struct entry. NOTE: At this time I know that partner info will return a
+ * single entry but in the future there may be multiple partner info entries per
+ * vty-server and you'll want to zero out that list and reset it. If for some
+ * reason you have an old version of this driver but there IS more than one
+ * partner info then hvcsd->p_* will hold the last partner info data from the
+ * firmware query. A good way to update this code would be to replace the three
+ * partner info fields in hvcs_struct with a list of hvcs_partner_info
+ * instances.
+ *
+ * This function must be called with the hvcsd->lock held */
+static int hvcs_get_pi(struct hvcs_struct *hvcsd)
+{
+ /* struct hvcs_partner_info *head_pi = NULL; */
+ struct hvcs_partner_info *pi = NULL;
+ unsigned int unit_address = hvcsd->vdev->unit_address;
+ struct list_head head;
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcs_pi_lock, flags);
+ if (!hvcs_pi_buff) {
+ spin_unlock_irqrestore(&hvcs_pi_lock, flags);
+ return -EFAULT;
+ }
+ retval = hvcs_get_partner_info(unit_address, &head, hvcs_pi_buff);
+ if (retval) {
+ printk(KERN_ERR "HVCS: Failed to fetch partner"
+ " info for vty-server@%x.\n",unit_address);
+ spin_lock_irqsave(&hvcs_pi_lock, flags);
+ return retval;
+ }
+ spin_unlock_irqrestore(&hvcs_pi_lock, flags);
+
+ /* nixes the values if the partner vty went away */
+ hvcsd->p_unit_address = 0;
+ hvcsd->p_partition_ID = 0;
+
+ list_for_each_entry(pi, &head, node)
+ hvcs_set_pi(pi,hvcsd);
+
+ hvcs_free_partner_info(&head);
+ return 0;
+}
+
+/* This function is executed by the driver "rescan" sysfs entry */
+static int hvcs_rescan_devices_list(void)
+{
+ struct hvcs_struct *hvcsd = NULL;
+ unsigned long flags;
+
+ /* Locking issues? */
+ list_for_each_entry(hvcsd, &hvcs_structs, next) {
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcs_get_pi(hvcsd);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+
+ return 0;
+}
+
+/* Farm this off into its own function because it could be more complex once
+ * multiple partners support is added. called with spinlock held */
+static int hvcs_has_pi(struct hvcs_struct *hvcsd)
+{
+ if ((!hvcsd->p_unit_address) || (!hvcsd->p_partition_ID))
+ return 0;
+ return 1;
+}
+
+/* NOTE: It is possible that the super admin removed a partner vty and then
+ * added a different vty as the new partner.
+ *
+ * This function must be called with the hvcsd->lock held */
+static int hvcs_partner_connect(struct hvcs_struct *hvcsd)
+{
+ int retval;
+ unsigned int unit_address = hvcsd->vdev->unit_address;
+
+ /* If there wasn't any pi when the device was added it doesn't meant
+ * there isn't any now. This driver isn't notified when a new partner
+ * vty is added to a vty-server so we discover changes on our own.
+ * Please see comments in hvcs_register_connection() for justification
+ * of this bizarre code. */
+ retval = hvcs_register_connection(unit_address,
+ hvcsd->p_partition_ID,
+ hvcsd->p_unit_address);
+ if (!retval) {
+ hvcsd->connected = 1;
+ return 0;
+ } else if (retval != -EINVAL)
+ return retval;
+
+ /* As per the spec re-get the pi and try again if -EINVAL after the
+ * first connection attempt. */
+ if (hvcs_get_pi(hvcsd))
+ return -ENOMEM;
+
+ if (!hvcs_has_pi(hvcsd))
+ return -ENODEV;
+
+ retval = hvcs_register_connection(unit_address,
+ hvcsd->p_partition_ID,
+ hvcsd->p_unit_address);
+ if (retval != -EINVAL) {
+ hvcsd->connected = 1;
+ return retval;
+ }
+
+ /* EBUSY is the most likely scenario though the vty could have been
+ * removed or there really could be an hcall error due to the parameter
+ * data but thanks to ambiguous firmware return codes we can't really
+ * tell. */
+ printk(KERN_INFO "HVCS: vty-server or partner"
+ " vty is busy. Try again later.\n");
+ return -EBUSY;
+}
+
+/* This function must be called with the hvcsd->lock held */
+static void hvcs_partner_free(struct hvcs_struct *hvcsd)
+{
+ int retval;
+ do {
+ retval = hvcs_free_connection(hvcsd->vdev->unit_address);
+ } while (retval == -EBUSY);
+ hvcsd->connected = 0;
+}
+
+/* This helper function must be called WITHOUT the hvcsd->lock held */
+static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, unsigned int irq, struct vio_dev *vdev)
+{
+ unsigned long flags;
+
+ /* It is possible that the vty-server was removed between the time that
+ * the conn was registered and now. */
+ if (!request_irq(irq, &hvcs_handle_interrupt,
+ SA_INTERRUPT, "ibmhvcs", hvcsd)) {
+ /* It is possible the vty-server was removed after the irq was
+ * requested but before we have time to enable interrupts. */
+ if (vio_enable_interrupts(vdev) == H_Success)
+ return 0;
+ else {
+ printk(KERN_ERR "HVCS: int enable failed for"
+ " vty-server@%X.\n", unit_address);
+ free_irq(irq,hvcsd);
+ }
+ } else
+ printk(KERN_ERR "HVCS: irq req failed for"
+ " vty-server@%X.\n", unit_address);
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ hvcs_partner_free(hvcsd);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ return -ENODEV;
+
+}
+
+/* This always increments the kobject ref count if the call is successful.
