[patch] Re: 2.6.7-mm1 linker trouble with CONFIG_FB_RIVA_I2C=y and modular I2C

From: Adrian Bunk
Date: Mon Jun 21 2004 - 10:32:37 EST


On Mon, Jun 21, 2004 at 04:06:27AM +0200, Matthias Andree wrote:
> On Sun, 20 Jun 2004, Andrew Morton wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7/2.6.7-mm1/
>
> This version causes linker trouble with
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> CONFIG_FB_RIVA_I2C=y
>
> CC init/version.o
> LD init/built-in.o
> LD .tmp_vmlinux1
> drivers/built-in.o(.text+0xda101): In function `riva_setup_i2c_bus':
> : undefined reference to `i2c_bit_add_bus'
> drivers/built-in.o(.text+0xda218): In function `riva_delete_i2c_busses':
> : undefined reference to `i2c_bit_del_bus'
> drivers/built-in.o(.text+0xda237): In function `riva_delete_i2c_busses':
> : undefined reference to `i2c_bit_del_bus'
> drivers/built-in.o(.text+0xda2c9): In function `riva_do_probe_i2c_edid':
> : undefined reference to `i2c_transfer'
> make: *** [.tmp_vmlinux1] Error 1
>...

Thanks for this report.

The problem is:
FB_RIVA=y
FB_RIVA_I2C=y
I2C=m
I2C_ALGOBIT=m

The patch below fixes this.

Besides this, it contains:
- help text by Antonino A. Daplas
- converted spaces to tabs
- it was forgotten that FB_RIVA_I2C requires I2C_ALGOBIT

> Matthias Andree

cu
Adrian

--- linux-2.6.7-mm1-modular/drivers/video/Kconfig.old 2004-06-21 17:09:57.000000000 +0200
+++ linux-2.6.7-mm1-modular/drivers/video/Kconfig 2004-06-21 17:26:57.000000000 +0200
@@ -424,6 +424,8 @@
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
+ select I2C_ALGOBIT if FB_RIVA_I2C
+ select I2C if FB_RIVA_I2C
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
@@ -433,9 +435,17 @@
module will be called rivafb.

config FB_RIVA_I2C
- bool "Enable DDC Support"
- depends on FB_RIVA && I2C
- help
+ bool "Enable DDC Support"
+ depends on FB_RIVA
+ help
+ This enables I2C support for nVidia Chipsets. This is used
+ only for getting EDID information from the attached display
+ allowing for robust video mode handling and switching.
+
+ Because fbdev-2.6 requires that drivers must be able to
+ independently validate video mode parameters, you should say Y
+ here.
+

config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/