RivaTV not working for GeForce4 Ti 4800SE (fwd)

From: Justin Piszcz
Date: Sat May 29 2004 - 07:36:58 EST

Next message: Con Kolivas: "Re: [RFC][PATCH][2.6.6] Replacing CPU scheduler active and expired with a single array"
Previous message: Andi Kleen: "Re: [RFC][PATCH][2.6.6] Replacing CPU scheduler active and expiredwith a single array"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To LKML: What does that call trace mean, why did it do that? Because video/rivatv does NOT work right with SMP?

It worked after I loaded the right driver for the decoder =P

Kernel is tainted obviously, I do not believe the [nv] driver supports two monitors (at least I couldn't get it to work with that).

Therefore I use the nvidia binary driver.
Even though 3D crashes X as of driver 5536, oh well.

Another problem though, with dma=1 w/SMP it freezes.

Just modprobe rivatv though, it works ok.

Also, how do you get AUDIO+VIDEO to sync?
I have AUDIO -> LINE-INPUT -> SOUND CARD.
I have VIDEO -> NVIDIA GEFORCE4 TI4800SE CARD.

Also, why do I get this not implemented error?
(it says my card is fully supported on the page?)

rivatv: starting video capture
rivatv: stopping video capture
rivatv: V4L: Requested IOCTL (0x80685600) not implemented
rivatv: VIDIOCGCAP
rivatv: VIDIOCGCHAN
rivatv: VIDIOCGCHAN
rivatv: VIDIOCGMBUF
rivatv: MMAP buffer available in user space (6480 kb)
rivatv: VIDIOCSCHAN: 0
rivatv: VIDIOCGCHAN
rivatv: VIDIOCSCHAN: 0
rivatv: VIDIOCGCAP
rivatv: VIDIOCGPICT

Got a nasty error when playing w/mplayer:

rivatv: stopping video capture
Badness in pci_find_subsys at drivers/pci/search.c:167
Call Trace:
[<c0225ae6>] pci_find_subsys+0x102/0x11b
[<c0225b2e>] pci_find_device+0x2f/0x33
[<c0225b59>] pci_find_slot+0x27/0x4d
[<f8e36339>] os_pci_init_handle+0x33/0x5c [nvidia]
[<f8cca85f>] _nv001243rm+0x1f/0x24 [nvidia]
[<f8e11115>] _nv000816rm+0x2f5/0x384 [nvidia]
[<f8d7992c>] _nv003801rm+0xd8/0x100 [nvidia]
[<f8e10c4f>] _nv000809rm+0x2f/0x34 [nvidia]
[<f8d7a750>] _nv003816rm+0xf0/0x104 [nvidia]
[<f8d7b4c7>] _nv000013rm+0x77/0x84 [nvidia]
[<f8d7ae6b>] _nv003780rm+0x1df/0x2c8 [nvidia]
[<f8d7ac77>] _nv000012rm+0x43/0x58 [nvidia]
[<f8d7ac34>] _nv000012rm+0x0/0x58 [nvidia]
[<f8cbe69c>] _nv001219rm+0xa8/0x124 [nvidia]
[<f8cceeb6>] rm_run_rc_callback+0x36/0x4c [nvidia]
[<f8e3395f>] nv_kern_rc_timer+0x0/0x31 [nvidia]
[<f8e3396f>] nv_kern_rc_timer+0x10/0x31 [nvidia]
[<c01298e6>] run_timer_softirq+0xdb/0x1b7
[<c0125536>] do_softirq+0x6e/0xcd
[<c0116a77>] smp_apic_timer_interrupt+0x16a/0x16f
[<c010713a>] apic_timer_interrupt+0x1a/0x20
[<c0111d46>] get_offset_tsc+0x2/0x17
[<c010caba>] do_gettimeofday+0x1e/0xb6
[<c0124bac>] sys_gettimeofday+0x27/0xb6
[<c010674b>] syscall_call+0x7/0xb

Badness in pci_find_subsys at drivers/pci/search.c:167
Call Trace:
[<c0225ae6>] pci_find_subsys+0x102/0x11b
[<c0225b2e>] pci_find_device+0x2f/0x33
[<c0225b59>] pci_find_slot+0x27/0x4d
[<f8e36339>] os_pci_init_handle+0x33/0x5c [nvidia]
[<f8cca85f>] _nv001243rm+0x1f/0x24 [nvidia]
[<f8d7ba5d>] _nv003797rm+0xa9/0x128 [nvidia]
[<f8de84a1>] _nv001490rm+0x55/0xe4 [nvidia]
[<f8e11154>] _nv000816rm+0x334/0x384 [nvidia]
[<f8d7992c>] _nv003801rm+0xd8/0x100 [nvidia]
[<f8e10c4f>] _nv000809rm+0x2f/0x34 [nvidia]
[<f8d7a750>] _nv003816rm+0xf0/0x104 [nvidia]
[<f8d7b4c7>] _nv000013rm+0x77/0x84 [nvidia]
[<f8d7ae6b>] _nv003780rm+0x1df/0x2c8 [nvidia]
[<f8d7ac77>] _nv000012rm+0x43/0x58 [nvidia]
[<f8d7ac34>] _nv000012rm+0x0/0x58 [nvidia]
[<f8cbe69c>] _nv001219rm+0xa8/0x124 [nvidia]
[<f8cceeb6>] rm_run_rc_callback+0x36/0x4c [nvidia]
[<f8e3395f>] nv_kern_rc_timer+0x0/0x31 [nvidia]
[<f8e3396f>] nv_kern_rc_timer+0x10/0x31 [nvidia]
[<c01298e6>] run_timer_softirq+0xdb/0x1b7
[<c0125536>] do_softirq+0x6e/0xcd
[<c0116a77>] smp_apic_timer_interrupt+0x16a/0x16f
[<c010713a>] apic_timer_interrupt+0x1a/0x20
[<c0111d46>] get_offset_tsc+0x2/0x17
[<c010caba>] do_gettimeofday+0x1e/0xb6
[<c0124bac>] sys_gettimeofday+0x27/0xb6
[<c010674b>] syscall_call+0x7/0xb