+ * Please remember to dec when you are done with the instance. */
+struct hvcs_struct *hvcs_get_by_index(int index)
+{
+ struct hvcs_struct *hvcsd = NULL;
+ struct list_head *element;
+ struct list_head *safe_temp;
+ unsigned long flags;
+
+ /* We can immediately discard OOB requests */
+ if (index >= 0 && index < HVCS_MAX_SERVER_ADAPTERS) {
+ list_for_each_safe(element, safe_temp, &hvcs_structs) {
+ hvcsd = list_entry(element, struct hvcs_struct, next);
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ if (hvcsd->index == index) {
+ kobject_get(&hvcsd->kobj);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return hvcsd;
+ }
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ }
+ hvcsd = NULL;
+ }
+ return hvcsd;
+}
+
+/* This is invoked via the tty_open interface when a user app connects to the
+ * /dev node. */
+static int hvcs_open(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd = NULL;
+ int retval = 0;
+ unsigned long flags;
+ unsigned int irq;
+ struct vio_dev *vdev;
+ unsigned long unit_address;
+
+ if (tty->driver_data)
+ goto fast_open;
+
+ /* Is there a vty-server that shares the same index? */
+ /* This function increments the kobject index. */
+ if (!(hvcsd = hvcs_get_by_index(tty->index))) {
+ printk(KERN_WARNING "HVCS: open failed, no index.\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ if (hvcsd->connected == 0)
+ if ((retval = hvcs_partner_connect(hvcsd)))
+ goto error_release;
+
+ hvcsd->open_count = 1;
+ hvcsd->tty = tty;
+ tty->driver_data = hvcsd;
+
+ /* Set this driver to low latency so that we actually have a chance at
+ * catching a throttled TTY after we flip_buffer_push. Otherwise the
+ * flush_to_async may not execute until after the kernel_thread has
+ * yielded and resumed the next flip_buffer_push resulting in data
+ * loss.*/
+ tty->low_latency = 1;
+
+ memset(&hvcsd->buffer[0], 0x3F, HVCS_BUFF_LEN);
+
+ /* save these in the spinlock for the enable operations that need them
+ * outside of the spinlock. */
+ irq = hvcsd->vdev->irq;
+ vdev = hvcsd->vdev;
+ unit_address = hvcsd->vdev->unit_address;
+
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /* This must be done outside of the spinlock because it requests irqs
+ * and will grab the spinlcok and free the connection if it fails */
+ if ((hvcs_enable_device(hvcsd,unit_address,irq,vdev))) {
+ kobject_put(&hvcsd->kobj);
+ printk(KERN_WARNING "HVCS: enable device failed.\n");
+ return -ENODEV;
+ }
+
+ goto open_success;
+
+fast_open:
+ hvcsd = (struct hvcs_struct *)tty->driver_data;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ if (!kobject_get(&hvcsd->kobj)) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_ERR "HVCS: Kobject of open"
+ " hvcs doesn't exist.\n");
+ return -EFAULT; /* Is this the right return value? */
+ }
+
+ hvcsd->open_count++;
+
+ hvcsd->todo_mask |= HVCS_SCHED_READ;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+open_success:
+ hvcs_kick();
+
+ printk(KERN_INFO "HVCS: vty-server@%X opened.\n",
+ hvcsd->vdev->unit_address );
+
+ return 0;
+
+error_release:
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ kobject_put(&hvcsd->kobj);
+
+ printk(KERN_WARNING "HVCS: HVCS partner connect failed.\n");
+ return retval;
+}
+
+static void hvcs_close(struct tty_struct *tty, struct file *filp)
+{
+ struct hvcs_struct *hvcsd;
+ unsigned long flags;
+ struct kobject *kobjp;
+ /* Is someone trying to close the file associated with this device after
+ * we have hung up? If so tty->driver_data wouldn't be valid. */
+ if (tty_hung_up_p(filp))
+ return;
+
+ /* No driver_data means that this close was probably issued after a
+ * failed hvcs_open by the tty layer's release_dev() api and we can just
+ * exit cleanly. */
+ if (!tty->driver_data)
+ return;
+
+ hvcsd = (struct hvcs_struct *)tty->driver_data;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ if (--hvcsd->open_count == 0) {
+
+ /* This line is important because it tells hvcs_open that this
+ * device needs to be re-configured the next time hvcs_open is
+ * called. */
+ hvcsd->tty->driver_data = NULL;
+
+ /* NULL this early so that the kernel_thread doesn't try to
+ * execute any operations on the TTY even though it is obligated
+ * to deliver any pending I/O to the hypervisor. */
+ hvcsd->tty = NULL;
+
+ /* block the close until all the buffered data has been
+ * delivered. */
+
+ while(hvcsd->chars_in_buffer) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /* Give the kernel thread the hvcs_struct so that it can
+ * try to deliver the remaining data but block the close
+ * operation so that other tty operations have to wait.
+ * */
+ yield();
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ }
+
+ hvcs_final_close(hvcsd);
+
+ } else if (hvcsd->open_count < 0) {
+ printk(KERN_ERR "HVCS: vty-server@%X open_count: %d"
+ " is missmanaged.\n",
+ hvcsd->vdev->unit_address, hvcsd->open_count);
+ }
+ kobjp = &hvcsd->kobj;
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ kobject_put(kobjp);
+}
+
+static void hvcs_hangup(struct tty_struct * tty)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned long flags;
+ int temp_open_count;
+ struct kobject *kobjp;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ /* preserve this so that we know how many kobject refs to put */
+ temp_open_count = hvcsd->open_count;
+
+ /* Don't kobject put inside the spinlock because the destruction
+ * callback may use the spinlock and it may get called before the
+ * spinlock has been released. Get a pointer to the kobject and
+ * kobject_put on that instead.
