acpi problems w/ DL140s in recent kernels
From: Andres Salomon
Date: Thu May 27 2004 - 17:59:48 EST
2.6.5 through 2.6.7-rc1, as well as 2.4.26 fail to detect the onboard
nics on a few HP Proliant DL140s we have. 2.6.4, as well as 2.4.25 work
fine. I've attached the output of lspci, lspci -vvv, and dmesg while
running 2.4.25-bf24 (a Debian install kernel) and 2.6.7-rc1.
If any more info is needed, let me know. The machine that I've attached
the output from is a dual Xeon 2.4Ghz w/ hyperthreading; I've also seen
the same thing happen w/ single processor Xeons.
Linux version 2.4.25-bf2.4 (root@oss) (gcc version 3.2.3 (Debian)) #1 SMP Wed Mar 10 10:35:09 PST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec03000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
hm, page 000ff000 reserved twice.
hm, page 00100000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 000f9000 reserved twice.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f65f0
ACPI: RSDT (v001 A M I OEMRSDT 0x02000402 MSFT 0x00000097) @ 0x3fff0000
ACPI: FADT (v002 A M I OEMFACP 0x02000402 MSFT 0x00000097) @ 0x3fff0200
ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 MSFT 0x0100000d) @ 0x3fff6590
ACPI: MADT (v001 A M I OEMAPIC 0x02000402 MSFT 0x00000097) @ 0x3fff0300
ACPI: SPCR (v001 A M I OEMSPCR 0x02000402 MSFT 0x00000097) @ 0x3fff0400
ACPI: DSDT (v001 RCC GCSL 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 Pentium 4(tm) XEON(tm) APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Processor #130 invalid (max 16)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Processor #131 invalid (max 16)
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: HP Product ID: DL140 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEC01000.
I/O APIC #4 Version 17 at 0xFEC02000.
Enabling APIC mode: Flat. Using 3 I/O APICs
Processors: 2
Kernel command line: auto BOOT_IMAGE=LinuxOLD ro root=303
Initializing CPU#0
Detected 2399.398 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4784.12 BogoMIPS
Memory: 1032680k/1048512k available (1904k kernel code, 15444k reserved, 645k data, 108k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 1462.99 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4797.23 BogoMIPS
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Total of 2 processors activated (9581.36 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
Setting 3 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 3 ... ok.
Setting 4 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 4 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 3-0, 3-1, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
number of IO-APIC #4 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 003 03 0 0 0 0 0 1 1 69
0a 003 03 1 1 0 1 0 1 1 71
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 79
0d 003 03 0 0 0 0 0 1 1 81
0e 003 03 0 0 0 0 0 1 1 89
0f 003 03 0 0 0 0 0 1 1 91
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 003 03 1 1 0 1 0 1 1 99
03 003 03 1 1 0 1 0 1 1 A1
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 2 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ18 -> 1:2
IRQ19 -> 1:3
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2399.3063 MHz.
..... host bus clock speed is 133.2947 MHz.
cpu: 0, clocks: 1332947, slice: 444315
CPU0<T0:1332944,T1:888624,D:5,S:444315,C:1332947>
cpu: 1, clocks: 1332947, slice: 444315
CPU1<T0:1332944,T1:444304,D:10,S:444315,C:1332947>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0203] at 00:0f.0
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B2,I0,P0) -> 19
PCI->APIC IRQ transform: (B2,I0,P1) -> 18
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.20-k1
Copyright (c) 1999-2003 Intel Corporation.
tg3.c:v2.6 (February 3, 2004)
eth0: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:30:b1:ec
eth1: Tigon3 [partno(BCM95704A6) rev 2002 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:7f:30:b1:eb
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Mar 10 2004 10:37:12)
megaraid: v2.10.1 (Release Date: Wed Dec 3 15:34:42 EST 2003)
libata version 1.01 loaded.
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Fusion MPT base driver 2.05.11.03
Copyright (c) 1999-2003 LSI Logic Corporation
mptbase: 0 MPT adapters found, 0 installed.
Fusion MPT SCSI Host driver 2.05.11.03
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 108k freed
Adding Swap: 1951888k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:0f.0 ISA bridge: ServerWorks CSB6 South Bridge (rev a0)
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0)
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
0000:00:0f.3 Host bridge: ServerWorks GCLE-2 Host Bridge
0000:00:10.0 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
0000:00:10.2 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
0000:02:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device 001e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:00:0f.0 ISA bridge: ServerWorks CSB6 South Bridge (rev a0)
Subsystem: ServerWorks: Unknown device 0201
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0) (prog-if 8a [Master SecP PriP])
Subsystem: ServerWorks: Unknown device 0212
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks: Unknown device 0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K]
0000:00:0f.3 Host bridge: ServerWorks GCLE-2 Host Bridge
Subsystem: ServerWorks: Unknown device 0230
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:10.0 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: <available only to root>
0000:00:10.2 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: <available only to root>
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at febb0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
0000:02:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 02)
Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at febe0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>
000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
per-CPU timeslice cutoff: 1462.38 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4784.12 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
Total of 2 processors activated (9535.48 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2399.0037 MHz.
