sata promise problems on x86_64

[Miroslav Ruda]

Hello,

I have problems with SATA promise driver from  2.4.27-rc1 on x86_64 arch (MB ASUS SK8V).
Kernel 2.4.27-rc1 reports

scsi0: SCSI host adapter emulation for IDE ATAPI devices
ata1: SATA max UDMA/133 ...
ata2: SATA max UDMA/133 ...
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors
ata1: dev 0 configured for UDMA/133
ata2: no device found (phy stat 00000000)
scsi1: sata_promise
scsi2: sata_promise
Vendor: ATA       Model: WDC WD800JD-00HK  Rev: 13.0
Type:   Direct-Access                      ANSI SCSI revision: 05
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
Partition check:
sda: <3>ata1: DMA timeout

and is frozen, while with 2.6.5 it works ok:

SCSI subsystem initialized
libata version 1.02 loaded.
sata_promise version 0.92
ata1: SATA max UDMA/133 cmd 0xFFFFFF000205F200 ctl 0xFFFFFF000205F238 bmdma 0x0 
irq 18
ata2: SATA max UDMA/133 cmd 0xFFFFFF000205F280 ctl 0xFFFFFF000205F2B8 bmdma 0x0 
irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: no device found (phy stat 00000000)
ata2: thread exiting
scsi1 : sata_promise
 Vendor: ATA       Model: WDC WD800JD-00HK  Rev: 1.02
 Type:   Direct-Access                      ANSI SCSI revision: 05
ata1: dev 0 max request 124KB
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

Any idea what's wrong?
--
                 Mirek Ruda 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/