+ */
+ kobjp = &hvcsd->kobj;
+
+ /* Calling this will drop any buffered data on the floor. */
+ hvcs_final_close(hvcsd);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ /* We need to kobject_put() for every open_count we have since the
+ * tty_hangup() function doesn't invoke a close per open connection on a
+ * non-console device. */
+ while(temp_open_count) {
+ --temp_open_count;
+ /* The final put will trigger destruction of the hvcs_struct.
+ * NOTE: If this hangup was signaled from user space then the
+ * final put will never happen. */
+ kobject_put(kobjp);
+ }
+}
+
+/*NOTE: This is almost always from_user since user level apps interact with the
+ * /dev nodes. I'm trusting that if hvcs_write gets called and interrupted by
+ * hvcs_remove (which removes the target device and executes tty_hangup()) that
+ * tty_hangup will allow hvcs_write time to complete execution before it
+ * terminates our device. */
+static int hvcs_write(struct tty_struct *tty, int from_user, const unsigned char *buf, int count)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned int unit_address;
+ unsigned char *charbuf;
+ unsigned long flags;
+ int total_sent = 0;
+ int tosend = 0;
+ int result = 0;
+
+ /* If they don't check the return code off of their open they may
+ * attempt this even if there is no connected device. */
+ if (!hvcsd)
+ return -ENODEV;
+
+ /* Reasonable size to prevent user level flooding */
+ if (count > HVCS_MAX_FROM_USER) {
+ printk(KERN_WARNING "HVCS write: count being truncated to"
+ " HVCS_MAX_FROM_USER.\n");
+ count = HVCS_MAX_FROM_USER;
+ }
+
+ if (!from_user)
+ charbuf = (unsigned char *)buf;
+ else {
+ charbuf = kmalloc(count, GFP_KERNEL);
+ if (!charbuf) {
+ printk(KERN_WARNING "HVCS: write -ENOMEM.\n");
+ return -ENOMEM;
+ }
+
+ if (copy_from_user(charbuf,buf,count)) {
+ kfree(charbuf);
+ printk(KERN_WARNING "HVCS: write -EFAULT.\n");
+ return -EFAULT;
+ }
+ }
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ /* Somehow an open succedded but the device was removed or the
+ * connection terminated between the vty-server and partner vty during
+ * the middle of a write operation? This is a crummy place to do this
+ * but we want to keep it all in the spinlock. */
+ if (hvcsd->open_count <= 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ if (from_user)
+ kfree(charbuf);
+ return -ENODEV;
+ }
+
+ unit_address = hvcsd->vdev->unit_address;
+
+ while (count > 0) {
+ tosend = min(count, (HVCS_BUFF_LEN - hvcsd->chars_in_buffer));
+ /* no more space, this probably means that the last call to
+ * hvcs_write() didn't succeed and the buffer was filled up. */
+ if (!tosend)
+ break;
+
+ memcpy(&hvcsd->buffer[hvcsd->chars_in_buffer],
+ &charbuf[total_sent],
+ tosend);
+
+ hvcsd->chars_in_buffer += tosend;
+
+ result = 0;
+ /* if this is true then we don't want to try writing to the
+ * hypervisor because that is the kernel_threads job now. We'll
+ * just add to the buffer.*/
+ if (!(hvcsd->todo_mask & HVCS_TRY_WRITE))
+ /* won't send partial writes */
+ result = hvc_put_chars(unit_address,
+ &hvcsd->buffer[0],
+ hvcsd->chars_in_buffer);
+
+ /* since we know we have enough room in hvcsd->buffer for
+ * tosend we record that it was sent regardless of whether the
+ * hypervisor actually took it because we have it buffered.*/
+ total_sent+=tosend;
+ count-=tosend;
+ if (result == 0) {
+ hvcsd->todo_mask |= HVCS_TRY_WRITE;
+ hvcs_kick();
+ break;
+ }
+
+ hvcsd->chars_in_buffer = 0;
+ /* test after the chars_in_buffer reset otherwise this could
+ * deadlock our writes if hvc_put_chars fails. */
+ if (result < 0)
+ break;
+ }
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ if (from_user)
+ kfree(charbuf);
+
+ if (result == -1)
+ return -EIO;
+ else
+ return total_sent;
+}
+
+/* This is really asking how much can we guarentee that we can send or that we
+ * absolutely WILL BUFFER if we can't send it. This driver MUST honor the
+ * return value, hence the reason for hvcs_struct buffering. */
+static int hvcs_write_room(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned long flags;
+ int retval;
+
+ if (!hvcsd || hvcsd->open_count <= 0)
+ return 0;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = HVCS_BUFF_LEN - hvcsd->chars_in_buffer;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+
+static int hvcs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct hvcs_struct *hvcsd = (struct hvcs_struct *)tty->driver_data;
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = hvcsd->chars_in_buffer;
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+
+static struct tty_operations hvcs_ops = {
+ .open = hvcs_open,
+ .close = hvcs_close,
+ .hangup = hvcs_hangup,
+ .write = hvcs_write,
+ .write_room = hvcs_write_room,
+ .chars_in_buffer = hvcs_chars_in_buffer,
+ .unthrottle = hvcs_unthrottle,
+ .throttle = hvcs_throttle,
+};
+
+static int __init hvcs_module_init(void)
+{
+ int rc;
+ int num_ttys_to_alloc;
+
+ printk(KERN_INFO "Initializing %s\n", hvcs_driver_string);
