libata 2.6.5->2.6.6 regression -part II
From: Brad Campbell
Date: Mon May 17 2004 - 11:38:09 EST
G'day all,
I caught the suggestion on my last post in the archives, but because I'm not subscribed and wasn't
cc'd I can't keep it threaded.
I tried backing out the suggested acpi patch (No difference at all), and I managed to get apic to
work but it still hangs solid in the same place.
dmesg attached.
I managed to figure out that the VIA ATA driver captures my sata drives on the via ports, explaining
why sata_via misses them, but writing data to those drives (hde & hdg) causes dma timeouts and locks
the machine. No useful debug info produced. The machine becomes non-responsive, throws a couple of
dma timeouts to the console and then loses all interactivity (keyboard, serial, network) forcing a
reset push.
Is there any way I can prevent the VIA ATA driver capturing this device? Unfortunately my boot drive
is on hda on the on-board VIA ATA interface so I need it compiled in.
Please CC: me on any replies.
Regards,
Brad
nfsd: last server has exited
nfsd: unexporting all filesystems
rpciod: active tasks at shutdown?!
RPC: error 5 connecting to server localhost
RPC: failed to contact portmap (errno -5).
eth1: network connection down
md: stopping all md devices.
md: md0 switched to read-only mode.
Restarting system.
Press any key to continue.
Press any key to continue.
Press any key to continue.
GNU GRUB version 0.94 (625K lower / 523248K upper memory)
+-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line. Debian GNU/Linux, kernel 2.4.18-bf2.4 Debian GNU/Linux, kernel 2.4.18-bf2.4 (recovery mode) 2.4.25 2.4.27-pre1 Linux-2.6.5 Linux-2.6.6 Windows Redhat 2.4.7-10 The highlighted entry will be booted automatically in 5 seconds. Linux-2.6.5 Linux-2.6.6 Booting 'Linux-2.6.6'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /usr/src/linux-2.6.6/arch/i386/boot/bzImage vga=1 console=ttyS0,38400 c
onsole=tty0 root=/dev/hda1
[Linux-bzImage, setup=0x1200, size=0x177b2d]
savedefault
Linux version 2.6.6-bk3 (brad@srv) (gcc version 3.3.3 (Debian 20040401)) #4 Mon May 17 20:08:40 GST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126972 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f62a0
ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: vga=1 console=ttyS0,38400 console=tty0 root=/dev/hda1
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1916.546 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x50
Memory: 516068k/524272k available (1988k kernel code, 7448k reserved, 912k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3776.51 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(TM) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1916.0157 MHz.
..... host bus clock speed is 333.0244 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
SCSI subsystem initialized
testing the IO APIC.......................
.................................... done.
PCI: Using ACPI for IRQ routing
Simple Boot Flag at 0x3a set to 0x80
Machine check exception polling timer started.
devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.0, from 6 to 5
PCI: Via IRQ fixup for 0000:00:10.1, from 6 to 5
PCI: Via IRQ fixup for 0000:00:10.2, from 9 to 5
PCI: Via IRQ fixup for 0000:00:10.3, from 9 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0
VIA8237SATA: chipset revision 128
VIA8237SATA: 100% native mode on irq 20
ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD2000JB-00DUA3, ATA DISK drive
Using anticipatory io scheduler
ide2 at 0x8800-0x8807,0x8402 on irq 20
hdg: WDC WD2000JB-00FUA0, ATA DISK drive
ide3 at 0x8000-0x8007,0x7802 on irq 20
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0x6800-0x6807, BIOS settings: hda:DMA, hdb:pio
hda: WDC WD400EB-00CPF0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hde: max request size: 1024KiB
hde: 390625000 sectors (200000 MB) w/8192KiB Cache, CHS=24315/255/63
/dev/ide/host2/bus0/target0/lun0: p1
hdg: max request size: 1024KiB
hdg: Host Protected Area detected.
current capacity is 390719855 sectors (200048 MB)
native capacity is 390721968 sectors (200049 MB)
hdg: 390719855 sectors (200048 MB) w/8192KiB Cache, CHS=24321/255/63
/dev/ide/host2/bus1/target0/lun0: p1
hda: max request size: 128KiB
hda: Host Protected Area detected.
current capacity is 78159151 sectors (40017 MB)
native capacity is 78165360 sectors (40020 MB)
hda: 78159151 sectors (40017 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
ata1: SATA max UDMA/133 cmd 0xE080A200 ctl 0xE080A238 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xE080A280 ctl 0xE080A2B8 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xE080A300 ctl 0xE080A338 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xE080A380 ctl 0xE080A3B8 bmdma 0x0 irq 19
ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata3: dev 0 configured for UDMA/133
scsi2 : sata_promise
ata4: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata4: dev 0 configured for UDMA/133
scsi3 : sata_promise
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
ata5: SATA max UDMA/133 cmd 0xE080C200 ctl 0xE080C238 bmdma 0x0 irq 17
ata6: SATA max UDMA/133 cmd 0xE080C280 ctl 0xE080C2B8 bmdma 0x0 irq 17
ata7: SATA max UDMA/133 cmd 0xE080C300 ctl 0xE080C338 bmdma 0x0 irq 17
ata8: SATA max UDMA/133 cmd 0xE080C380 ctl 0xE080C3B8 bmdma 0x0 irq 17
ata5: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata5: dev 0 configured for UDMA/133
scsi4 : sata_promise
ata6: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata6: dev 0 configured for UDMA/133
scsi5 : sata_promise
ata7: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata7: dev 0 configured for UDMA/133
scsi6 : sata_promise
ata8: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata8: dev 0 configured for UDMA/133
scsi7 : sata_promise
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
ata9: SATA max UDMA/133 cmd 0xE080E200 ctl 0xE080E238 bmdma 0x0 irq 18
ata10: SATA max UDMA/133 cmd 0xE080E280 ctl 0xE080E2B8 bmdma 0x0 irq 18
ata11: SATA max UDMA/133 cmd 0xE080E300 ctl 0xE080E338 bmdma 0x0 irq 18
ata12: SATA max UDMA/133 cmd 0xE080E380 ctl 0xE080E3B8 bmdma 0x0 irq 18
ata9: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata9: dev 0 configured for UDMA/133
scsi8 : sata_promise
ata10: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
ata10: dev 0 configured for UDMA/133
scsi9 : sata_promise
ata11: no device found (phy stat 00000000)
scsi10 : sata_promise
ata12: no device found (phy stat 00000000)
scsi11 : sata_promise
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdc: drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
SCSI device sdd: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdd: drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1
Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0
SCSI device sde: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sde: drive cache: write through
/dev/scsi/host4/bus0/target0/lun0: p1
Attached scsi disk sde at scsi4, channel 0, id 0, lun 0
SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdf: drive cache: write through
/dev/scsi/host5/bus0/target0/lun0: p1
Attached scsi disk sdf at scsi5, channel 0, id 0, lun 0
SCSI device sdg: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdg: drive cache: write through
/dev/scsi/host6/bus0/target0/lun0: p1
Attached scsi disk sdg at scsi6, channel 0, id 0, lun 0
SCSI device sdh: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdh: drive cache: write through
/dev/scsi/host7/bus0/target0/lun0: p1
Attached scsi disk sdh at scsi7, channel 0, id 0, lun 0
SCSI device sdi: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sdi: drive cache: write through
/dev/scsi/host8/bus0/target0/lun0: