Re: 2.6.7-rc2-mm1

From: Sid Boyce
Date: Thu Jun 03 2004 - 08:19:14 EST


Andrew Morton wrote:

Sid Boyce <sboyce@xxxxxxxxxxxxxxxx> wrote:


As with 2.6.7-rc1-mm1, I'm seeing the same problem on 2.6.7-rc2-mm1. 2.6.7-rc1 and 2.6.7-rc2 are OK. It hangs needing a hard reset setting up /dev/pts, with console=ttyS1 .... same as before. SuSE 9.1 on A7N8X-E nforce2 chipset.



Works OK here. Is it the `console=ttyS1' which is causing the hang? If
not, what? Try removing boot options, stripping config options, etc.





Bjorn Helgaas also wrote:

Can you send me the dmesg from a 2.6.7-rc1 boot (i.e., the one that
works)? I changed some ACPI PCI IRQ routing stuff in -mm1, and I
want to make sure that's not what's causing your lockup.
===================================================================

2.6.7-rc2-mm2 also had the same problem, I rebooted with "acpi=off" and it's OK.
.config settings ---
# Power management options (ACPI, APM)
# ACPI (Advanced Configuration and Power Interface) Support
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_SERIAL_8250_ACPI=y

Regards
Sid.

--
Sid Boyce .... Hamradio G3VBV and keen Flyer
Linux Only Shop.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/