+
+ /* Has the user specified an overload with an insmod param? */
+ if (hvcs_parm_num_devs <= 0 ||
+ (hvcs_parm_num_devs > HVCS_MAX_SERVER_ADAPTERS)) {
+ num_ttys_to_alloc = HVCS_DEFAULT_SERVER_ADAPTERS;
+ } else
+ num_ttys_to_alloc = hvcs_parm_num_devs;
+
+ hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc);
+ if (!hvcs_tty_driver)
+ return -ENOMEM;
+
+ init_waitqueue_head(&hvcs_wait_queue);
+
+ hvcs_tty_driver->owner = THIS_MODULE;
+
+ hvcs_tty_driver->driver_name = hvcs_driver_name;
+ hvcs_tty_driver->name = hvcs_device_node;
+
+ /* We'll let the system assign us a major number, indicated by leaving
+ * it blank */
+
+ hvcs_tty_driver->minor_start = HVCS_MINOR_START;
+ hvcs_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM;
+
+ /* We role our own so that we DONT ECHO. We can't echo because the
+ * device we are connecting to already echoes by default and this would
+ * throw us into a horrible recursive echo-echo-echo loop. */
+ hvcs_tty_driver->init_termios = hvcs_tty_termios;
+ hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW;
+
+ tty_set_operations(hvcs_tty_driver, &hvcs_ops);
+
+ /* The following call will result in sysfs entries that denote the
+ * dynamically assigned major and minor numbers for our devices. */
+ if (tty_register_driver(hvcs_tty_driver)) {
+ printk(KERN_ERR "HVCS: registration "
+ " as a tty driver failed.\n");
+ put_tty_driver(hvcs_tty_driver);
+ return rc;
+ }
+
+ hvcs_pi_lock = SPIN_LOCK_UNLOCKED;
+ hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL);
+
+ init_completion(&hvcs_exited);
+ hvcs_thread_pid = kernel_thread(khvcsd, NULL, CLONE_KERNEL);
+
+ rc = vio_register_driver(&hvcs_vio_driver);
+
+ /* This needs to be done AFTER the vio_register_driver() call or else
+ * the kobjects won't be initialized properly. */
+ hvcs_create_driver_attrs();
+
+ printk(KERN_INFO "HVCS: driver module inserted.\n");
+
+ return rc;
+}
+
+static void __exit hvcs_module_exit(void)
+{
+ unsigned long flags;
+
+ /* This driver receives remove callbacks for each device upon module
+ * removal. */
+
+ kill_proc(hvcs_thread_pid, SIGTERM, 1);
+ wake_up_interruptible(&hvcs_wait_queue);
+ wait_for_completion(&hvcs_exited);
+
+ spin_lock_irqsave(&hvcs_pi_lock, flags);
+ kfree(hvcs_pi_buff);
+ hvcs_pi_buff = NULL;
+ spin_unlock_irqrestore(&hvcs_pi_lock, flags);
+
+ hvcs_remove_driver_attrs();
+
+ vio_unregister_driver(&hvcs_vio_driver);
+
+ tty_unregister_driver(hvcs_tty_driver);
+
+ put_tty_driver(hvcs_tty_driver);
+
+ printk(KERN_INFO "HVCS: driver module removed.\n");
+}
+
+module_init(hvcs_module_init);
+module_exit(hvcs_module_exit);
+
+static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod)
+{
+ return (struct hvcs_struct *)viod->dev.driver_data;
+}
+/* The sysfs interface for the driver and devices */
+
+static ssize_t hvcs_partner_vtys_show(struct device *dev, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%X\n", hvcsd->p_unit_address);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+static DEVICE_ATTR(partner_vtys, S_IRUGO, hvcs_partner_vtys_show, NULL);
+
+static ssize_t hvcs_partner_clcs_show(struct device *dev, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+static DEVICE_ATTR(partner_clcs, S_IRUGO, hvcs_partner_clcs_show, NULL);
+
+static ssize_t hvcs_current_vty_store(struct device *dev, const char * buf, size_t count)
+{
+ /* Don't need this feature at the present time because firmware doesn't
+ * yet support multiple partners. */
+ printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n");
+ return -EPERM;
+}
+
+static ssize_t hvcs_current_vty_show(struct device *dev, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return retval;
+}
+
+static DEVICE_ATTR(current_vty,
+ S_IRUGO | S_IWUSR, hvcs_current_vty_show, hvcs_current_vty_store);
+
+static ssize_t hvcs_vterm_state_store(struct device *dev, const char *buf, size_t count)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+
+ /* writing a '0' to this sysfs entry will result in the disconnect. */
+ if (simple_strtol(buf,NULL,0) != 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+
+ if (hvcsd->open_count > 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_INFO "HVCS: vterm state unchanged. "
+ "The hvcs device node is still in use.\n");
+ return -EPERM;
+ }
+
+ if (hvcsd->connected == 0) {
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ printk(KERN_INFO "HVCS: vterm state unchanged. The"
+ " vty-server is not connected to a vty.\n");
+ return -EPERM;
+ }
+
+ hvcs_partner_free(hvcsd);
+ printk(KERN_INFO "HVCS: Closed vty-server@%X and"
+ " partner vty@%X:%d connection.\n",
+ hvcsd->vdev->unit_address,
+ hvcsd->p_unit_address,
+ (unsigned int)hvcsd->p_partition_ID);
+
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+ return count;
+}
+
+static ssize_t hvcs_vterm_state_show(struct device *dev, char *buf)
+{
+ struct vio_dev *viod = to_vio_dev(dev);
+ struct hvcs_struct *hvcsd = from_vio_dev(viod);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&hvcsd->lock, flags);
