Re: [Lse-tech] [RFC, PATCH] 1/5 rcu lock update: Add per-cpu batch counter

[Jack Steiner]

On Tue, May 25, 2004 at 07:35:20AM +0200, Manfred Spraul wrote:
> Hi,
> 
> Step one for reducing cacheline trashing within rcupdate.c:
> 
> The current code uses the rcu_cpu_mask bitmap both for keeping track
> of the cpus that haven't gone through a quiescent state and for
> checking if a cpu should look for quiescent states. The bitmap
> is frequently changed and the check is done by polling - 
> together this causes cache line trashing.
> 
.....



It looks like the patch fixes the problem that I saw.

I ran a 2.6.6+rcupatch kernel on a 512p system. Previously, this system
showed ALL cpus becoming ~50% busy when running a "ls" loop on a single
cpu.  This behavior is now fixed.

The following shows the system overhead on cpus 0-9 (higher cpus are
similar):


idle system
  CPU    0      1      2      3      4      5      6      7      8      9
      0.70   0.21   0.19   0.17   0.21   0.20   0.20   0.19   0.18   0.19
      0.72   0.21   0.18   0.17   0.21   0.21   0.21   0.20   0.18   0.19
      0.70   0.20   0.18   0.17   0.22   0.20   0.19   0.20   0.19   0.20
      0.71   0.19   0.18   0.17   0.21   0.20   0.19   0.20   0.18   0.19
      0.71   0.23   0.19   0.17   0.21   0.20   0.19   0.20   0.19   0.20


runnin "ls" loop on cpu 4 (the number for cpu4 is the ls command - NOT overhead)
  CPU    0      1      2      3      4      5      6      7      8      9
      0.83   2.08   0.31   0.29  97.87   1.25   0.32   0.32   0.32   0.33
      0.88   0.52   0.30   0.28  96.46   1.32   0.32   0.23   0.31   0.30
      0.84   1.27   0.31   0.29  97.15   1.38   0.33   0.31   0.31   0.31
      0.83   2.81   0.32   0.30  98.61   1.14   0.31   0.33   0.32   0.37
      0.84   2.32   0.32   0.40  97.91   1.43   0.33   0.43   0.32   0.36

There is a small increase in system overhead on all cpus but not the 50% seen
earlier.

I dont understand, however, why the overhead increased on cpus 1 & 5. This
may be a test anomaly but I suspect something else. I'll look into that later.

I also noticed one other anomaly. /proc/interrupts shows the number of interrupts
for each cpu. Under most circumstances, /proc/interrupts shows 1024 timer
interrupts/sec on each cpu. When the "ls" script is running, the number 
of timer interrupts/sec on the cpu running "ls" drops to ~650. I'm not
sure why (perhaps running too long somewhere with ints disabled). 

I'll look further....




-- 
Thanks

Jack Steiner (steiner@xxxxxxx)          651-683-5302
Principal Engineer                      SGI - Silicon Graphics, Inc.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/