..... host bus clock speed is 133.0279 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0: online
domain 0: span 03
groups: 01 02
domain 1: span 03
groups: 03
CPU1: online
domain 0: span 03
groups: 02 01
domain 1: span 03
groups: 03
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 5008k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI-0562: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [IORG] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI-0562: *** Warning: Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [NRTH] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT]
ACPI: PCI Root Bridge [PCI1] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN01] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN02] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN03] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN04] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN05] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN06] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN07] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN08] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN09] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN20] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN21] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN22] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN23] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN24] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN25] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN26] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN27] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN28] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN29] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN30] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LN31] (IRQs 3 4 5 7 9 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
ACPI: PCI Interrupt Link [LNTE] (IRQs 11) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f4700
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x543a, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:0a: ioport range 0x480-0x49f has been reserved
pnp: 00:0a: ioport range 0x440-0x44f has been reserved
pnp: 00:0a: ioport range 0x4c0-0x4df could not be reserved
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
ACPI: PCI Interrupt Link [LNUS] enabled at IRQ 10
00:00:0f[A] -> 2-10 -> IRQ 10 level low
00:00:01[A] -> 3-0 -> IRQ 16 level low
00:00:01[B] -> 3-1 -> IRQ 17 level low
00:00:06[A] -> 3-6 -> IRQ 22 level low
00:00:06[B] -> 3-5 -> IRQ 21 level low
00:00:07[A] -> 3-8 -> IRQ 24 level low
00:00:07[B] -> 3-7 -> IRQ 23 level low
00:00:08[A] -> 3-10 -> IRQ 26 level low
00:00:08[B] -> 3-9 -> IRQ 25 level low
00:00:00[A] -> 3-3 -> IRQ 19 level low
00:00:00[B] -> 3-2 -> IRQ 18 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
number of IO-APIC #4 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 0FF 0F 0 0 0 0 0 1 1 51
06 0FF 0F 0 0 0 0 0 1 1 59
07 0FF 0F 0 0 0 0 0 1 1 61
08 0FF 0F 0 0 0 0 0 1 1 69
09 0FF 0F 0 1 0 1 0 1 1 71
0a 003 03 1 1 0 1 0 1 1 79
0b 0FF 0F 0 0 0 0 0 1 1 81
0c 0FF 0F 0 0 0 0 0 1 1 89
0d 0FF 0F 0 0 0 0 0 1 1 91
0e 0FF 0F 0 0 0 0 0 1 1 99
0f 0FF 0F 0 0 0 0 0 1 1 A1
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 A9
01 003 03 1 1 0 1 0 1 1 B1
02 003 03 1 1 0 1 0 1 1 32
03 003 03 1 1 0 1 0 1 1 E9
04 000 00 1 0 0 0 0 0 0 00
05 003 03 1 1 0 1 0 1 1 C1
06 003 03 1 1 0 1 0 1 1 B9
07 003 03 1 1 0 1 0 1 1 D1
08 003 03 1 1 0 1 0 1 1 C9
09 003 03 1 1 0 1 0 1 1 E1
0a 003 03 1 1 0 1 0 1 1 D9
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 2 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ17 -> 1:1
IRQ18 -> 1:2
IRQ19 -> 1:3
IRQ21 -> 1:5
IRQ22 -> 1:6
IRQ23 -> 1:7
IRQ24 -> 1:8
IRQ25 -> 1:9
IRQ26 -> 1:10
.................................... done.
PCI: Using ACPI for IRQ routing
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1085517259.4294966754:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5008 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
SvrWks CSB6: chipset revision 160
SvrWks CSB6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 6Y080L0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
Real Time Clock Driver v1.12
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0318560(lo)
IPv6 over IPv4 tunneling driver
input: AT Translated Set 2 keyboard on isa0060/serio0
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:0f.0 ISA bridge: ServerWorks CSB6 South Bridge (rev a0)
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0)
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05)
0000:00:0f.3 Host bridge: ServerWorks GCLE-2 Host Bridge
0000:00:10.0 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
0000:00:10.2 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
0000:00:00.0 Host bridge: ServerWorks GCNB-LE Host Bridge (rev 32)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:00.1 Host bridge: ServerWorks GCNB-LE Host Bridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device 001e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=fe9c0000]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 00020000 [disabled]
Capabilities: <available only to root>
0000:00:0f.0 ISA bridge: ServerWorks CSB6 South Bridge (rev a0)
Subsystem: ServerWorks: Unknown device 0201
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
0000:00:0f.1 IDE interface: ServerWorks CSB6 RAID/IDE Controller (rev a0) (prog-if 8a [Master SecP PriP])
Subsystem: ServerWorks: Unknown device 0212
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at ffa0 [size=16]
0000:00:0f.2 USB Controller: ServerWorks CSB6 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks: Unknown device 0220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe9fe000 (32-bit, non-prefetchable)
0000:00:0f.3 Host bridge: ServerWorks GCLE-2 Host Bridge
Subsystem: ServerWorks: Unknown device 0230
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:10.0 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: <available only to root>
0000:00:10.2 Host bridge: ServerWorks: Unknown device 0110 (rev 12)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: <available only to root>
Attachment:
signature.asc
Description: This is a digitally signed message part