+ retval = sprintf(buf, "%d\n", hvcsd->connected);
+ spin_unlock_irqrestore(&hvcsd->lock, flags);
+
+ return retval;
+}
+static DEVICE_ATTR(vterm_state, S_IRUGO | S_IWUSR, hvcs_vterm_state_show, hvcs_vterm_state_store);
+
+static struct attribute *hvcs_attrs[] = {
+ &dev_attr_partner_vtys.attr,
+ &dev_attr_partner_clcs.attr,
+ &dev_attr_current_vty.attr,
+ &dev_attr_vterm_state.attr,
+ NULL,
+};
+
+static struct attribute_group hvcs_attr_group = {
+ .attrs = hvcs_attrs,
+};
+
+static void hvcs_create_device_attrs(struct hvcs_struct *hvcsd)
+{
+ struct vio_dev *vdev = hvcsd->vdev;
+ sysfs_create_group(&vdev->dev.kobj, &hvcs_attr_group);
+}
+
+static void hvcs_remove_device_attrs(struct vio_dev *vdev)
+{
+ sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group);
+}
+
+static ssize_t hvcs_rescan_show(struct device_driver *ddp, char *buf)
+{
+ /* A 1 means it is updating, a 0 means it is done updating */
+ return snprintf(buf, PAGE_SIZE, "%d\n", hvcs_rescan_status);
+}
+
+static ssize_t hvcs_rescan_store(struct device_driver *ddp, const char * buf, size_t count)
+{
+ if ((simple_strtol(buf,NULL,0) != 1)
+ && (hvcs_rescan_status != 0))
+ return -EINVAL;
+
+ hvcs_rescan_status = 1;
+ printk(KERN_INFO "HVCS: rescanning partner info for all"
+ " vty-servers.\n");
+ hvcs_rescan_devices_list();
+ hvcs_rescan_status = 0;
+ return count;
+}
+static DRIVER_ATTR(rescan,
+ S_IRUGO | S_IWUSR, hvcs_rescan_show, hvcs_rescan_store);
+
+static void hvcs_create_driver_attrs(void)
+{
+ struct device_driver *driverfs = &(hvcs_vio_driver.driver);
+ driver_create_file(driverfs, &driver_attr_rescan);
+}
+
+static void hvcs_remove_driver_attrs(void)
+{
+ struct device_driver *driverfs = &(hvcs_vio_driver.driver);
+ driver_remove_file(driverfs, &driver_attr_rescan);
+}
diff -uNr linux-2.6.7/Documentation/powerpc/hvcs.txt hvcs_working_linux-2.6.7/Documentation/powerpc/hvcs.txt
--- linux-2.6.7/Documentation/powerpc/hvcs.txt Wed Dec 31 18:00:00 1969
+++ hvcs_working_linux-2.6.7/Documentation/powerpc/hvcs.txt Thu Jul 22 17:28:52 2004
@@ -0,0 +1,534 @@
+===========================================================================
+ HVCS
+ IBM "Hypervisor Virtual Console Server" Installation Guide
+ for Linux Kernel 2.6.4+
+ Copyright (C) 2004 IBM Corporation
+
+===========================================================================
+NOTE:Eight space tabs are the optimum editor setting for reading this file.
+===========================================================================
+
+ Author(s) : Ryan S. Arnold <rsa@xxxxxxxxxx>
+ Date Created: March, 02, 2004
+ Last Changed: July, 07, 2004
+
+---------------------------------------------------------------------------
+Table of contents:
+
+ 1. Driver Introduction:
+ 2. System Requirements
+ 3. Build Options:
+ 3.1 Built-in:
+ 3.2 Module:
+ 4. Installation:
+ 5. Connection:
+ 6. Disconnection:
+ 7. Configuration:
+ 8. Questions & Answers:
+ 9. Reporting Bugs:
+
+---------------------------------------------------------------------------
+1. Driver Introduction:
+
+This is the device driver for the IBM Hypervisor Virtual Console Server,
+"hvcs". The IBM hvcs provides a tty driver interface to allow Linux user
+space applications access to the system consoles of logically partitioned
+operating systems (Linux and AIX) running on the same partitioned Power5
+ppc64 system. Physical hardware consoles per partition are not practical
+on this hardware so system consoles are accessed by this driver using
+firmware interfaces to virtual terminal devices.
+
+---------------------------------------------------------------------------
+2. System Requirements:
+
+This device driver was written using 2.6.4 Linux kernel APIs and will only
+build and run on kernels of this version or later.
+
+This driver was written to operate solely on IBM Power5 ppc64 hardware
+though some care was taken to abstract the architecture dependent firmware
+calls from the driver code.
+
+Sysfs must be mounted on the system so that the user can determine which
+major and minor numbers are associated with each vty-server. Directions
+for sysfs mounting are outside the scope of this document.
+
+---------------------------------------------------------------------------
+3. Build Options:
+
+The hvcs driver registers itself as a tty driver. The tty layer
+dynamically allocates a block of major and minor numbers in a quantity
+requested by the registering driver. The hvcs driver asks the tty layer
+for 64 of these major/minor numbers by default to use for hvcs device node
+entries.
+
+If the default number of device entries is adequate then this driver can be
+built into the kernel. If not, the default can be over-ridden by inserting
+the driver as a module with insmod parameters.
+
+---------------------------------------------------------------------------
+3.1 Built-in:
+
+The following menuconfig example demonstrates selecting to build this
+driver into the kernel.
