Re: [speedste-centrino] couldn't enable Enhanced SpeedStep

[Bruno Ducrot]

On Sun, May 23, 2004 at 11:26:11AM +0200, Manuel Kasten wrote:
> Hello,
> 
> speedstep-centrino won't load on my laptop running 2.6.6 :
> 
> $ cat /var/log/dmesg | grep speedstep
> speedstep-centrino: found "Intel(R) Pentium(R) M processor 1500MHz": max
> frequency: 1500000kHz
> speedstep-centrino: couldn't enable Enhanced SpeedStep
> 
> 
...

> # CONFIG_X86_GX_SUSPMOD is not set
> CONFIG_X86_SPEEDSTEP_CENTRINO=y
> CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
> # CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set

Could you please try with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
enabled?  Sometimes, the BIOS would require that the OS take
ownership of the performance stuff..

Cheers,

-- 
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/