2.6.7-rc1, 3com still broken after resume

From: David Ford
Date: Sun May 30 2004 - 23:49:34 EST

Next message: Dax Kelson: "Re: Why is proper NTFS-driver difficult?"
Previous message: Linus Torvalds: "Re: How to use floating point in a module?"
Next in thread: Christian Borntraeger: "Re: 2.6.7-rc1, 3com still broken after resume"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

May 30 21:37:39 powerix PM: Preparing system for suspend
May 30 23:56:44 powerix Stopping tasks: =====================================================================|
May 30 23:56:44 powerix PM: Entering state.
May 30 23:56:44 powerix Back to C!
May 30 23:56:44 powerix PM: Finishing up.
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1d.0 to 64
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1d.2 to 64
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1f.5 to 64
May 30 23:56:44 powerix PCI: Setting latency timer of device 0000:00:1f.6 to 64
May 30 23:56:44 powerix eth0: command 0x5800 did not complete! Status=0xffff
May 30 23:56:44 powerix eth0: command 0x2804 did not complete! Status=0xffff
May 30 23:56:44 powerix drivers/acpi/osl.c:737: spin_lock(drivers/acpi/osl.c:c170e620) already locked by drivers/acpi/osl.c
/737
May 30 23:56:44 powerix drivers/acpi/osl.c:756: spin_unlock(drivers/acpi/osl.c:c170e620) not locked
May 30 23:56:49 powerix Restarting tasks...<3>eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:49 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:49 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:49 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:49 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:49 powerix done
May 30 23:56:49 powerix logger: ACPI group ac_adapter / action ac_adapter is not defined
May 30 23:56:49 powerix logger: ACPI group battery / action battery is not defined
May 30 23:56:49 powerix logger: ACPI group battery / action battery is not defined
May 30 23:56:49 powerix cardmgr[7087]: executing: './network suspend eth2'
May 30 23:56:50 powerix cardmgr[7087]: + SCHEME: smvfd
May 30 23:56:50 powerix cardmgr[7087]: + ADDRESS: smvfd,2,0,00:02:2D:5C:18:9F
May 30 23:56:50 powerix cardmgr[7087]: + NEW_SCHEME:
May 30 23:56:50 powerix cardmgr[7087]: + KEY: D0D7C12E8BEBAD5C9D19828DAB
May 30 23:56:50 powerix cardmgr[7087]: shutting down socket 0
May 30 23:56:50 powerix cardmgr[7087]: shutting down socket 1
May 30 23:56:50 powerix cardmgr[7087]: executing: './network resume eth2'
May 30 23:56:50 powerix cardmgr[7087]: + SCHEME: smvfd
May 30 23:56:50 powerix cardmgr[7087]: + ADDRESS: smvfd,2,0,00:02:2D:5C:18:9F
May 30 23:56:50 powerix cardmgr[7087]: + NEW_SCHEME:
May 30 23:56:50 powerix cardmgr[7087]: + KEY: D0D7C12E8BEBAD5C9D19828DAB
May 30 23:56:50 powerix cardmgr[7087]: + ./network: line 28: /etc/init.d/net.eth2: No such file or directory
May 30 23:56:50 powerix cardmgr[7087]: resume cmd exited with status 127
May 30 23:56:56 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:56 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:56 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:56 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:56:56 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:04 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:04 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:04 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:04 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:04 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:11 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:23 powerix NETDEV WATCHDOG: eth0: transmit timed out
May 30 23:57:23 powerix eth0: transmit timed out, tx_status ff status ffff.
May 30 23:57:23 powerix diagnostics: net ffff media ffff dma ffffffff fifo ffff
May 30 23:57:23 powerix eth0: Transmitter encountered 16 collisions -- network cable problem?
May 30 23:57:23 powerix eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
May 30 23:57:23 powerix Flags; bus-master 1, dirty 0(0) current 16(0)
May 30 23:57:23 powerix Transmit list ffffffff vs. e74ed200.
May 30 23:57:23 powerix eth0: command 0x3002 did not complete! Status=0xffff
May 30 23:57:23 powerix 0: @e74ed200 length 8000002a status 0000002a
May 30 23:57:23 powerix 1: @e74ed2a0 length 8000002a status 0000002a
May 30 23:57:23 powerix 2: @e74ed340 length 8000002a status 0000002a
May 30 23:57:23 powerix 3: @e74ed3e0 length 8000002a status 0000002a
May 30 23:57:23 powerix 4: @e74ed480 length 8000004e status 0000004e
May 30 23:57:23 powerix 5: @e74ed520 length 8000002a status 0000002a
May 30 23:57:23 powerix 6: @e74ed5c0 length 8000002a status 0000002a
May 30 23:57:23 powerix 7: @e74ed660 length 8000002a status 0000002a
May 30 23:57:23 powerix 8: @e74ed700 length 8000002a status 0000002a
May 30 23:57:23 powerix 9: @e74ed7a0 length 8000004e status 0000004e
May 30 23:57:23 powerix 10: @e74ed840 length 8000002a status 0000002a
May 30 23:57:23 powerix 11: @e74ed8e0 length 8000002a status 0000002a
May 30 23:57:23 powerix 12: @e74ed980 length 8000002a status 0000002a
May 30 23:57:23 powerix 13: @e74eda20 length 8000002a status 0000002a
May 30 23:57:23 powerix 14: @e74edac0 length 8000004e status 8000004e
May 30 23:57:23 powerix 15: @e74edb60 length 8000002a status 8000002a
May 30 23:57:23 powerix eth0: command 0x5800 did not complete! Status=0xffff
May 30 23:57:23 powerix eth0: Resetting the Tx ring pointer.

The following chunk repeats every ~8 seconds forever after downing the interface. After resume, this interface is useless. Unfortunately this affects _everything_ for several seconds; harddrive, keyboard, mouse, screen updates, etc. Some events are queued, some are lost.

NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status ff status ffff.
diagnostics: net ffff media ffff dma ffffffff fifo ffff
eth0: Transmitter encountered 16 collisions -- network cable problem?
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 0(0) current 16(0)
Transmit list ffffffff vs. e74ed200.
eth0: command 0x3002 did not complete! Status=0xffff
0: @e74ed200 length 8000024e status 0000024e
1: @e74ed2a0 length 8000024e status 0000024e
2: @e74ed340 length 8000024e status 0000024e
3: @e74ed3e0 length 8000024e status 0000024e
4: @e74ed480 length 8000024e status 0000024e
5: @e74ed520 length 8000024e status 0000024e
6: @e74ed5c0 length 8000024e status 0000024e
7: @e74ed660 length 8000024e status 0000024e
8: @e74ed700 length 8000024e status 0000024e
9: @e74ed7a0 length 8000024e status 0000024e
10: @e74ed840 length 8000024e status 0000024e
11: @e74ed8e0 length 8000024e status 0000024e
12: @e74ed980 length 8000024e status 0000024e
13: @e74eda20 length 8000024e status 0000024e
14: @e74edac0 length 8000024e status 8000024e
15: @e74edb60 length 8000024e status 8000024e
eth0: command 0x5800 did not complete! Status=0xffff
eth0: Resetting the Tx ring pointer.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Dax Kelson: "Re: Why is proper NTFS-driver difficult?"
Previous message: Linus Torvalds: "Re: How to use floating point in a module?"
Next in thread: Christian Borntraeger: "Re: 2.6.7-rc1, 3com still broken after resume"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]