+
+ Device Drivers --->
+ Character devices --->
+ <*> IBM Hypervisor Virtual Console Server Support
+
+Begin the kernel make process.
+
+---------------------------------------------------------------------------
+3.2 Module:
+
+The following menuconfig example demonstrates selecting to build this
+driver as a kernel module.
+
+ Device Drivers --->
+ Character devices --->
+ <M> IBM Hypervisor Virtual Console Server Support
+
+The make process will build the following kernel modules:
+
+ hvcs.ko
+ hvcserver.ko
+
+To insert the module with the default allocation execute the following
+commands in the order they appear:
+
+ insmod hvcserver.ko
+ insmod hvcs.ko
+
+The hvcserver module contains architecture specific firmware calls and must
+be inserted first, otherwise the hvcs module will not find some of the
+symbols it expects.
+
+To override the default use an insmod parameter as follows (requesting 4
+tty devices as an example):
+
+ insmod hvcs.ko hvcs_parm_num_devs=4
+
+There is a maximum number of dev entries that can be specified on insmod.
+We think that 1024 is currently a decent maximum number of server adapters
+to allow. This can always be changed by modifying the constant in the
+source file before building.
+
+NOTE: The length of time it takes to insmod the driver seems to be related
+to the number of tty interfaces the registering driver requests.
+
+In order to remove the driver module execute the following command:
+
+ rmmod hvcs.ko
+
+The recommended method for installing hvcs as a module is to use depmod to
+build a current modules.dep file in /lib/modules/`uname -r` and then
+execute:
+
+modprobe hvcs hvcs_parm_num_devs=4
+
+The modules.dep file indicates that hvcserver.ko needs to be inserted
+before hvcs.ko and modprobe uses this file to smartly insert the modules in
+the proper order.
+
+The following modprobe command is used to remove hvcs and hvcserver in the
+proper order:
+
+modprobe -r hvcs
+
+---------------------------------------------------------------------------
+4. Installation:
+
+The tty layer creates sysfs entries which contain the major and minor
+numbers allocated for the hvcs driver. The following snippet of "tree"
+output of the sysfs directory shows where these numbers are presented:
+
+ sys/
+ |-- *other sysfs base dirs*
+ |
+ |-- class
+ | |-- *other classes of devices*
+ | |
+ | `-- tty
+ | |-- *other tty devices*
+ | |
+ | |-- hvcs0
+ | | `-- dev
+ | |-- hvcs1
+ | | `-- dev
+ | |-- hvcs2
+ | | `-- dev
+ | |-- hvcs3
+ | | `-- dev
+ | |
+ | |-- *other tty devices*
+ |
+ |-- *other sysfs base dirs*
+
+For the above examples the following output is a result of cat'ing the
+"dev" entry in the hvcs directory:
+
+ Pow5:/sys/class/tty/hvcs0/ # cat dev
+ 254:0
+
+ Pow5:/sys/class/tty/hvcs1/ # cat dev
+ 254:1
+
+ Pow5:/sys/class/tty/hvcs2/ # cat dev
+ 254:2
+
+ Pow5:/sys/class/tty/hvcs3/ # cat dev
+ 254:3
+
+The output from reading the "dev" attribute is the char device major and
+minor numbers that the tty layer has allocated for this driver's use. Most
+systems running hvcs will already have the device entries created or udev
+will do it automatically.
+
+Given the example output above, to manually create a /dev/hvcs* node entry
+mknod can be used as follows:
+
+ mknod /dev/hvcs0 c 254 0
+ mknod /dev/hvcs1 c 254 1
+ mknod /dev/hvcs2 c 254 2
+ mknod /dev/hvcs3 c 254 3
+
+Using mknod to manually create the device entries makes these device nodes
+persistent. Once created they will exist prior to the driver insmod.
+
+Attempting to connect an application to /dev/hvcs* prior to insertion of
+the hvcs module will result in an error message similar to the following:
+
+ "/dev/hvcs*: No such device".
+
+NOTE: Just because there is a device node present doesn't mean that there
+is a vty-server device configured for that node.
+
+---------------------------------------------------------------------------
+5. Connection
+
+Since this driver controls devices that provide a tty interface a user can
+interact with the device node entries using any standard tty-interactive
+method (e.g. "cat", "dd", "echo"). The intent of this driver however, is
+to provide real time console interaction with a Linux partition's console,
+which requires the use of applications that provide bi-directional,
+interactive I/O with a tty device.
+
+Applications (e.g. "minicom" and "screen") that act as terminal emulators
+or perform terminal type control sequence conversion on the data being
+passed through them are NOT acceptable for providing interactive console
+I/O. These programs often emulate antiquated terminal types (vt100 and
+ANSI) and expect inbound data to take the form of one of these supported
+terminal types but they either do not convert, or do not _adequately_
+convert, outbound data into the terminal type of the terminal which invoked
+them (though screen makes an attempt and can apparently be configured with
+much termcap wrestling.)
+
+For this reason kermit and cu are two of the recommended applications for
+interacting with a Linux console via an hvcs device. These programs simply
+act as a conduit for data transfer to and from the tty device. They do not
+require inbound data to take the form of a particular terminal type, nor do
+they cook outbound data to a particular terminal type.
+
+In order to ensure proper functioning of console applications one must make
+sure that once connected to a /dev/hvcs console that the console's $TERM
+env variable is set to the exact terminal type of the terminal emulator
+used to launch the interactive I/O application. If one is using xterm and
+kermit to connect to /dev/hvcs0 when the console prompt becomes available
+one should "export TERM=xterm" on the console. This tells ncurses
+applications that are invoked from the console that they should output
+control sequences that xterm can understand.