---------- Forwarded message ----------
Date: Sat, 29 May 2004 05:13:44 -0400 (EDT)
From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
To: rivatv-help@xxxxxxxxxxxxxxxxxxxxx
Cc: rivatv@xxxxxxxxxxxxxxxxxxxxx
Subject: RivaTV not working for GeForce4 Ti 4800SE

When sending a bug report or support request
We always need information to be able to help you. Here's a list of what we may need. If unsure, include it!

* problem/bug description
* linux kernel version + UP or SMP
* RivaTV version (release or CVS + date)
* graphics card used (name, nVidia chip, decoder chip)
* some global system information (CPU, chipset, memory)
* video standard (NTSC/PAL/SECAM)
* X driver + version
* client software (xawtv/ffmpeg/mplayer/etc), if relevant
* relevant parts of your syslog (usually /var/log/messages or /var/log/syslog)
* output of cat /proc/drivers/rivatv? if available

1] Problem, no /dev/video*
2] Kernel 2.6.5 (SMP) (P4 w/HT)
3] RivaTV version: rivatv-0.8.5
4] Graphics Card:
01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4800 SE] (rev a1)
5] System: 2.6GHZ HT, Intel Chipset (ICH5), 2GB MEMORY
6] Video standard: NTSDC
7] X driver (NVIDIA) - Version, 5536, X Version 4.4.0
8] mplayer-1.0pre4, xawtv-3.91
9] dmesg

rivatv: Video4Linux driver for NVIDIA cards
rivatv: Version 0.8.5
rivatv: MMX processor extension enabled
rivatv: nVidia card found - rivatv0
rivatv: Identified your board as Gainward Ultra/750-8X GeForce4 Ti4800SE
rivatv: MTRR successfully enabled
rivatv: PCI nVidia NV20 card detected (GeForce4 Ti4800 SE [0x282], 128MB @ 0xF0000000)
rivatv: I2C adapter driver for NVIDIA cards
i2c_adapter i2c-6: warning: client_register seems to have failed for client 50
i2c_adapter i2c-7: warning: client_register seems to have failed for client 50
rivatv: procfs file registered for rivatv0
rivatv: allocated YUV capture buffer (812 kb)
rivatv: AGPGART: version 0.100
rivatv: AGPGART: aperture is 128MB @ 0xE8000000, AGP 1x 2x supported
rivatv: AGP: disabled
rivatv: Hash table layout: 16kB (11 bits) @ 0xF8710000
rivatv: NVdriver (nvidia) detected, DMA not supported
rivatv: successfully requested IRQ 16
rivatv: Video4Linux device driver registered
rivatv: no video decoder device registered
rivatv: no video decoder device registered
rivatv: no video decoder device registered
rivatv: successfully freed IRQ 16
rivatv: freeing YUV capture buffer (812 kb)
rivatv: procfs file unregistered for rivatv0
rivatv: Video4Linux driver for NVIDIA cards
rivatv: Version 0.8.5
rivatv: MMX processor extension enabled
rivatv: nVidia card found - rivatv0
rivatv: Identified your board as Gainward Ultra/750-8X GeForce4 Ti4800SE
rivatv: MTRR successfully enabled
rivatv: PCI nVidia NV20 card detected (GeForce4 Ti4800 SE [0x282], 128MB @ 0xF0000000)
rivatv: I2C adapter driver for NVIDIA cards
rivatv: chip registration requested: 1005 (eeprom)
i2c_adapter i2c-9: warning: client_register seems to have failed for client 50
rivatv: chip registration requested: 1005 (eeprom)
i2c_adapter i2c-10: warning: client_register seems to have failed for client 50
rivatv: procfs file registered for rivatv0
rivatv: allocated YUV capture buffer (812 kb)
rivatv: AGPGART: version 0.100
rivatv: AGPGART: aperture is 128MB @ 0xE8000000, AGP 1x 2x supported
rivatv: AGP: disabled
rivatv: Hash table layout: 16kB (11 bits) @ 0xF8710000
rivatv: NVdriver (nvidia) detected, DMA not supported
rivatv: RAMHT: 0xF8710000, RAMFC: 0xF8714000, RAMRO: 0xF8714A00
rivatv: successfully requested IRQ 16
rivatv: Video4Linux device driver registered
rivatv: no video decoder device registered
rivatv: no video decoder device registered
rivatv: no video decoder device registered

10] Output from /proc/drivers/rivatv:

$ cat rivatv0
nVidia Chip: GeForce4 Ti4800 SE
Model: Gainward Ultra/750-8X GeForce4 Ti4800SE
Architecture: NV20 (NV28)
Access: Control [0xf8000000-0xf8ffffff]
FB [0xf0000000-0xf7ffffff]
Interrupts: 0 out of 44156 (DMA: 0, Overlay: 0, Missing: 44156)
Device: available
VideoDecoder: unavailable
Tuner: unavailable
AudioDecoder: unavailable
AudioProcessor: unavailable
IR chip: unavailable

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Con Kolivas: "Re: [RFC][PATCH][2.6.6] Replacing CPU scheduler active and expired with a single array"
Previous message: Andi Kleen: "Re: [RFC][PATCH][2.6.6] Replacing CPU scheduler active and expiredwith a single array"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]