+
+As a precautionary measure an hvcs user should always "exit" from their
+session before disconnecting an application such as kermit from the device
+node. If this is not done, the next user to connect to the console will
+continue using the previous user's logged in session which includes
+using the $TERM variable that the previous user supplied.
+
+---------------------------------------------------------------------------
+6. Disconnection
+
+As a security feature to prevent the delivery of stale data to an
+unintended target the Power5 system firmware disables the fetching of data
+and discards that data when a connection between a vty-server and a vty has
+been severed. As an example, when a vty-server is immediately disconnected
+from a vty following output of data to the vty the vty adapter may not have
+enough time between when it received the data interrupt and when the
+connection was severed to fetch the data from firmware before the fetch is
+disabled by firmware.
+
+When hvcs is being used to serve consoles this behavior is not a huge issue
+because the adapter stays connected for large amounts of time following
+almost all data writes. When hvcs is being used as a tty conduit to tunnel
+data between two partitions [see Q & A below] this is a huge problem
+because the standard Linux behavior when cat'ing or dd'ing data to a device
+is to open the tty, send the data, and then close the tty. If this driver
+manually terminated vty-server connections on tty close this would close
+the vty-server and vty connection before the target vty has had a chance to
+fetch the data.
+
+Additionally, disconnecting a vty-server and vty only on module removal or
+adapter removal is impractical because other vty-servers in other
+partitions may require the usage of the target vty at any time.
+
+Due to this behavioral restriction disconnection of vty-servers from the
+connected vty is a manual procedure using a write to a sysfs attribute
+outlined below, on the other hand the initial vty-server connection to a
+vty is established automatically by this driver. Manual vty-server
+connection is never required.
+
+In order to terminate the connection between a vty-server and vty the
+"vterm_state" sysfs attribute within each vty-server's sysfs entry is used.
+Reading this attribute reveals the current connection state of the
+vty-server adapter. A zero means that the vty-server is not connected to a
+vty. A one indicates that a connection is active.
+
+Writing a '0' (zero) to the vterm_state attribute will disconnect the VTERM
+connection between the vty-server and target vty ONLY if the vterm_state
+previously read '1'. The write directive is ignored if the vterm_state
+read '0' or if any value other than '0' was written to the vterm_state
+attribute. The following example will show the method used for verifying
+the vty-server connection status and disconnecting a vty-server connection.
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
+ 1
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo 0 > vterm_state
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
+ 0
+
+All vty-server connections are automatically terminated when the device is
+hotplug removed and when the module is removed.
+
+---------------------------------------------------------------------------
+7. Configuration
+
+Each vty-server has a sysfs entry in the /sys/devices/vio directory, which
+is symlinked in several other sysfs tree directories, notably under the
+hvcs driver entry, which looks like the following example:
+
+ Pow5:/sys/bus/vio/drivers/hvcs # ls
+ . .. 30000003 30000004 rescan
+
+By design, firmware notifies the hvcs driver of vty-server lifetimes and
+partner vty removals but not the addition of partner vtys. Since an HMC
+Super Admin can add partner info dynamically we have provided the hvcs
+driver sysfs directory with the "rescan" update attribute which will query
+firmware and update the partner info for all the vty-servers that this
+driver manages. Writing a '1' to the attribute triggers the update. An
+explicit example follows:
+
+ Pow5:/sys/bus/vio/drivers/hvcs # echo 1 > rescan
+
+Reading the attribute will indicate a state of '1' or '0'. A one indicates
+that an update is in process. A zero indicates that an update has
+completed or was never executed.
+
+Vty-server entries in this directory are a 32 bit partition unique unit
+address that is created by firmware. An example vty-server sysfs entry
+looks like the following:
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
+ . current_vty devspec partner_clcs vterm_state
+ .. detach_state name partner_vtys
+
+Each entry is provided, by default with a "name" attribute. Reading the
+"name" attribute will reveal the device type as shown in the following
+example:
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000003 # cat name
+ vty-server
+
+Each entry is also provided, by default, with a "devspec" attribute which
+reveals the full device specification when read, as shown in the following
+example:
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat devspec
+ /vdevice/vty-server@30000004
+
+Each vty-server sysfs dir is provided with two read-only attributes that
+provide lists of easily parsed partner vty data: "partner_vtys" and
+"partner_clcs".
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_vtys
+ 30000000
+ 30000001
+ 30000002
+ 30000000
+ 30000000
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_clcs
+ U5112.428.103048A-V3-C0
+ U5112.428.103048A-V3-C2
+ U5112.428.103048A-V3-C3
+ U5112.428.103048A-V4-C0
+ U5112.428.103048A-V5-C0
+
+Reading partner_vtys returns a list of partner vtys. Vty unit address
+numbering is only per-partition-unique so entries will frequently repeat.
+
+Reading partner_clcs returns a list of "converged location codes" which are
+composed of a system serial number followed by "-V*", where the '*' is the
+target partition number, and "-C*", where the '*' is the slot of the
+adapter. The first vty partner corresponds to the first clc item, the
+second vty partner to the second clc item, etc.
+
+A vty-server can only be connected to a single vty at a time. The entry,
+"current_vty" prints the clc of the currently selected partner vty when
+read.
+
+The current_vty can be changed by writing a valid partner clc to the entry
+as in the following example:
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo U5112.428.10304
+ 8A-V4-C0 > current_vty
+
+Changing the current_vty when a vty-server is already connected to a vty
+does not affect the current connection. The change takes effect when the
+currently open connection is freed.
+
+Information on the "vterm_state" attribute was covered earlier on the
+chapter entitled "disconnection".
+
+---------------------------------------------------------------------------
+8. Questions & Answers:
+===========================================================================
+Q: What are the security concerns involving hvcs?
+
+A: There are three main security concerns:
+
+ 1. The creator of the /dev/hvcs* nodes has the ability to restrict
+ the access of the device entries to certain users or groups. It
+ may be best to create a special hvcs group privilege for providing
+ access to system consoles.
+
+ 2. To provide network security when grabbing the console it is
+ suggested that the user connect to the console hosting partition
+ using a secure method, such as SSH or sit at a hardware console.
+
+ 3. Make sure to exit the user session when done with a console or
+ the next vty-server connection (which may be from another
+ partition) will experience the previously logged in session.
+
+---------------------------------------------------------------------------
+Q: How do I multiplex a console that I grab through hvcs so that other
+people can see it:
+
+A: You can use "screen" to directly connect to the /dev/hvcs* device and
+setup a session on your machine with the console group privileges. As
+pointed out earlier by default screen doesn't provide the termcap settings
+for most terminal emulators to provide adequate character conversion from
+term type "screen" to others. This means that curses based programs may
+not display properly in screen sessions.
+
+---------------------------------------------------------------------------
+Q: Why are the colors all messed up?
+Q: Why are the control characters acting strange or not working?
+Q: Why is the console output all strange and unintelligible?
+
+A: Please see the preceding section on "Connection" for a discussion of how
+applications can affect the display of character control sequences.
+Additionally, just because you logged into the console using and xterm
+doesn't mean someone else didn't log into the console with the HMC console
+(vt320) before you and leave the session logged in. The best thing to do
+is to export TERM to the terminal type of your terminal emulator when you
+get the console. Additionally make sure to "exit" the console before you
+disconnect from the console. This will ensure that the next user gets
+their own TERM type set when they login.
+
+---------------------------------------------------------------------------
+Q: When I try to CONNECT kermit to an hvcs device I get:
+"Sorry, can't open connection: /dev/hvcs*"What is happening?
+
+A: Some other Power5 console mechanism has a connection to the vty and
+isn't giving it up. You can try to force disconnect the consoles from the
+HMC by right clicking on the partition and then selecting "close terminal".
+Otherwise you have to hunt down the people who have console authority. It
+is possible that you already have the console open using another kermit
+session and just forgot about it. Please review the console options for
+Power5 systems to determine the many ways a system console can be held.
+
+OR
+
+A: Another user may not have a connectivity method currently attached to a
+/dev/hvcs device but the vterm_state may reveal that they still have the
+vty-server connection established. They need to free this using the method
+outlined in the section on "Disconnection" in order for others to connect
+to the target vty.
+
+OR
+
+A: The user profile you are using to execute kermit probably doesn't have
+permissions to use the /dev/hvcs* device.
+
+OR
+
+A: You probably haven't inserted the hvcs.ko module yet but the /dev/hvcs*
+entry still exists (on systems without udev).
+
+OR
+
+A: There is not a corresponding vty-server device that maps to an existing
+/dev/hvcs* entry.
+
+---------------------------------------------------------------------------
+Q: When I try to CONNECT kermit to an hvcs device I get:
+"Sorry, write access to UUCP lockfile directory denied."
+
+A: The /dev/hvcs* entry you have specified doesn't exist where you said it
+does? Maybe you haven't inserted the module (on systems with udev).
+
+---------------------------------------------------------------------------
+Q: If I already have one Linux partition installed can I use hvcs on said
+partition to provide the console for the install of a second Linux
+partition?
+
+A: Yes granted that your are connected to the /dev/hvcs* device using
+kermit or cu or some other program that doesn't provide terminal emulation.
+
+---------------------------------------------------------------------------
+Q: Can I connect to more than one partition's console at a time using this
+driver?
+
+A: Yes. Of course this means that there must be more than one vty-server
+configured for this partition and each must point to a disconnected vty.
+
+---------------------------------------------------------------------------
+Q: Does the hvcs driver support dynamic (hotplug) addition of devices?
+
+A: Yes, if you have dlpar and hotplug enabled for your system and it has
+been built into the kernel the hvcs drivers is configured to dynamically
+handle additions of new devices and removals of unused devices.
+
+---------------------------------------------------------------------------
+Q: Can I use /dev/hvcs* as a conduit to another partition and use a tty
+device on that partition as the other end of the pipe?
+
+A: Yes, on Power5 platforms the hvc_console driver provides a tty interface
+for extra /dev/hvc* devices (where /dev/hvc0 is most likely the console).
+In order to get a tty conduit working between the two partitions the HMC
+Super Admin must create an additional "serial server" for the target
+partition with the HMC gui which will show up as /dev/hvc* when the target
+partition is rebooted.
+
+The HMC Super Admin then creates an additional "serial client" for the
+current partition and points this at the target partition's newly created
+"serial server" adapter (remember the slot). This shows up as an
+additional /dev/hvcs* device.
+
+Now a program on the target system can be configured to read or write to
+/dev/hvc* and another program on the current partition can be configured to
+read or write to /dev/hvcs*. Now you have a tty conduit between two
+partitions.
+
+---------------------------------------------------------------------------
+9. Reporting Bugs:
+
+The proper channel for reporting bugs is either through the Linux OS
+distribution company that provided your OS or by posting issues to the
+ppc64 development mailing list at:
+
+linuxppc64-dev@xxxxxxxxxxxxxxxxxx
+
+This request is to provide a documented and searchable public exchange
+of the problems and solutions surrounding this driver for the benefit of
+all users.